G81 感光材料 标准查询与下载

KS A ISO 18925:2006 成像材料.光盘媒介.储存试验

이 규격은 광디스크의 보관 기간을 늘리기 위한 보관 환경과 적합한 보관 조건, 보관 시설,

Imaging materials-Optical disc media-Storage practices

BS ISO 11084-2:2006 图形技术.照相材料、金属箔和纸张的定位系统.图版制作定位销系统

This part of ISO 11084 specifies the shapes, dimensions and positions for the pins and holes of a register system used to achieve accurate image positioning on a printing forme during the plate-making operations undertaken during the printing forme preparation process. It is also applicable to plate-bending equipment and transfer systems required to convert between register pin systems. This part of ISO 11084 is applicable to prepress pin registering system for plate making using printing formes ≥ 420 mm x 594 mm (A2). It is applicable by analogy to the pin register systems of printing presses.

Graphic technology - Register systems for photographic materials, foils and paper - Register pin systems for plate making

ISO 18909:2006 摄影.处理过的摄影彩色胶片和纸张印迹.测量呈象稳定度方法

This International Standard describes test methods for determining the long-term dark storage stability of colour photographic images and the colour stability of such images when subjected to certain illuminants at specified temperatures and relative humidities. This International Standard is applicable to colour photographic images made with traditional, continuous-tone photographic materials with images formed with dyes. These images are generated with chromogenic, silver dye-bleach, dye transfer, and dye-diffusion-transfer instant systems. The tests have not been verified for evaluating the stability of colour images produced with dry- and liquid-toner electrophotography, thermal dye transfer (sometimes called dye sublimation), ink jet, pigment-gelatine systems, offset lithography, gravure and related colour imaging systems. This International Standard does not include test procedures for the physical stability of images, supports or binder materials. However, it is recognized that in some instances, physical degradation such as support embrittlement, emulsion cracking or delamination of an image layer from its support, rather than image stability, will determine the useful life of a colour film or print material.

Photography - Processed photographic colour films and paper prints - Methods for measuring image stability

ISO 11084-2:2006 图形技术.照相材料、金属箔和纸张的定位系统.第2部分:图版制作定位销

This part of ISO 11084 specifies the shapes, dimensions and positions for the pins and holes of a register system used to achieve accurate image positioning on a printing forme during the plate-making operations undertaken during the printing forme preparation process. It is also applicable to plate-bending equipment and transfer systems required to convert between register pin systems. This part of ISO 11084 is applicable to prepress pin registering system for plate making using printing formes ≥ 420 mm x 594 mm (A2). It is applicable by analogy to the pin register systems of printing presses.

Graphic technology - Register systems for photographic materials, foils and paper - Part 2: Register pin systems for plate making

BS ISO 18935:2006 成像材料.版样上的彩色图像.印制彩色图像的室内防水性测定

ISO 18935:2005 specifies tests to determine the relative indoor water resistance of printed colour images. ISO 18935:2005 is applicable to both digital and analogue prints.

Imaging materials - Colour images on paper prints - Determination of indoor water resistance of printed colour images

HG/T 3805-2005 背喷灯箱片

本标准规定了背喷灯箱片的技术要求、测试方法、检验规则、包装及标志、贮存和运输。 本标准适用于在聚酯片基上涂布染料型影像接受层而制成的背喷灯箱片。

Back light inkjet film

HG/T 3804-2006 阳图热敏CTP版

Yang pattern thermal CTP version

HG/T 3805-2006 背喷灯箱片

Back spray lamp box piece

HG/T 3804-2005 阳图热敏CTP版

本标准规定了阳图热敏CTP版的技术要求、测试方法、检验规则、包装及标志、贮存和运输。 本标准适用于以铝版基为支持体涂布热敏层而制成的阳图热敏CTP版。用于波长为830mm激光光源的计算机直接制版机的制版。

Positive thermal CTP plates

ASTM E312-06(2011) 使用模拟(胶片)相机和数字静止相机(DSC)对摄影样片条件进行描述和选择的标准操作规程

This practice provides a basis for choosing, specifying, recording, communicating, and standardizing the conditions and processes that determine the nature of a photographic image of a specimen. Its provisions are particularly useful when the photographic image is used to preserve or communicate the appearance of a specimen involved in an aging or stressing test that affects its appearance. It is often useful to compare photographs made under identical conditions before and after a test to illustrate a change in appearance. This practice deals with specific details of camera technique and the photographic process, so it will probably be best understood and implemented by a technical photographer or someone trained in photographic science. The person requiring the photograph must clearly indicate to the photographer what features of the specimen are of technical interest, so he may use techniques that make those features clearly evident in the photograph, without misrepresenting the appearance of the specimen. This practice provides useful guidance on presenting photographs for viewing, providing an indication of dimensions or scale, indicating the orientation of the picture, and referring to particular points on a picture. These techniques should be useful to those writing technical literature involving illustrations of the appearance of specimens. The methods of this practice should contribute materially to the accuracy and precision of other standards that rely on pictures to indicate various grades of some attribute of appearance, such as blistering or cracking. For acceptance testing, manufacturing control, and regulatory purposes, it is desirable to employ measurement, but in those cases where there are no methods of measuring the attribute of appearance of interest, well-made photographs or photomechanical reproductions of them may be the best available way to record and communicate to an inspector the nature of the attribute of appearance.1.1 This practice defines terms and symbols and provides a systematic method of describing the arrangement of lights, camera, and subject, the characteristics of the illumination, the nature of the photographic process, and the viewing system. Conditions for photographing certain common forms of specimens are recommended. Although this practice is applicable to photographic documentation in general, it is intended for use in describing the photography of specimens involved in testing and in standardizing such procedures for particular kinds of specimens. This practice is applicable to macrophotography but photomicrography is excluded from the scope of this practice. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)

