G81 感光材料 标准查询与下载

HG/T 3561-2003 暗室照相拷贝片

本标准规定了暗室照相拷贝片的技术要求、试验方法、检验规则、包装及标志、贮存和运输条件。 本标准适用于以聚酯片基为支持体，在片基正面涂布明胶卤化银乳剂、背面涂布防光晕层而制成的暗室照相拷贝片。该产品用于印刷工业、印染工业拍摄文字、线条及接触加网拷贝。

Photography-copy film

HG/T 2172-2003 红激光影像记录片

本标准规定了红激光影像记录片的要求、试验方法、检验规则、包装及标志、贮存和运输条件。 本标准适用于在聚酯片基正面涂布明胶卤化银乳剂，背面涂布防光晕而制成的红激光影像记录片。 该产品用于以波长632．8nm的氦氖激光以及633nm、635nm、650nm、670nm的红激光为曝光光源的激光照排机或影像输出机进行文字处理及图像扫描。

Red laser image recording film

HG/T 2694-2003 阳图型PS版

本标准规定了阳图型PS版的技术要求、测试方法、检验规则、包装及标志、贮存和运输条件。 本标准适用于经粗化和阳极氧化处理过的、以铝板基为支持体的阳图型PS版，适用于接触曝光的真空晒版机、连晒机和自动显影机加工工艺。 本标准不适用于光学投影和直接书写制版。

Positive-acting presensitized offset plate

AIIM MS23-2004 文件的第一代缩微银胶片的生产、检验和质量保证

PRODUCTION, INSPECTION, AND QUALITY ASSURANCE OF FIRST-GENERATION, SILVER MICROFORMS OF DOCUMENTS

PRODUCTION, INSPECTION, AND QUALITY ASSURANCE OF FIRST-GENERATION, SILVER MICROFORMS OF DOCUMENTS

ASTM F2296-04 利用机械应力测定叠层胶片和印刷品间粘性的标准规程:四种不同的试验方法.划线/胶带、 交叉影线、 X切割和折皱

The image life of printed media displayed in both typical office and outdoor environments can be extended by lamination or encapsulation. While natural aging is the most reliable method of assessing lamination adhesion, the length of the time required makes this method impractical for most materials. This practice utilizing mechanical stress allows comparative studies of prints and laminating films. Factors in the office and outdoor environments, such as heat, cold, thermal shock, ultraviolet/visible radiation and water vapor can have effect on laminate stability. The resistance of the laminate to these factors can be assessed by applying mechanical stress. Good adhesion is a prime consideration for laminating films and prints. A laminating film, which does not adhere to a print or vice versa generally, has no commercial value. This practice is used to obtain comparative data of adhesion strength of encapsulated or laminated media.1.1 This practice describes procedures for assessing the adhesion between lamination films and black and white or color images produced by printers, copies and other reprographic devices.1.2 This practice can be used to test different laminates with a given set of inks and media or it can be used to evaluate inks and media with a given laminate.1.3 This practice is applicable to laminated images, where the substrate surface is subject to failure under mechanical stress from mostly peel conditions (that is, paper, film, cloth, and so forth).1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Adhesion of Lamination Films to Prints Utilizing Mechanical Stress: Four Different Test Methods-Score/Tape, Cross Hatch, X-Cut, and Crease-Folding

KS A ISO 6896:2003 电影摄影.35mm电影放映机用间歇齿轮.尺寸

이 규격은 35 mm 영화용 영사기에 있어서 16개 톱니로 이루어진 2종류의 간헐 스프

Cinematography－Intermittent sprockets for 35 mm motion－picture projectors－Dimensions

KS A ISO 491:2003 电影摄影.35mm电影胶片和涂磁胶片.剪切和穿孔尺寸

이 규격은 노출되지 않은 35 mm 영화용 필름과 자기 필름의 퍼포레이팅과 재단의 치수

Cinematography－35 mm motion－picture film and magnetic film－Cutting and perforating Dimensions

KS A ISO 6038:2003 电影摄影.70mm、65mm、35mm和16mm电影影片接头.尺寸和位置

1.1 이 규격은 70 mm, 65 mm, 35 mm 및 16 mm 영화용 필름과 자기

Cinematography－Splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion－picture films－Dimensions and locations

