H46 钢板、钢带 标准查询与下载

JIS G 3131:2018 热轧低碳钢板,薄板和钢带

Hot-rolled mild steel plates, sheet and strip

IEC 60404-13:2018 磁性材料. 第13部分:电工钢片和钢带的密度、电阻率和叠层因数的测量方法

This part of IEC 60404 specifies the methods used for determining the resistivity, density and stacking factor of grain-oriented and non-oriented electrical steel strip and sheet. These quantities are necessary to establish the physical characteristics of the material. Moreover, the density is necessary to allow specified values of the magnetic polarization, resistivity and stacking factor to be determined. Since these properties are functions of temperature, the measurements will be made at an ambient temperature of (23 ±5) °C except when specified in this document.

Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet

ISO 4957:2018 工具钢

This document specifies requirements for the following grades of wrought tool steels: a) non-alloy cold-work tool steels; c) alloy hot-work tool steels; b) alloy cold-work tool steels; d) high-speed tool steels. If not stated otherwise, this document applies to all types of hot-rolled, forged, cold-drawn or coldrolled products or products produced by powder metallurgy, which are supplied in one of the surface and heat-treatment conditions given in 6.2 and Table 1. NOTE Tables 2, 4, 6 and 8 cover only those steels which have gained certain international importance, which does not mean, however, that they are available in all industrial countries. In addition, a number of other steels for tools are specified in regional, national or company standards. Where the heat resistance of the tools is of particular importance, as for example in the case of tools for hot forming glass, the material selection is based on ISO 4955.

Tool steels

YB/T 4651-2018 自动柜员机用高强度防爆钢板

High-strength explosion-proof steel plate for automatic teller machines

NB/T 20006.43-2018 压水堆核电厂用合金钢 第43部分：安全级设备用合金钢板

Alloy steel for pressurized water reactor nuclear power plants Part 43: Alloy steel plates for safety grade equipment

NB/T 20005.40-2018 压水堆核电厂用碳钢和低合金钢 第40部分：安全级设备用低合金钢板

Carbon steel and low alloy steel for pressurized water reactor nuclear power plants Part 40: Low alloy steel plates for safety grade equipment

ISO 9328-2:2018 承压用扁钢制品.技术交付条件.第2部分:具有指定升温属性的非合金钢与合金钢

This document specifies the technical delivery conditions for plates and strip for pressure equipment made of non-alloy and alloy steels as specified in Tables A.1 and B.1. The requirements and definitions

Steel flat products for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

ISO 9328-6:2018 承压用扁钢制品.技术交付条件.第6部分:淬火与回火可焊细晶粒钢

This document specifies the requirements for flat products for pressure equipment made of quenched and tempered weldable fine grain steels as specified in Tables A.1 and B.1. The requirements and definitions of ISO 9328-1 also apply to this document. NOTE 1 Fine grain steels are understood to be steels with a ferritic grain size of 6 or finer when tested in accordance with ISO 643. NOTE 2 This document offers the possibility of specifying products in accordance with European design codes and ASME-type design codes.

Steel flat products for pressure purposes - Technical delivery conditions - Part 6: Weldable fine grain steels, quenched and tempered

ISO 9328-7:2018 承压用扁钢制品.技术交付条件.第7部分:不锈钢

This document specifies requirements for flat products for pressure purposes made of stainless steels, including austenitic creep-resisting steels, in thicknesses as specified in Tables 7 to 10. The requirements and definitions of ISO 9328-1 also apply to this document.

Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels

ISO 9328-4:2018 承压用扁钢制品.技术交付条件.第4部分:具体有特定低温属性的镍合金钢

This document specifies the technical delivery conditions for plates and strip for pressure equipment made of nickel-alloy steels as specified in Tables A.1 and B.1. The requirements and definitions of ISO 9328-1 also apply to this document. NOTE This document offers the possibility of specifying products in accordance with European design codes and ASME-type design codes.

Steel flat products for pressure purposes - Technical delivery conditions - Part 4: Nickel-alloy steels with specified low temperature properties

ISO 9328-1:2018 承压用扁钢制品.技术交付条件.第1部分:一般要求

This document specifies the general technical delivery conditions for steel flat products (plate/sheet and strip) used principally for the construction of pressure equipment. The general technical delivery requirements of ISO 404 also apply to products supplied in accordance with this document.

Steel flat products for pressure purposes - Technical delivery conditions - Part 1: General requirements

ISO 9328-3:2018 承压用扁钢制品.技术交付条件.第3部分:正火可焊细晶粒结构钢

This document specifies the requirements for flat products for pressure equipment made of weldable fine grain steels as specified in Tables A.1 and B.1. The requirements and definitions of ISO 9328-1 also apply to this document. NOTE 1 Fine grain steels are understood as steels with a ferritic grain size of 6 or finer when tested in accordance with ISO 643. NOTE 2 This document offers the possibility to specifying products in accordance with European design codes and ASME-type design codes.