ASTM E1815-06 工业用射线照相胶片系统分类的标准试验方法

1.1 This test method covers a procedure for determination of the performance of film systems used for industrial radiography. This test method establishes minimum requirements that correspond to system classes.1.2 This test method is to be used only for direct exposure-type film exposed with lead intensifying screens. The performance of films exposed with fluorescent (light-emitting) intensifying screens cannot be determined accurately by this test method.1.3 The values stated in SI units are to be regarded as standard. The values given in brackets are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Classification of Film Systems for Industrial Radiography

ASTM F1425-06 两成分显影材料摩擦电荷测定的标准试验方法

This test method measures a fundamental property of a toner and developer mix used in copiers and printers. This test method is used for quality control purposes and to determine the ability of the toner and developer materials to develop onto the photoreceptor. This test method may be used to measure the chargeto-mass ratio of new developer mixes. This test method may be used to measure the chargeto-mass ratio of developer material samples taken from a machine. This test method may be used to measure the toner concentration of new developer mixes. This test method may be used to measure the toner concentration of developer material samples taken from a machine.1.1 This test method describes a technique for measuring the tribocharge or charge-to-mass ratio of a sample of developer material.1.2 This test method determines the concentration of toner in a sample of developer material.

Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials

ANSI/AIIM MS23-2004 推荐惯例.文件的第一代缩微银胶片的生产,检验和质量保证

This document identifies and discusses the qualitative characteristics of first-generation silver gelatin microforms and the methods to attain, maintain, and measure levels of quality. The scope of this document excludes COM, updateable, color, and thermally processed microforms.

Recommended Practice - Production, Inspection, and Quality Assurance of First-Generation, Silver Microforms of Documents

KS A ISO 21550:2005 摄影.摄影图片用电子扫描器.动态范围测量

이 규격은 연속적인 톤 사진 매체를 위한 스캐너 다이내믹 레인지의 기록과 측정에 대한 방법

Photography－Electronic scanners for photographic images－Dynamic range measurements

DIN ISO 18910:2005 成像材料.照片的胶片和相纸.卷曲度测定 (ISO 18910-2000)

This International Standard specifies methods for determining and quantitatively expressing the curl characteristics of unprocessed and processed photographic film and paper in sheet, roll or strip formats. It specifies three measuring methods: method A involves the determination of curl when the specimen is held in a vertical position, methods B and C with the specimen in a horizontal position. The values for the three methods are not comparable because of the differences in specimen configuration and size. These methods are not intended for use in determining the curl characteristics of photographic materials during processing or drying.

Imaging materials - Photographic film and paper - Determination of curl (ISO 18910:2000);English version of DIN ISO 18910:2005

DIN ISO 2240:2005 摄影.照相彩色反转片.ISO感光速度的测定

This International Standard specifies the method for determining the ISO speed of colour reversal camera films producing continuous-tone pictorial images that are intended to be viewed on transparency illuminators or by projection as slides. It also applies to 8 mm and 16 mm motion-picture films used in non-professional applications. This International Standard is not applicable to professional motion-picture films regardless of their applications

Photography - Colour reversal camera films - Determination of ISO speed (ISO 2240:2003)

ISO 11142:2005 缩微照相.彩色缩微胶卷.准备线条复制原稿和连续影调原稿的曝光技术应用

This International Standard applies the exposure technique to the preparation of line originals and test charts, to their exposure on film including the necessary test originals (see Clause 5) and to the evaluation of test exposures on colour microfilm. In addition, this International Standard applies to the exposure technique and the evaluation of available continuous-tone originals, ready to be microfilmed (see Annex A). This International Standard is intended to contribute to a reproducible colour rendition with respect to the original. As far as process control is concerned, the film manufacturer's recommendation should be observed. This International Standard does not take into account the influences of projection characteristics of microfilm readers on the subjective impression of projected colour microfilms. NOTE For viewing colour microfilms, the translucent screens of microfilm readers should be neutral grey (see Annex A).

Micrographics - Colour microfilm - Application of the exposure technique to prepare line originals and continuous-tone originals

KS A ISO 18902:2005 成像材料.已加工的成像材料.相册、框架和存储材料

이 규격은 현상된 사진 필름, 감광판, 인화지를 보관하기 위해 설계된 보관 재료(enclo

Imaging materials-Processed photographic films, plates and papers-Filing enclosures and storage containers

KS A ISO 18910:2005 成像材料.摄影胶片和相纸.弯曲的测定

이 규격은 현상되지 않았거나 현상된 시트, 롤, 스트립 형태의 사진용 필름과 인화지의 컬

Imaging materials-Photographic film and paper-Determination of curl

KS A ISO 18924:2005 成像材料.阿伦尼乌斯型预测试验方法

이 규격은 이미징 재료의 물리적ㆍ화학적 변화를 예측하기 위한 시험 방법에 대하여 규정한다.

Imaging materials-Test method for Arrhenius-type predictions