共找到 1639 条与 钢铁与铁合金分析方法 相关的标准,共 110 页
Vanadium-nitrogen—Determination of phosphorus content—Bismuth molybdenum blue spectrophotometric method
Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method
Ferrosilicon—Determination of sulfur content—Infrared absorption method and chromatographic separation-barium sulfate gravimetric method
Vanadium-nitrogen—Determination of vanadium content—Ammonium ferrous sulfate titration method
Ferroniobium—Determination of silicon content—Gravimetric method
Vanadium-nitrogen—Determination of silicon, manganese, phosphorus, aluminum content—Inductively coupled plasma atomic emission spectrometric method
GB/T 223的本部分规定了用惰性气体熔融-热导或红外法测定氢含量的方法。 本部分适用于钢铁中质量分数为0.6 μg/g~30.0 μg/g的氢含量的测定。
Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas
GB/T 223的本部分规定了用电感耦合等离子体质谱法测定钙和镁含量的方法。 本部分适用于钢铁及合金中质量分数为0.000 2%~0.003 5%的钙和0.000 3%~0.05%的镁含量的测定。
Iron, steel and alloy.Determination of calcium and magnesium.Inductively coupled plasma mass spectrometric method
本标准规定了用“接近技术”提高X射线荧光光谱分析性能的常规方法。 “接近技术”要求至少有一个与未知样品成分相近的目标样品[最好是有证标准物质/标准样品(CRM)]。 本标准适用于高合金钢中硅、锰、磷、铬、镍、钼、铜、钴、钒、钛、铌含量的测定,各元素测定范围见表1。 该标准适用于冷铸或锻造样品的分析,要求直径至少25 mm,碳含量小于0.3%(见注)。其他元素的含量应小于0.2%。 所列元素间存在基体效应。为了补偿元素间的影响,应进行数学校正。仪器厂商的软件包中一般有各种用于校正的计算机程序。
High alloy steel.Determination of multi-element contents.X-ray fluorescence spectrometry (routine method)
Stainless steel—Determination of manganse, nickel, chromium, molybdenum, copper and titanium—Handheld energy dispersive X-Ray fluorescence spectrometric method (semiquantitative method)
Stainless steel—Determination of multi-element contents—Glow discharge optical emission spectrometry
Iron and steel—Determination of antimony and tin content—Inductively coupled plasma atomic emission spectrometric method
GB/T 4702的本部分规定了用红外法测定氧含量、氢含量;用热导法测定氮含量。 本部分适用于金属铬中氧含量、氮含量、氢含量的测定。氧含量的测定范围(质量分数):0.010%~0.800%;氮含量的测定范围(质量分数):0.001%~0.070%;氢含量的测定范围(质量分数):0.001%~0.050%。
Chromium metal─Determination of oxygen, nitrogen and hydrogen content─Inert gas fusion thermal infrared detection method and conductivity method
GB/T 4702的本部分规定了采用电感耦合等离子体原子发射光谱法测定铁、铝、硅和铜含量。 本部分适用于金属铬中铁、铝、硅和铜含量的测定,各元素测定范围见表1。
Chromium metal—Determination of iron, aluminium, silicon and copper content—Inductively coupled plasma atomic emission spectrometry method
GB/T 4333的本部分规定了用波长色散X射线荧光光谱法测定硅铁中硅、锰、铝、钙、铬和铁的含量。 本部分适用于硅铁中硅、锰、铝、钙、铬和铁含量的测定。各元素测定范围见表1。
Ferrosillicon—Determination of silicon, manganese, aluminium, calcium, chromium and iron contents—Wavelength dispersive X-ray fluorescence spectrometry (Fused cast bead method)
GB/T 4702的本部分规定了采用电感耦合等离子体质谱法测定金属铬中铅、锡、铋、锑和砷含量。 本部分适用于金属铬中铅、锡、铋、锑和砷含量的测定,各元素测定范围见表1。
Chromium metal—Determination of lead,tin,bismuth,antimony and asenic content—Inductively coupled plasma mass spectrometric method
GB/T 4702的本部分规定了蒸馏分离-奈斯勒试剂分光光度法测定氮含量。 本部分适用于金属铬中氮含量的测定,测定范围(质量分数):0.002%~0.150%。
Chromium metal.Determination of nitrogen content.Distillation-nessler reagent spectrophotometric method
GB/T 4702的本部分规定了硫酸亚铁铵滴定法测定金属铬中铬含量。 本部分适用于金属铬(钒≤0.20%)中铬含量的测定,测定范围(质量分数):≥97.00%。
Chromium metal.Determination of chromium content.The ammonium ferrous sulfate titrimetric method
本标准规定了电感耦合等离子体原子发射光谱法测定镍、钴、铬、铜、磷的含量。 本标准适用于含镍生铁中镍、钴、铬、铜、磷含量的测定。测定元素的含量范围见表1。
Pig iron contenting nickel.Determination of nickel, cobalt, chromium, copper, phosphorus content.Inductively coupled plasma atomic emission spectrometry
GB/T 5687的本部分规定了蒸馏-中和滴定法测定氮化铬铁和高氮铬铁中的氮含量。 本部分适用于氮化铬铁和高氮铬铁中氮含量的测定。氮化铬铁测定范围(质量分数):2.00%~7.00%;高氮铬铁测定范围(质量分数):>7.00%~12.00%。
Nitrogen-bearing ferrochromium and nitride ferrochrome with high nitrogen content.Determination of nitrogen content.The distillation-neutralization titration method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号