G93 化工设备 标准查询与下载

KS B 6942-2007 LNG储罐.Ni钢内罐的规格

? ??? 9 % Ni? ????(?? “????”? ??.)? ??, ??, ??, ??

Standard for Ni steel inner tank

KS B 6941-2007 LNG储罐.通用标准

? ??? LNG ????? ??, ?? ? ?? ?? ??? ???? ??? ?? ???

General standard for LNG storage tank

HG/T 3134-2007 流动床离子交换水处理设备技术条件

本标准规定了流动床离子交换水处理设备（以下简称流动床设备）的术语、分类与命名、要求、试验方法、检验规则和标志、包装、贮运。 本标准适用于设备主体以不锈钢、硬聚氯乙烯板材制作的流动床设备。

Specification of bed equipment for ion exchange water treatment

HG/T 20689-2007 化工装置基础设计深度规定

本规定适用于新建、扩建、改建的化工、石油化工厂的生产装置。独立的辅助装置、公用工程装置的基础工程设计可参照执行。

Specification on content and procedure of basic engineering design for chemical plant

HG/T 2040-2007 手动液体装卸臂通用技术条件

本标准规定了手动液体装卸臂的定义、基本参数、技术要求、试验方法、检验规则、标志、说明书、包装、运输及储存。 本标准适用于装卸液体介质的手动液体装卸臂（以下简称装卸臂）。

General technical conditions manual loading/unloading arm for liquid

HG/T 3981-2007 复极式离子膜电解槽

本标准规定了复极式离子膜电解槽的产品分类、型号标志方法、规格参数、技术要求、试验方法和检验规则。 本标准适用于氯碱工业用复极式离子膜电解槽。

Bipolar membrane cells

HG/T 3982-2007 电去离子纯水制备装置

本标准规定了电去离子纯水制备装置（以下简称EDI装置）的术语和定义、分类与型号、工作参数、要求、试验方法、检验规则、标志、包装和贮运。 本标准适用于经反渗透处理后的水（或同等水质的水）为进水，具有不同工作参数的不同类型的EDI装置。

Electrodeionization equipment for pure-water preparation

DIN 28185:2007 管式热交换器组件

Components for tubular heat exchangers

DIN 28183:2007 管式热交换器.名称

Tubular heat exchangers - Nomenclature

DIN 28182:2007 管式热交换器.管心距、管薄板的钻孔直径.挡板和支承板

Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates

DIN 28130:2007 化学设备.带搅拌装置的搅拌容器组件调查

Chemical equipment - Survey on components of agitator vessels with agitation unit

DIN EN ISO 16812:2007 石油、石化和天然气工业.管壳式热交换器

This International Standard specifies requirements and gives recommendations for the mechanical design,material selection,fabrication,inspection,testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum,petrochemical and natural gas industries. This International Standard is applicable to the following types of shell-and-tube heat exchangers:heaters,condensers,coolers and reboilers. This International Standard is not applicable to vacuum-operated steam surface condensers and feed-water heaters.

Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007); English version EN ISO 16812:2007

DIN EN 13121-4 Berichtigung 1:2007 地上用玻璃纤维增强塑料(GRP)储罐和容器.第4部分:交付、安装和维修.DIN EN 13121-4-2005技术勘误

GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance; German version EN 13121-4:2005, Corrigenda to DIN EN 13121-4:2005-03; German version EN 13121-4:2005/AC:2007

UL 1313 BULLETIN-2007 石油产品用非金属安全罐UL安全性标准.STP投票和评议提交截止日期:2007年5月21日

These requirements cover nonmetallic safety cans that have nominal capacities of 5 Imperial gallons or less and that are primarily intended to store and handle fuel oil, gasoline, kerosene. Nonmetallic safety cans that are intended to store and handle liquid fuels other than those specified above may be subjected to additional requirements not covered in the Standard. These requirements cover cans of two types, designated herein as Type I and Type II.

UL Standard for Safety Nonmetallic Safety Cans for Petroleum Products STP BALLOTS AND ALL COMMENTS DUE: MAY 21, 2007

BS EN ISO 16812:2007 石油、石化和天然气工业.壳管式热交换器

ISO 16812:2007 specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries. ISO 16812:2007 is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers, coolers and reboilers. ISO 16812:2007 is not applicable to vacuum-operated steam surface condensers and feed-water heaters.

Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers

ARMY MIL-PRF-51200 D-2007 M34A1化学剂取样工具箱

This specification covers one type of sampling kit for the collection of soil, surface,and liquid samples which may contain chemical agent contaminants.

SAMPLING KIT, CBR AGENT M34A1

KS B OIMLR 80-2006 公路和铁路运输罐

1.1 이 규격은 도로 또는 철도로 액체 제품을 운송하며 국가 계량 관리의 대상이 되는 측

Road and rail tankers

KS B OIMLR 71-2006 固定储罐.通用要求

이 규격은 대기압 또는 압력하에서 대량의 액체 저장을 위해 만들어진 고정식 저장 탱크(이하

Fixed storage tanks－General requirements

KS B OIMLR 95-2006 船舶储罐的通用要求

? ??? ?? ??? ?? ?? ??? ?? ?? ?? ??? ???? ?? ?? ?

Ship’s tank-General requirements

ANSI/UL 2208-2006 溶剂蒸馏装置(推荐日期2006-10-20)

Revised to update standard references in paragraphs 1.6 and 4.3.4.

Solvent Distillation Units (Proposals dated 10/20/06)