H46 钢板、钢带 标准查询与下载
共找到 2111 条与 钢板、钢带 相关的标准，共 141 页
本文件规定了建筑用彩色涂层钢板及钢带的术语和定义、分类及代号、订货内容、尺寸、外形、重量、技术要求、检验和试验、包装、标志及质量证明书。 本文件适用于厚度为0.20 mm～2.0 mm、宽度不超过1800 mm的建筑用彩涂板。 本文件不适用于采用不锈钢和铝合金板为基板的彩涂板。
Color coated steel sheets and strips for construction
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了汽车装饰用冷轧不锈钢钢板及钢带订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本文件适用于制造汽车窗体的上、下饰条、三角窗饰条、车尾饰条、迎宾饰条、车顶饰条等厚度不大于1.0mm的冷轧不锈钢钢板及钢带。
Cold-rolled stainless steel plates and strips for automotive decoration
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了钢卷轮廓检测方法的符号及说明、检测方法和评价方法。 本文件适用于厚度不大于3.0 mm冷成型用热轧钢卷、冷轧和涂镀层钢卷轮廓的检测。
Steel coil contour detection method
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了船舶及海洋工程用双相不锈钢热轧钢板的分类、代号、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本文件适用于制造远洋、沿海和内河航区航船、渔船及海洋工程结构用厚度为5 mm～60 mm的双相不锈钢钢板。
Duplex stainless steel hot rolled steel plates for shipbuilding and offshore engineering
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了热轧钢带横向板廓的表示和分区方法，同时还规定了轮廓特征缺陷的表示和判定方法。 本文件适用热轧钢带的横向板廓的特征识别、定义。 本文件对具体的板廓拟合方法不作规定，相关板廓质量问题的解决技术也不在本文件的范围之内。
Method for determining transverse profile characteristics of hot-rolled steel strip
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2022-09-30
- 实施
- 2023-04-01
本文件规定了抗湿硫化氢腐蚀钢板的术语和定义、订货内容、牌号表示方法、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本文件适用于厚度不大于250 mm的石油化工等行业制造抗湿硫化氢腐蚀设备用碳钢和低合金钢钢板。
Wet hydrogen sulfide corrosion resistant steel plate
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2022-09-30
- 实施
- 2023-04-01
Hot rolled steel strip for automobile seat belt coil spring
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2021-12-02
- 实施
- 2022-04-01
Steel plate for aluminum electrolytic cell shell
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2021-12-02
- 实施
- 2022-04-01
This document specifies the technical delivery conditions for cold rolled narrow steel strip made of non alloy and alloy steel in the form of coils and cut lengths in rolling widths less than 600 mm. Cold rolled narrow steel strip is available in grades of case hardening steel an
Cold rolled narrow steel strip for heat treatment - Technical delivery conditions; German version EN 10132:2021
- ICS
- 77.140.10
- CCS
- H46
- 发布
- 2021-11-00
- 实施
Cold rolled narrow steel strip for heat treatment. Technical delivery conditions
- ICS
- 77.140.10
- CCS
- H46
- 发布
- 2021-10-31
- 实施
- 2021-10-31
This document specifies delivery requirements applicable to the surface finish of hot-rolled plates rolled on reversing mills and wide flats, with a nominal thickness ≥3 mm and ≤400 mm.
Steel - Surface finish of hot-rolled plates and wide flats - Delivery requirements
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2021-10-00
- 实施
Test method for tensile properties of fiber reinforced polymer (FRP) bars and grids for reinforcement of concrete
- ICS
- 91.100.99
- CCS
- H46
- 发布
- 2021-05-25
- 实施
Carbon steel plates for pressure vessels for low temperature service
- ICS
- 77.140.30
- CCS
- H46
- 发布
- 2021-04-20
- 实施
Decarburized steel sheet and strip for porcelain enamelling
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2021-03-22
- 实施
Hot-rolled stainless steel plate, sheet and strip
- ICS
- 77.140.20
- CCS
- H46
- 发布
- 2021-03-22
- 实施
Cold-rolled stainless steel plate, sheet and strip
- ICS
- 77.140.20
- CCS
- H46
- 发布
- 2021-03-22
- 实施
Electrolytic zinc-coated steel sheet and strip
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2021-02-22
- 实施
1.1?This specification covers steel sheet, in coils and cut lengths, metallic-coated by the hot-dip process, with zinc-5 % aluminum alloy coating. The Zn-5Al alloy coating also contains small amounts of elements other than zinc and aluminum that are intended to improve processin
Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
- ICS
- 77.140.50
- CCS
- H46
- 发布
- 2021
- 实施
