H46 钢板、钢带 标准查询与下载

JIS G 3318:2019 预涂膜热浸镀锌. 5%铝合金镀层薄钢板和带材

Prepainted hot-dip zinc -- 5 % aluminium alloy-coated steel sheet and strip

JIS G 3323:2019 热浸镀锌-铝-镁合金涂层钢薄板和钢带

Hot-dip zinc-aluminium-magnesium alloy-coated steel sheet and strip

JIS G 4312:2019 耐热钢板,薄板和带材

Heat-resistant steel plate, sheet and strip

JIS G 3321:2019 热浸镀55%铝-锌合金钢板和钢带

Hot-dip 55 % aluminium-zinc alloy-coated steel sheet and strip

JIS G 3302:2019 热浸镀锌钢板和钢带

Hot-dip zinc-coated steel sheet and strip

JIS G 3119:2019 锅炉和压力容器用锰-钼和锰-钼-镍合金钢厚板材

Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates for boilers and pressure vessels

JIS G 3317:2019 热浸镀锌-5%铝合金钢板和钢带

Hot-dip zinc-5 % aluminium alloy-coated steel sheet and strip

JIS G 3103:2019 锅炉和压力容器用碳钢和钼合金钢厚板材

Carbon steel and molybdenum alloy steel plates for boilers and pressure vessels

T/CECS 10009-2019 波浪式无内拉筋不锈钢水箱

Wave type stainless steel tank without inner tendons

ASTM A653/A653M-19a 热浸镀锌或镀锌铁合金钢板标准规范

1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils and cut lengths. 1.2 The product is produced in various zinc or zinc-iron alloy-coating weights [masses] or coating designations as shown in Table 1 and in Table S2.1. 1.3 Product furnished under this specification shall conform to the applicable requirements of the latest issue of Specification A924/A924M, unless otherwise provided herein. 1.4 The product is available in a number of designations, grades, and classes in four general categories that are designed to be compatible with different application requirements. 1.4.1 Steels with mandatory chemical requirements and typical mechanical properties. 1.4.2 Steels with mandatory chemical requirements and mandatory mechanical properties. 1.4.3 Steels with mandatory chemical requirements and mandatory mechanical properties that are achieved through solid-solution or bake hardening. 1.5 This specification is applicable to orders in either inch-pound units (as A653) or SI units (as A653M). Values in inch-pound and SI units are not necessarily equivalent. Within the text, SI units are shown in brackets. Each system shall be used independently of the other. 1.6 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this specification. 1.7 Unless the order specifies the “M” designation (SI units), the product shall be furnished to inch-pound units. 1.8 This standard does n

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

NB/T 20007.51-2018 压水堆核电厂用不锈钢 第51部分：安全级设备用奥氏体不锈钢板

Stainless steel for use in pressurized water reactor nuclear power plants Part 51: Austenitic stainless steel plates for safety grade equipment

JIS G 3113:2018 汽车结构用热轧钢板、薄板及钢带

Hot-rolled steel plates, sheet and strip for automobile structural uses

JIS G 3134:2018 汽车用改善加工性的热轧高强度钢板材、片材和带材

Hot-rolled high strength steel plates, sheet and strip with improved formability for automobile uses

YB/T 4686-2018 镀锌锅用钢板

Steel plate for galvanized pot

YB/T 4687-2018 车轮用耐疲劳热轧钢板和钢带

Fatigue-resistant hot-rolled steel plates and strips for wheels

YB/T 4685-2018 农机刃具用热轧钢板和钢带

Hot-rolled steel plates and strips for agricultural machinery cutting tools

YB/T 4689-2018 金属热切圆锯片基体用钢

Steel for metal cutting circular saw blade base

YB/T 4688-2018 金属冷切圆锯片基体用钢

Metal cold cutting circular saw blade base steel

YB/T 4684-2018 高速列车转向架用钢板

Steel plates for high-speed train bogies

JIS G 3131:2018 热轧低碳钢板,薄板和钢带

Hot-rolled mild steel plates, sheet and strip