H12 轻金属及其合金分析方法 标准查询与下载

YS/T 1179.4-2017 铝渣化学分析方法 第4部分：硅、镁、钙含量的测定 电感耦合等离子体发射光谱法

Methods for chemical analysis of aluminum slag Part 4: Determination of silicon, magnesium and calcium content by inductively coupled plasma optical emission spectrometry

JIS H 1322:2017 镁和镁合金. 火花放电原子发射光谱分析方法

Magnesium and magnesium alloys -- Method for spark discharge atomic emission spectrometric analysis

EN 1559-5:2017 铸造.交货技术条件.第5部分:镁合金铸件的附加要求

This part of EN 1559 specifies the additional technical delivery conditions for castings (see EN 1753) and cast anodes (see EN 12438) made from magnesium alloys. This part of EN 1559 applies to magnesium alloy castings produced in sand or permanent moulds or by pressure die casting, centrifugal casting, continuous casting or investment casting. This part of EN 1559 does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as re-melting or extrusion.

Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings

YS/T 1160-2016 工业硅粉定量相分析 二氧化硅含量的测定 X射线衍射K值法

Quantitative phase analysis of industrial silicon powder Determination of silica content X-ray diffraction K value method

YS/T 630-2016 氧化铝化学分析方法 杂质元素含量的测定 电感耦合等离子体原子发射光谱法

Chemical analysis method of alumina Determination of impurity element content Inductively coupled plasma atomic emission spectrometry

BS ISO 19950:2015 主要用于铝生产的氧化铝. α氧化铝含量的测定. 采用X射线衍射净峰面积的方法

Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas

YS/T 1035-2015 铝电解质中碳含量的测定 红外吸收光谱法

本标准规定了红外吸收光谱分析法对铝电解质中碳元素含量的测定。 本标准适用于铝电解质中碳含量的测定。测定范围：0.02%～2.00%。

Determination of carbon content in aluminum electrolyte.IR absorption spectrometry method

YS/T 473-2015 工业镓化学分析方法 杂质元素的测定 电感耦合等离子体质谱法

本标准规定了工业镓中的银、铝、铍、铋、钙、镉、钴、铬、铜、铁、锗、铟、镁、锰、钼、镍、铅、铷、锡、钛、钒、锌等杂质元素含量的测定方法。 本标准适用于工业镓(99.9%≤w(%)≤99.995%)中银、铝、铍、铋、钙、镉、钴、铬、铜、铁、锗、铟、镁、锰、钼、镍、铅、铷、锡、钛、钒、锌等杂质元素含量的测定。测定范围见表1。

Methods for chemical analysis industrial gallium.Determination of impurity elements.ICP-MS analytical method

YS/T 1036-2015 镁稀土合金光电直读发射光谱分析方法

本标准规定了镁稀土合金(WE54、WE43、GWK)中稀土元素的光电直读发射光谱分析方法。 本标准适用于镁稀土合金(WE54、WE43、GWK)中钆、钕、钇、锆4个元素的同时测定，测定范围见表1。

Test method of optical emission spectrometric analysis of magnesium rare earth alloys

YS/T 703-2014 石灰石化学分析方法 元素含量的测定 X射线荧光光谱法

本标准方法一规定了熔融石灰石中钙、镁、硅、铁、铝、钾元素含量的测定方法。本标准方法二规定了压片石灰石中钙、镁、硅元素含量的测定方法。本标准方法一适用于石灰石中元素含量的测定,测定范围(以氧化物表示)见表1。本标准方法二适用于石灰石中元素含量的测定,测定范围(以氧化物表示)见表2。

Method for chemical analysis of Limstone.Determination of element contents.X-ray fluorescence spectrometric method

BS ISO 12986-2:2014 铝生产用碳素材料.预焙阳极和阴极碳块.用四点法测定抗弯强度

Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Determination of flexural strength by the four-point method

JIS H 1632-1:2014 钛.ICP等离子发射光谱仪.第1部分:通用要求和样品分解

Titanium.ICP atomic emission spectrometry.Part 1: General requirements and sample decomposition

KS D 0229-2013 黑色金属制品的热浸铝镀金试验方法

이 표준은 철강 제품1)의 내후성, 내식성 및 내열성을 향상시킬 목적으로 실시한 용융 알루미늄 도금2)(이하 도금이라 한다.)의 시험방법에 대하여 규정한다.

Methods of test for hot dip aluminized coatings on ferrous products

KS D 0306-2013 镁及镁合金的碱性盐腐蚀试验方法

이 표준은 마그네슘 및 마그네슘합금을 알칼리성 염수에 담가 실시하는 알칼리성 염수 부식 시험방법에 대해 규정한다.

Method of alkaline salt corrosion testing for magnesium and magnesium alloys

BS EN 573-3:2013 铝和铝合金.锻制品的化学成分和形状.产品的化学成分和形状

Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products

JIS H 8687:2013 铝和铝合金阳极氧化.电强度测定

This Standard specifies the breakdown test and the withstand voltage test of sealed anodic oxidation coatings (hereafter referred to as "coatings") on aluminium and aluminium alloy products (hereafter referred to as "products").

Anodizing of aluminium and its alloys.Determination of electric strength

JIS H 8686-1:2013 铝和铝合金的阳极氧化.阳极氧化涂层影像清晰度的视觉测定.目视法

This Standard specifies a visual method for determining the image clarity of anodic oxidation coatings (hereafter referred to as "coatings") on aluminium and aluminium alloy products with flat surfaces (hereafter referred to as "products"), using a chart scale and a lightness scale, which are defined.

Anodizing of aluminium and its alloys.Visual determination of image clarity of anodic oxidation coatings.Visual method

JIS H 8680-3:2013 铝和铝合金阳极氧化.点状腐蚀评价用评级体系.第3部分:利用分光显微镜的无损测量

This Standard specifies a non-destructive method for determining the thickness of anodic oxidation coatings (hereafter referred to as the "coatings") on aluminium and aluminium alloys products (hereafter referred to as the "products") using a split-beam microscope.

Anodizing of aluminium and its alloys.Determination of thickness of anodic oxidation coatings.Part 3: Non-destructive measurement by split-beam microscope

JIS H 8685-1:2013 铝和铝合金阳极氧化.利用人造光的彩色阳极氧化涂层光照色牢度加速试验

This Standard specifies an accelerated test method for assessing the fastness, using artificial light, of coloured anodic oxidation coatings (hereafter referred to as the "coloured coatings") on products of aluminium and its alloys (hereafter referred to as the "products").

Anodizing of aluminium and its alloys.Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light

JIS H 8684:2013 铝和铝合金的阳极氧化.阳极氧化覆层变形裂纹耐性的评估

This Standard specifies a method for assessing the resistance of anodic oxidation coatings (hereafter referred to as the "coatings") on aluminium and aluminium alloy products (hereafter referred to as the "products") to cracking by deformation.

Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation