G39 胶粘剂 标准查询与下载
共找到 596 条与 胶粘剂 相关的标准，共 40 页
本标准规定通用型聚丙烯压敏胶黏带系列的产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存的要求。 本标准适用于以双向拉伸聚丙烯薄膜（BOPP）为基材，将压敏胶黏剂均匀地涂布在聚丙烯薄膜的处理面，再经裁切而制成的聚丙烯（BOPP）压敏胶黏带系列产品，该产品主要用于包装、封缄、捆扎、粘贴和上光膜等。
Pressure sensitive adhesives tapes of BOPP for general purpose
- ICS
- 83.180
- CCS
- G39
- 发布
- 2008-09-18
- 实施
- 2009-05-01
本标准规定了压敏胶黏制品的制造、使用和回收的技术、安全和环保要求。 本标准适用于各种基材的压敏胶黏制品的制造、使用和回收。 压敏胶黏制品包括压敏胶黏带、压敏胶黏标签、压敏胶黏片三类产品。
Guide for manufacture,application and recycle of pressure sensitive adhesive products
- ICS
- 83.180
- CCS
- G39
- 发布
- 2008-09-18
- 实施
- 2009-05-01
本标准规定了木材工业胶粘剂和纸张浸渍用脲醛、酚醛、三聚氰胺甲醛树脂的分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于以尿素、苯酚、三聚氰胺与甲醛为主要原料，经缩聚反应合成的各种木材胶粘剂和纸张浸渍合成用树脂；本标准也适用于三聚氰胺、苯酚、尿素的部分互相代替及用间苯二酚代替部分苯酚共缩聚的合成树脂。 本标准不适用于乳液酚醛树脂。
Wood adhesives:urea formaldehyde,phenol formaldehyde and melamine formaldehyde resins
- ICS
- 83.180
- CCS
- G39
- 发布
- 2006-05-18
- 实施
- 2006-10-15
本标准规定了使用旋转粘度计和粘度杯测定胶粘剂粘度方法。 本标准旋转粘度计法适用于牛顿流体或近似牛顿流体特性的胶粘剂粘度测定。 本标准的粘度杯法适用于50mL试样流出时间在30～100s内胶粘剂粘度测定。
Determination methods for viscosity of adhesives
- ICS
- 83.180
- CCS
- G39
- 发布
- 1995-12-20
- 实施
- 1996-08-01
本标准规定了各种类型胶粘剂耐化学试剂的测试方法。该方法利用胶粘剂胶接的金属试样在一定的试验液体中、一定温度下浸泡规定时间后粘接强度的降低衡量胶粘剂的耐化学试剂性能。 本标准适用于各种类型胶粘剂。
Test method for resistance of adhesive bonds to chemical reagents—Metal to metal
- ICS
- 83.180
- CCS
- G39
- 发布
- 1992-01-14
- 实施
- 1992-12-01
Sealant material in terrestrial photovoltaic (PV) modules—Silicone sealant
- ICS
- CCS
- G39
- 发布
- 实施
Upper and lower adhesive tapes for packaging electronic components
- ICS
- 83.180
- CCS
- G39
- 发布
- 2022-09-30
- 实施
- 2023-04-01
Acrylate-based heat-curing impregnation sealant for metal die castings
- ICS
- 83.180
- CCS
- G39
- 发布
- 2022-09-30
- 实施
- 2023-04-01
General purpose biaxially oriented polypropylene film pressure sensitive adhesive tape
- ICS
- 83.180
- CCS
- G39
- 发布
- 2022-09-30
- 实施
- 2023-04-01
Hot melt pressure-sensitive adhesive for polymer waterproof membrane
- ICS
- 83.18
- CCS
- G39
- 发布
- 2021-12-02
- 实施
- 2022-04-01
Additive silicone sealant for LED lighting devices
- ICS
- 83.18
- CCS
- G39
- 发布
- 2021-12-02
- 实施
- 2022-04-01
Linerless aluminum foil pressure sensitive adhesive tape
- ICS
- 83.18
- CCS
- G39
- 发布
- 2021-12-02
- 实施
- 2022-04-01
This document specifies a series of methods for the determination of the ability of a pressure sensitive tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate. This document contains: - method A: Self-adhesive tapes - Measurement
Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018); German version EN ISO 29863:2019
- ICS
- 83.180
- CCS
- G39
- 发布
- 2021-12-01
- 实施
This document specifies characteristics for adhesives for floor coverings, which comprise:- resilient floor coverings (such as those manufactured from plastics, linoleum or rubber);- textile floor coverings.Adhesives for floor coverings are intended for use within a building acco
Adhesives - Adhesives for floor coverings - Requirements for mechanical and electrical performance (ISO 22636:2020); German version EN ISO 22636:2020
- ICS
- CCS
- G39
- 发布
- 2021-02-00
- 实施
Direct Printable Polypropylene Film (BOPP) Pressure Sensitive Adhesive Tape and Linerless Cold Lamination Film Pressure Sensitive Adhesive Tape (2020)
- ICS
- CCS
- G39
- 发布
- 2020-12-09
- 实施
- 2021-04-01
Dimer acid type polyamide adhesive
- ICS
- 83.180
- CCS
- G39
- 发布
- 2019-12-24
- 实施
- 2020-07-01
Shock absorbing sealant for automobiles
- ICS
- 83.180
- CCS
- G39
- 发布
- 2019-12-24
- 实施
- 2020-07-01
