共找到 491 条与 橡胶、塑料用机械 相关的标准,共 33 页
Plastic mold temperature control machine
Construction machinery radial tire building machine and tire tread automatic winding machine (2016)
Engineering machinery radial tire building machine
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015); German version EN ISO 13802:2015
This European Standard specifies methods for the classification and assessment of function blocks designed to operate burners and appliances burning gaseous or liquid fuels with particular regards to their fault behaviour and preventative measures. This European Standard is applicable to control function blocks, not covered by a dedicated control standard (e. g. EN 88-1:2011, EN 88-2:2007, EN 125:2010, EN 126:2012, EN 126:2012/prA1:2014, EN 161:2011+A3:2013, EN 257:2010, EN 298:2012, EN 1106:2010, EN 1643:2014, EN 1854:2010, EN 12067-2:2004, EN 16304:2013 and EN 16340:2014, EN ISO 23553-1:2014).
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
Plastic pressure forming machine
Thermosetting plastic injection molding machine
Injection machine for all-plastic shoes
Plastic film bag making machine
本标准规定了异向双螺杆塑料挤出机的基本参数、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于加工PVC塑料制品为主的异向双螺杆塑料挤出机。
Counter-rotating twin-screw plastics extruder
Plastic extrusion turntable shoe making machine
Plastics and rubber machines - Tyre curing presses - Safety requirements; German version EN 16474:2015
This European Standard specifies the general safety, design, construction, and performance requirements and testing for safety, control or regulating devices (hereafter referred to as controls) for burners and appliances burning one or more gaseous fuels or liquid fuels. This European Standard is applicable to controls with declared maximum inlet pressure up to and including 500 kPa of nominal connection sizes up to and including DN 250. This European standard specifies general product requirements for the following controls: - automatic shut-off valves; - automatic burner control systems; - flame supervision devices; - gas/air ratio controls; - pressure regulators; - manual taps; - mechanical thermostats; - multifunctional controls; - pressure sensing devices; - valve proving systems; - automatic vent valves. This European standard applies for control functions that are not covered by a specific control standard for burners and appliances burning one or more gaseous fuels or liquid fuels. This European Standard applies also for safety accessories and pressure accessories with a product of the maximum allowable pressure PS and the volume V of less than 600000 kPa - dm 3(6000 bar- litres) or with a product of PS and DN of less than 300000 kPa (3000 bar). This European Standard applies for AC and DC supplied controls (for controls supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks controls see Annex I). This European Standard is applicable to reset functions used for reset from lockout, e. g. due to ignition failure or temperature cut-out in burners and appliances (see Annex M). This European Standard establishes methodologies for the determination of a Safety Integrity Level (SIL) and the determination of a Performance Level (PL) (see Annex J, Annex K and Annex L). This European Standard gives guidelines for environmental aspects (see Annex N). This European Standard does not apply to mechanical controls for use with liquid fuels. The protection against environmental impact in open air (i.e. capable of withstanding UV radiation, wind, rain, snow, dirt deposits, condensation, ice and hoar frost (see IEV 441-11-05:2005), earthquake and external fire) is not covered by this standard. This European Standard should be used in conjunction with the specific control standard (see Bibliography).
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements (Incorporating corrigendum February 2016)
本标准规定了轮胎均匀性检验机(以下简称检验机)的术语和定义,型号及基本参数,要求,试验,检验规则,标志、包装、运输和贮存。 本标准适用于在线检测轿车轮胎和载重汽车轮胎均匀性的检验机。
Tyre uniformity testing machine
本标准规定了轿车子午线轮胎第二段成型机(以下简称第二段成型机)的术语和定义,型号及基本参数,要求,试验,检验规则,标志、包装、运输和贮存。 本标准适用于两次法成型轿车子午线轮胎第二段成型机,也适用于两次法成型轻型载重汽车子午线轮胎第二段成型机。
Radial ply type second stage building machine
本标准规定了轮胎X射线检验机(以下简称检验机)的术语和定义,型号及基本参数,要求,试验,检验规则,标志、包装、运输和贮存。 本标准适用于使用X射线在线检测轿车轮胎、轻型载重汽车轮胎、载重汽车轮胎内部结构的检验机。
X-ray inspection machine for tyre
本标准规定了环形胎面硫化机(以下简称硫化机)的术语和定义,型号及基本参数,要求,试验,检验规则,标志、包装、运输和贮存。 本标准适用于硫化环形胎面的芯模胀缩式硫化机。
Ring tread curing press
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号