KS A ISO 3042:2003 电影摄影.未曝光电影胶片和涂磁胶片盒的标签.最低限度内容规定

이 규격은 영화용 생필름 또는 자기 필름 컨테이너의 표지 내용에 대한 최소한의 정보를

Cinematography－Labelling of containers for raw－stock motion－picture films and magnetic films－Minimum information specifications

KS A ISO 8622:2003 电影摄影.70mm电影涂磁发行拷贝上磁性声迹.A环还音频率响应特性

이 규격은 영사실과 영화관에서의 자기 사운드 재생에 대한 A체인의 전기적 주파수 응답

Cinematography－Magnetic sound records on 70 mm motion－picture release prints with magnetic stripes－ A－chain reproduction characteristics

KS A ISO 4243:2003 电影摄影.16mm电影发行拷贝上的画面和光学声带.位置和尺寸

1.1 이 규격은 16 mm 배급용 프린트의 이미지 및 광학 녹음의 위치와 치수에 대하

Cinematography－Picture image area and photographic sound record on 16 mm motion－picture release prints－Positions and dimensions

KS A ISO 3647:2003 电影摄影.16mm电影摄影机片盒和电影放映机片主轴.尺寸

이 규격은 16 mm 카메라와 영사기 릴 스핀들의 치수와 특성을 나타낸다.

Cinematography－Spindles for 16 mm motion－picture camera spools and projector reels－Dimensions

KS A ISO 6036:2003 电影摄影.电视用彩色电影拷贝和幻灯片.密度规范

이 규격은 35/16 mm 영화용 컬러 필름 또는 슬라이드를 텔레비전용으로 전환하는 데

Cinematography－Colour motion-picture prints and slides for television－Density specifications

KS A ISO 2404:2003 电影摄影.70mm条纹钻印刷的6音道磁性声音录音.位置和尺数

이 규격은 KS B ISO 3023에 따라 제조되어 커팅되고 퍼포레이션된 70 mm 자

Cinematography－Six－track magnetic sound records on 70 mm striped release prints－Locations and dimensions

KS A ISO 8001:2003 摄影摄影.生效所需的曝光不足的电影现象.指定方法

1.1 이 규격은 저노출 영화 필름과 푸싱(push-processing) 또는 강제 현

Cinematography－Underexposed motion－picture film requiring forced development－Designation method

KS A ISO 3023:2003 电影摄影.65mm和70mm未曝光电影胶片.裁切和打孔尺寸

이 규격은 노출되지 않은 65 mm와 70 mm 영화용 필름의 퍼포레이션과 커팅 치수를

Cinematography-65 mm and 70 mm unexposed motion-picture film-Cutting and perforating dimensions

KS A ISO 5768:2003 电影摄影.16mm.W型电影摄影机片窗在胶片上形成的画面.位置和尺寸

이 규격은 화면비가 1.66:1 또는 그 이상의 35 mm 논애너모픽 영화 필름으로 확

Cinematography－Image produced by camera aperture Type W on 16 mm motion-picture film－Position and dimensions

KS A ISO 486:2003 电影摄影.在16mm电影胶片上打普通8mm胶片片孔.裁切和打孔尺寸

이 규격은 8 mm 타입 R로 퍼포레이트된 16 mm 영화용 필름의 재단과 퍼포레이팅

Cinematography－16 mm motion－picture film perforated 8 mm Type R－Cutting and perforating dimensions

KS A ISO 3022:2003 电影摄影.打孔16mm(1-3-0)的35mm电影胶片.裁切和打孔尺寸

이 규격은 35 mm 필름을 퍼포레이팅하고 커팅할 때, 생필름의 3열 16 mm 퍼포레

Cinematography－35 mm motion－picture film perforated 16 mm(1－3－0)－Cutting and perforating dimensions

KS A ISO 8590:2003 电影摄影.70mm电影涂磁发行拷贝上磁性声迹.录音频率响应特性

이 규격은 초당 24프레임의 규정 속도로 재생할 때 70 mm 영화 상영용 자기 프린트

Cinematography－Audio records on 70 mm motion-picture release prints with magnetic stripes－Recorded characteristic