G41 轮胎 标准查询与下载

T/CMA HG027-2021 载重汽车轮胎均匀性试验机和动平衡试验机校准用轮胎

Tires for truck tire uniformity testing machine and dynamic balancing testing machine calibration

T/CMA HG029-2021 轮胎雪地抓着性能测试道路制作及道路验收和维护

Road production, road acceptance and maintenance for tire snow gripping performance test

T/CMA HG026-2021 轿车轮胎均匀性试验机和动平衡试验机校准用轮胎

Tires for calibration of car tire uniformity testing machine and dynamic balancing testing machine

JIS D 9422:2021 自行车轮胎气门嘴

Tire valves for bicycles

ISO 18808:2021 工程机械用农用轮胎

This document specifies the designation, dimensions, approved rim contours, load ratings and reference speeds for agricultural tyres fitted to construction machines (e.g. backhoe loaders, small dumpers, loaders, excavators) operating on building sites under loading and transport conditions. Tyres conforming to this document are identified by the suffix IND in the tyre size designation; code designated tyres can alternatively, in place of the suffix IND, be identified by the classification code R-4. NOTE Agricultural tyres without the suffix IND in the tyre size designation or with a classification code differing from “R-4” are not part of this document. Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines are part of ISO 4251-1 and ISO 4251-2. Code designated radial tyres for agricultural tractors, trailers and machines are part of ISO 8664. Metric designated tyres for agricultural tractors, trailers and machines are part of ISO 7867-2. Tyres for forestry machines, identified by suffix LS, or classification code LS-x are part of ISO 18807.

Agricultural tyres for construction machines

T/CRIA 11005-2021 涂覆式刺扎自密封轮胎评价规范

4.基本要求 5.检验规则 6.评价规则 7.评价批准 8.标识规格及使用 9.产品质量责任

Evaluation specification for coated punctured self-sealing tire

ISO 5775-2:2021 自行车轮胎和轮辋. 第2部分: 轮辋

This document specifies tyre fitting relevant geometrical dimensions and designations for straight-side (SS, TSS) type, hooked bead (HB) type and crotchet (C, TC) type bicycle rims.

Bicycle tyres and rims - Part 2: Rims

ISO 23475-1:2021 钢制轮胎帘线试验方法第1部分：一般要求

This document specifies test methods of steel cords which are used for tyre reinforcement. Dimension, process properties, mechanical properties and coating test method are all included.

Testing method for steel tyre cord - Part 1: General requirements

T/CRIA 12001-2020 自行车轮胎、电动自行车轮胎和摩托车轮胎特级产品评价规范

4.评价原则和方法 4.1 评价原则 4.2评价方法和流程 5.评价要求 6.试验方法

Evaluation specification for special grade products of bicycle tires, electric bicycle tires and motorcycle tires

NF T47-749:2020 确定重复使用的轻型车辆轮胎（PR）分类的控制和质量标准

Le présent document s'applique aux pneus triés en vue de leur réemploi par des collecteurs agrées ou professionnels spécialisés pouvant justifier de la provenance légale des pneumatiques. Il permet de classifier les pneus en fonction de critère de contrôle tel que l'état, l'appar

Determination of control and quality criteria for the classification of reused light vehicle tires (PR)

T/CMA HG016-2020 225/60R16 98S标准测试轮胎技术规范

      本标准规定了 225/60R16 98S标准测试轮胎的术语和定义、设计和结构、材料和制造、物理性能、工艺及轮廓尺寸、帘线角度和花纹、成品要求、测试方法、合格证书、贮存、包装和运输、使用要求、使用期限。       本标准适用于 225/60R16 98S标准测试轮胎（以下简称标准测试轮胎）。该标准测试轮胎主要用于轮胎冰路面抓着性能评估，也可以用于其他评估，如冰路面特性、设备校准及其他需要使用标准测试轮胎的评估。

225/60R16 98S standard test tire technical specification

T/CMA HG019-2020 轮胎试验路面摩擦系数测量方法--摆式仪测定法

主要内容：规定测试仪器的一般要求，如：材料技术要求、仪器的构造要求、测试步骤和修正说明等。

Method for Measuring Friction Coefficient of Tire Test Pavement--Pendulum Measuring Method

T/CMA HG018-2020 轮胎试验路面平整度测量方法--连续式平整度仪法

主要内容：试验方法规定了使用连续式平整度仪测定平整度的一般要求，如:测试仪器、路表面、测试步骤和计算方法等等的要求。

Measuring method for flatness of tire test road surface--continuous flatness meter method

T/CMA HG021-2020 轮胎试验路面构造深度测量方法 手工铺砂法

主要内容：试验方法规定了使用三米直尺测定路表面的平整度的一般要求，如:测试仪器、路表面、测试步骤和计算方法等等的要求。

Method for measuring depth of tire test pavement structure Manual sanding method

T/CMA HG020-2020 轮胎试验路面平整度测量方法--3米直尺法

主要内容：试验方法规定了使用三米直尺测定路表面的平整度的一般要求，如:测试仪器、路表面、测试步骤和计算方法等等的要求。

Measuring method for flatness of tire test road surface--3-meter ruler method

T/CRIA 22005-2019 轮胎模具 弹簧气套

1范围 2.规范性引用文件 3.术语和定义 4结构型式 5.要求 6检验方法 7检验规则 8标志，包装，运输和贮存

tire mold spring air sleeve

HG/T 5449-2018 轮胎气门嘴螺纹量规

Tire valve thread gauge

HG/T 5447-2018 安装轮胎气压监测系统的卡扣式轮胎气门嘴

Snap-on tire valves with tire pressure monitoring systems installed

HG/T 5448-2018 安装轮胎气压监测系统的压紧式轮胎气门嘴

Installation of pinch-type tire valves with tire pressure monitoring systems

ISO 16992:2018 乘用车轮胎. 备用设备代替设备(SUSE)

This document describes spare unit substitutive equipment (SUSE) for passenger car tyres, which is designed to enable users to continue their journey (with or without a stop) in a reasonably safe manner. NOTE 1 Certain equipment becomes effective automatically, thus avoiding the need to stop the vehicle immediately for inspection and corrective action. This document is intended only to qualify the performance of SUSE systems. Its specifications only apply to SUSE systems that can permit the extended mobility of the vehicle. NOTE 2 Other types of SUSE are described in Annexes A and B. The specifications in this document apply from the moment the SUSE system becomes effective, with the driver continuing to control the vehicle (in terms of speed and direction) in an attempt to reach an appropriate place for servicing. The following are within the scope of this document: — the description of the various types of SUSE; — the description and performance levels of complete SUSE systems. NOTE 3 The performance level that the user reasonably has the right to expect, as well as the restrictive conditions placed upon that level, can vary to a large degree depending on the equipment installed and on the real operating conditions of the tyre in flat-tyre running mode. The following are outside the scope of this document: — the vehicle to be equipped; — the tyre while operating in inflated mode; — the characteristics of the pressure survey device and of the warning function relative to the inflated mode or to the partially deflated mode due to slow pressure losses; — the transitory phase, if any, before the equipment becomes effective; — the inspection, assessment, and the servicing of the SUSE system, after it has been activated in flat tyre running mode.

Passenger car tyres - Spare unit substitutive equipment (SUSE)