共找到 195 条与 水处理剂基础标准与通用方法 相关的标准,共 13 页
Method for determination of carboxylate and sulfonate polymer content in circulating cooling water
Technical specifications for treating heavy metal wastewater using ion exchange technology
Evaluation method for antiscaling performance of reverse osmosis antiscalants
Evaluation of scale inhibition performance of reverse osmosis antiscalants and determination method of carboxylate and sulfonate polymer content in circulating cooling water (2017)
Methods for analysis of boiler water and cooling water Determination of trace amounts of copper, iron, zinc and aluminum Graphite furnace atomic absorption spectrometry
本标准规定了以市政水、地表水、地下水和非传统水源水作为补充水源的,集中空调循环水系统、水温不超过95℃的集中供暖循环热水系统的补充水与循环水以及作为冷却水源的水源热泵直流冷却水系统的水处理技术要求。 本标准适用于新建、扩建、改建的工业与民用建筑工程的供暖空调系统水处理设计、施工和运营管理。
Technical specification for water treatment of heating and air conditioning system
本标准规定了锅炉用水和冷却水中钙、镁、铁、锌、铜含量的测定方法电感耦合等离子体发射光谱法。 本标准适用于锅炉用水和冷却水中钙、镁、铁、锌、铜含量的测定,也适用于各种工业用水、原水和生活用水中钙、镁、铁、锌、铜含量的测定。该方法适用于钙含量0.02 mg/L~200 mg/L、镁含量0.02 mg/L~200 mg/L、铁含量 0. 02 mg/L~100 mg/L、锌含量 0. 02 mg/L~100 mg/L、铜含量0.02 mg/L~100 mg/L范围的测定。
Industrial circulating cooling water and boiler water.Determination of calcium magnesium, iron, zinc and copper.Inductively Coupled Plasma method
本标准规定了化工企业水处理利用过程中水网络系统CO排放量计算方法。 本标准适用于化工企业水处理利用过程中水网络系统CO排放量的量化。
The calculation method of CO2 emission for a corporate water network in chemical industry
本标准规定了以聚磷酸盐、锌盐为预膜剂的工业循环冷却水磷锌预膜液中钙离子含量的测定方法EDTA滴定法。 本标准适用于工业循环冷却水磷锌预膜液中钙离子含量在20 mg/L~200 mg/L的测定。
Determination of calcium for phosphorus-zine prefilming fluid in industrial circulating cooling water
Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate
本标准规定了循环冷却水中聚环氧琥珀酸含量的测定方法氯化频哪氰醇分光光度法。本标准适用于循环冷却水系统中聚环氧琥珀酸含量为0.25 mg/L~5 mg/L的测定,高浓度含量样品的测定可通过适当稀释完成。本标准不适用于含有其它羧酸根离子的循环水系统中聚环氧琥珀酸含量的测定。
Circulating cooling water.Determination of polyepoxysuecinic acid
本标准规定了水处理剂抑制碳酸钙析出的阻垢性能的测定极限碳酸盐法。本标准适用于水处理剂抑制碳酸钙析出的阻垢性能的评定。
Water treatment chemicals.Determination of scale inhibition performance.Limited carbonate method
本标准规定了水处理剂缓蚀性能测定的动电位极化测量方法。本标准适用于水处理剂缓蚀性能的测定以及水环境中金属材料的耐蚀性能评价。
Water treatment chemicals.Determination of corrosion inhibition performance.Potentiodynamic polarization method
本标准所使用的强酸具有腐蚀性,使用时应避免吸入或接触皮肤。溅到身上应立即用大量水冲洗,严重时应立即就医。 本标准规定了工业循环冷却水中低含量总铁、可溶性铁和二价铁含量的测定方法。 本标准适用于含量为5μg/L~50μg/L的铁的测定。本标准也适用于锅炉用水及原水中低含量铁的测定。
Industrial circulating cooling water.Determination of iron content.Spectrometric method using 1,10-phenathroline
本标准规定了工业循环冷却水中苯骈三氮唑的测定方法。 本标准适用于循环冷却水系统中苯骈三氮唑的测定,也适用于复配药剂中苯骈三氮唑的测定。测定范围0.4mg/L~20mg/L.
Industrial circulating cooling water.Determination of benzotriazole
警告:本标准所使用的强酸、强碱具有腐蚀性,使用时应避免吸入或接触皮肤。溅到身上应立即用大量水冲洗,严重时应立即就医。 范围:本标准规定了工业循环冷却水污垢和腐蚀产物试样的采取和制备方法。 本标准适用于工厂检修时循环冷却水系统中污垢和腐蚀产物试样的采取和制备。
Industrial circulating cooling water.Sampling and production for sludge and corrosion products
本标准所使用的强酸、强碱具有腐蚀性,使用时应避免吸入或接触皮肤。溅到身上应立即用大量水冲洗,严重时应立即就医。 本标准规定了工业循环冷却水污垢和腐蚀产物中硅酸盐(以SiO2计)的测定方法。 本标准适用于工业循环冷却水系统中污垢和腐蚀产物的测定。
Industrial circulating cooling water.Determination of undissolved material in silicate for sludge and corrosion products
本标准规定了化学清洗时清洗液中总铁含量的测定方法。本标准适用于清洗液中可溶性总铁以及含不溶铁、铁氧化物或铁络合物等的总铁含量的测定。
Pickling solution.Determination of total iron content
本标准所使用的强酸具有腐蚀性,使用时应避免吸入或接触皮肤。溅到身上应立即用大量水冲洗,严重时应立即就医。 本标准规定了再生水中钙、镁含量的测定方法——原子吸收光谱法。 本标准适用于再生水中钙含量范围为0.5mg/L~25mg/L、镁含量范围为0.1mg/L~5mg/L的测定。对于钙、镁含量高的再生水水样,可稀释后测定。
Reclaimed water.Determination of calcium and magnesium.Atomic absorption spectromic method
本标准所使用的强酸、强碱具有腐蚀性,使用时应避免吸入或接触皮肤。溅到身上应立即用大量水冲洗,严重时应立即就医。 本标准规定了再生水中镍、铜、锌、镉、铅含量的测定方法——原子吸收光谱法。 本标准适用于再生水的测定,该方法适用于镍含量0.01mg/L~10mg/L、铜含量为0.01mg/L~10mg/L;锌含量0.005mg/L~5mg/L;镉含量0.005mg/L~5mg/L;铅含量0.01mg/L~10mg/L范围的测定。该方法不适用于化学需氧量(COD)超过500mg/L的再生水。
Reclaimed water.Determination of nickel,copper,zinc,cadmium and lead.Atomic absorption spectromic method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号