Steel flat products for pressure purposes - Technical delivery conditions - Part 3: Weldable fine grain steels, normalized

ISO 9328-5:2018 承压用扁钢制品.技术交付条件.第5部分:热轧制可焊细晶粒结构钢

This document specifies the requirements for flat products for pressure equipment, made of thermomechanically rolled weldable fine grain steels as specified in Tables A.1 and B.1. The steels are not suitable for hot forming. Until now, no sufficient data for the standardization of the elevated temperature properties of these steels are available. If their use at such temperatures is intended, the conditions for this are specially agreed upon between the interested parties. The requirements and definitions of ISO 9328-1 also apply to this document. NOTE 1 Fine grain steels are understood to be steels with a ferritic grain size of 6 or finer when tested in accordance with ISO 643. NOTE 2 This document offers the possibility of specifying products in accordance with European design codes and ASME-type design codes.

Steel flat products for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled

ASTM A20/A20M-18 压力容器用钢板一般要求的标准规范

1.1 This general requirements specification2 covers a group of common requirements that, unless otherwise specified in the applicable product specification, apply to rolled steel plates for pressure vessels covered by each of the following product specifications issued by ASTM: Title of Specification ASTM DesignationA Pressure Vessel Plates, Alloy Steel, Nickel A203/A203M Pressure Vessel Plates, Alloy Steel, Molybdenum A204/A204M Pressure Vessel Plates, Alloy Steel, Manganese- 8199;Vanadium-Nickel A225/A225M Stainless Chromium Steel-Clad Plate A263 Stainless Chromium-Nickel Steel-Clad Plate A264 Nickel and Nickel-Base Alloy-Clad Steel Plate A265 Pressure Vessel Plates, Carbon Steel, Low- and 8199;Intermediate-Tensile Strength A285/A285M Pressure Vessel Plates, Carbon Steel, Manganese-Silicon A299/A299M Pressure Vessel Plates, Alloy Steel, Manganese- 8199;Molybdenum and Manganese-Molybdenum-Nickel A302/A302M Pressure Vessel Plates, Alloy Steel, Double- 8199;Normalized

Standard Specification for General Requirements for Steel Plates for Pressure Vessels

ASTM A606/A606M-18 抗大气腐蚀性能提高的高强度低合金热轧和冷轧钢薄板和带材标准规范

1.1 This specification covers high-strength, low-alloy, hot- and cold-rolled sheet and strip in cut lengths or coils, intended for use in structural and miscellaneous purposes, where savings in weight or added durability are important. These steels have enhanced atmospheric corrosion resistance and are supplied in three types: Type 2 contains 0.208201;% minimum copper based on cast or heat analysis (0.188201;% minimum Cu for product check). Type 4 and Type 5 contains additional alloying elements and provides a level of corrosion resistance substantially better than that of carbon steels with or without copper addition (Note 1). When properly exposed to the atmosphere, Type 4 and Type 5 steels can be used in the bare (unpainted) condition for many applications. Note 1: For methods of establishing the atmospheric corrosion resistance of low-alloy steels, see Guide G101. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 Welding—In general, the steels listed in this specification are weldable with commonly obtained welding electrodes. When the steel is to be welded, a suitable welding procedure based on its composition should be used, taking into account intended use and service temperatures. Note 2: For a general discussion of the weldability of steel and carbon equivalents, consult Appendix X3 of A6/A6M. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

ASTM A266/A266M-18 压力容器部件用碳钢锻件标准规范

1.1 This specification2 covers four grades of carbon steel forgings for boilers, pressure vessels, and associated equipment. Note 1: Designations have been changed as follows: Current Formerly Grade 1 Class 1 Grade 2 Class 2 Grade 3 Class 3 Grade 4 Class 4 1.2 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

ASTM A830/A830M-18 按照化学成分要求提供的碳素结构质量钢板标准规格

1.1 This specification covers structural quality carbon steel plates furnished to chemical composition requirements. 1.2 The plates are available in several standard steel grades and non-standard grades. 1.3 The plates are usually furnished in the as-rolled (hot-rolled) condition. 1.4 Supplementary requirements are provided for additional requirements that may be specified on the order. 1.5 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A6/A6M for information on weldability. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

YB/T 4635-2017 汽车安全带卷簧用精密钢带

Precision steel belt for automobile seat belt coil spring

YB/T 4634-2017 连续热镀铝锌镁合金镀层钢板及钢带

Continuous hot-dip aluminum-zinc-magnesium alloy coated steel sheets and strips

ISO 20805:2017 冷轧用改进可成形性和特厚较高屈服强度的热轧薄钢板卷材

This document is applicable to continuous hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming. The steel can be treated to achieve inclusion control. It is generally used in the as-delivered condition. As a result of the combination of higher strength and improved formability, it is possible to obtain savings in mass along with better weldability. The product is intended for applications where parts are to be fabricated requiring better formability than is provided by normal high-yield-strength steel sheet. The steel sheet is produced in a number of grade designations designed to be compatible with differing application requirements. This document does not apply to — steels intended for boilers or pressure vessels, — steels designated as commercial quality, drawing quality or structural quality, — steels rolled to cold-reduced products, — steels designated as weathering steels, having increased atmospheric corrosion resistance, or — those products rolled on a plate mill.

Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming