G91 化工机械与设备零部件 标准查询与下载

HG/T 21574-1994 设备吊耳

本标准规定了设备吊装用吊耳的分类、型式、代号、材料和制造技术要求。本标准适用于碳素钢、低合金钢和不锈钢制容器、塔器吊装用设备吊耳。

Equipment lugs

DIN 28086:1994 安装用设备上的吊环.尺寸和最大载荷

The document applies to reinforced eyelets on spherical heads which are mainly used for industrial processing proposes.

Eyelets on apparatuses for mounting; dimensions and maximum loadings

DIN 28087:1994 安装用仪器上的顶端提升吊耳.尺寸和最大允许载荷

This document applies to top head type lifting lugs on vessels and apparatuses mainly used in process plants.

Top head type lifting lugs on apparatuses for mounting; dimensions and allowable loadings

DIN 28085:1994 安装用设备上的吊耳.尺寸和允许负载

This document applies to lifting lugs on vessels and apparatuses.

Lifting lugs on apparatuses for mounting; dimensions and allowable loadings

DIN 28145-4:1993 搪瓷搅拌容器的焊接零件.支撑环

The document applies to tubular and support rings fitted to glass lined steel agitator vessels with outer casing according to DIN 28136 part 1.

Parts welded to glass lined agitator vessels; support rings

HG 2539-1993 钢丝绳芯难燃输送带

本标准规定了钢丝绳芯难燃输送带的产品分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于要求难燃且导静电的场所使用的钢丝绳芯输送带。

Steel wire rope core non-flammable conveyer belt

HG/T 21546.2-1993 回转圆筒用托轮

Roller for rotary cylinder

HG/T 21546.3-1993 回转圆筒用挡轮

Retaining wheel for rotary cylinder

HG/T 21546.4-1993 回转圆筒进出料箱密封装置类型与技术条件

Types and technical conditions of the sealing device for the rotary cylinder inlet and outlet bins

HG/T 21546.6-1993 回转圆筒进出料箱密封装置（JC型）与技术条件

Rotary cylinder inlet and outlet box sealing device (JC type) and technical conditions

HG/T 21546.5-1993 回转圆筒进出料箱密封装置（MG型）与技术条件

Rotary cylinder inlet and outlet box sealing device (MG type) and technical conditions

HG/T 21546.1-1993 回转圆筒用托轮、挡轮类型与技术条件

Types and technical conditions of supporting rollers and retaining rollers for rotary cylinders

HG/T 21547-1993 管道用钢制插板、垫环、8字盲板

本标准规定了管道用钢制插板、垫环、8字盲板的型式、密封面尺寸和连接尺寸以及技术要求。 本标准适合与国家标准《钢制管法兰》(GB9113～GB9122)配合使用。

Steel insert plate, backing ring, 8-word blind plate for pipeline

HG/T 2480-1993 管法兰用金属包垫片

本标准规定了管法兰用金属包垫片的型式、尺寸及技术要求。 本标准适用于公称压力PN为O.25 MPa～0.63 MPa的管法兰用金属包垫片。

Metal clad gasket for pipe flange

HG 20530-1992 钢制管法兰用焊唇密封环

Weld lip seal rings for steel pipe flanges

HG 20528-1992 衬里钢管用承插环松套钢制管法兰

Socket ring loose set steel pipe flanges for lined steel pipes

HG/T 20539-1992 增强聚丙烯（FRPP）管和管件

Reinforced Polypropylene (FRPP) Pipe and Fittings

HG 20519.10-1992 设备地脚螺栓表

Equipment anchor bolt table

HG/T 20530-1992 钢制管法兰用焊唇密封环

Welding lip sealing rings for steel pipe flanges

HG/T 20528-1992 衬里钢管用承插环松套钢制管法兰

Socket ring loose sleeve steel pipe flange for lined steel pipe