F25 电力安全监察 标准查询与下载



共找到 60 条与 电力安全监察 相关的标准,共 4

本标准规定了电力行业应急指挥中心场所、基础支撑系统、应用系统、应急指挥信息接入的技术条件。 本标准适用于电力行业应急指挥中心的规划、设计、建设和改造。

Technical guideline of power emergency command center

ICS
27.100
CCS
F25
发布
2014-10-15
实施
2015-03-01

This subpart implements section 30(b) of the Federal Power Act and provides procedures for obtaining an exemption for constructed or unconstructed small conduit hydroelectric facilities, as defined in §4.30(b)(30), from all or part of the requirements of Part I of the Federal Power Act, including licensing, and the regulations issued under Part I

Conservation of power and water resources. Part4:Licenses, permits, exemption ,and determination of project costs. SubpartJ:Exemption of small conduit hydroelectric facilities. Section4.90:Applicability and purpose.

ICS
CCS
F25
发布
2014-10-01
实施
2014-10-01

A notice of intent to construct a qualifying conduit hydropower facility submitted under this subpart must contain the following.

Conservation of power and water resources. Part4:Licenses, permits, exemption ,and determination of project costs. SubpartN:Notice of intent to construct qualifying conduit hydropower facilities. Section4.401:Contents of notice of intent to construct a qu

ICS
CCS
F25
发布
2014-10-01
实施
2014-10-01

This part implements section 30(a) of the Federal Power Act, as amended by the Hydropower Regulatory Efficiency Act of 2013, and provides procedures for obtaining a determination from the Commission that the facility to be constructed is a qualifying conduit hydropower facility, as defined in § 4.30(b)(26), and thus, is not required to be licensed under Part I of the FPA.

Conservation of power and water resources. Part4:Licenses, permits, exemption ,and determination of project costs. SubpartN:Notice of intent to construct qualifying conduit hydropower facilities. Section4.400:Applicability and purpose.

ICS
CCS
F25
发布
2014-10-01
实施
2014-10-01

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Functional safety requirements for insulation monitoring devices in IT systems and equipment f

ICS
17.220.20;29.080.01;29.240.01
CCS
F25
发布
2014-05-31
实施
2014-05-31

本标准规定了电站锅炉外部检验的检验周期、检验检测人员、检验申请、检验方法、检验准备、检 验范围、检验内容及要求、检验结论、检验报告等。 本标准适用于福建省电站锅炉外部检验。

Code for External Inspection of Power Plant Boilers

ICS
27.100
CCS
F25
发布
2013-12-31
实施
2014-03-10

本标准规定了电力系统动态记录装置的技术要求、试验方法、检验规则以及对标识、包装、运输、储存的要求。本标准适用于220kV及以下电压等级的电力系统动态记录装置(以下简称“装置”), 是装置设计、制造、检验和运行的依据。110kV及以下电压等级电网和发电厂的装置可参照本标准执行。

General specification of power system dynamic recording equipment

ICS
29.24
CCS
F25
发布
2013-11-28
实施
2014-04-01

本规程规定了变电站(含开关站、换流站)施工过程中为确保施工人员的生命安全和身体健康应遵守的安全施工要求和应采取的措施。本规程适用于新建、改建、扩建的交流1000kV及以下变电站、直流±800kV及以下换流站工程的施工。

Code of safety operation in power engineering construction.Part 3: substation

ICS
29.240.10
CCS
F25
发布
2013-11-28
实施
2014-04-01

本规程适用于新建、改建、扩建的交流35kV、直流±400kV(含接地极线路)及以上架空输电线路和10kV (含6kV)及以上电力电缆线路的施工。

Code of safety operation in power engineering construction.Part 2: Power transmission line

ICS
29.240.20
CCS
F25
发布
2013-11-28
实施
2014-04-01

本标准规定了农村低压电网安全工作的基本要求和保证安全的措施。 本标准适用于1000V以下农村电网建设与改造、运行维护、经营管理。

The rural low-voltage electric safe working code

ICS
29.020
CCS
F25
发布
2011-01-09
实施
2011-05-01

本标准规定了火力发电企业生产安全设施的基本配置要求。 本标准适用于火力发电企业生产环节涉及的场所、设备、设施及特定区域。

Configuration for work safety device of fossil fuel power enterprise

ICS
27.100
CCS
F25
发布
2009-07-22
实施
2009-12-01

IEC 61850-7-410 is part of the IEC 61850 series. This part of IEC 61850 specifies the additional common data classes, logical nodes and data objects required for the use of IEC 61850 in a hydropower plant. The Logical Nodes and Data Objects defined in this part of IEC 61850 belong to the following fields of use: ? Electrical functions. This group includes LN and DO used for various control functions, essentially related to the excitation of the generator. New LN and DO defined within this group are not specific to hydropower plants; they are more or less general for all types of larger power plants. ? Mechanical functions. This group includes functions related to the turbine and associated equipment. The specifications of this document are intended for hydropower plants, modifications might be required for application to other types of generating plants. Some more generic functions are though defined under Logical Node group K. ? Hydrological functions. This group of functions includes objects related to water flow, control and management of reservoirs and dams. Although specific for hydropower plants, the LN and DO defined here can also be used for other types of utility water management systems. ? Sensors. A power plant will need sensors providing measurements of other than electrical data. With a few exceptions, such sensors are of general nature and not specific for hydropower plants. NOTE All Logical Nodes with names not starting with the letter “H” will be included in a future edition 2 of IEC 61850-7-4. When that document is published, the Logical Nodes in IEC 61850-7-4 (Edition 2) will take precedence over Logical Nodes with the same name in this part IEC 61850-7-410.

Communication networks and systems for power utility automation - Hydroelectric power plants - Communication for monitoring and control

ICS
33.040.40
CCS
F25
发布
2007-12-31
实施
2007-12-31

本标准规定了电力工程勘测安全技术的基本要求。 本标准适用于电力工程勘测设计工作。

Safety technical regulations for survey and exploration of electrical power engineering

ICS
13.100
CCS
F25
发布
2006-05-06
实施
2006-10-01

本部分规定了架空电力线路施工过程中为确保施工人员的生命安全和身体健康,应遵守的安全施工、文明施工的要求和应采取的措施。 本部分适用于新建、改建、扩建的110kV~500kV架空电力线路的施工。35kV~63kV及750kV架空电力线路的施工可参照执行。

Code of safety operation in power engineering construction.Part 2: power transmission line

ICS
27.100
CCS
F25
发布
2004-12-14
实施
2005-06-01

本标准规定了从事电力工业锅炉压力容器和主要汽水管道的安全监督管瑾 (检验〉 工程师等级划 分、 职责和资格等级考核的原则和方法= 本标准适用于从事电力行业锅炉压力容器、 压力管遣安全监督管理 (检验〉 工程师的资格审查、 培训、 考核、 发证等工作。

Examination code for qualification of boiler and pressure vessel safety supervising engineer and inspection engineer of electric power industry

ICS
03.100.30
CCS
F25
发布
2004-03-09
实施
2004-06-01

Inspection code for boiler and pressure vessel in thermal power plant

ICS
27.100
CCS
F25
发布
2004-03-09
实施
2004-06-01

本标准规定了电站在役给水加热器铁磁性钢管远场涡流检验的内容、检验方法、检验设备及检验 结果评定方法。 本标准适用于外徑为25mm一上5mm、壁厚为 0.7l1mm一3.0mm 范圍的在役給水加熱器鐵磁性鋼管 的远场涡流检验。其他用途及规格的铁磁性钢管的检验可参照执行。

Technical guide of remote fielding eddy inspecting for steel tubes of in-service feedwater booster in power plants

ICS
23.040.01
CCS
F25
发布
2004-03-09
实施
2004-06-01

Regulations for Inspection of Boiler and Pressure Vessels in Power Plants

ICS
27.100
CCS
F25
发布
2004-03-09
实施
2004-06-01

本规程规定了在役的水利水电工程钢闸门 (含拦污栅,下同〉 和启闭机安全检测的内容和保证检 测质量的技术要求〉 适用于水利水电大、 中型工程的钢闸门和启闭机。 小型工程的钢闸门和启闭机可 参照执行。

Technical code of safety inspection for hydraulic steel gate and hoist machinery

ICS
27.140
CCS
F25
发布
2003-01-09
实施
2003-06-01

Code of safety operation in power engineering construction Part 1: Steam power plants

ICS
27.100
CCS
F25
发布
2002-09-16
实施
2002-12-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号