H68 贵金属及其合金 标准查询与下载

YS/T 85-2006 光谱分析用铑基体

本标准规定了光谱分析用铑基体的要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于光谱分析纯度为99.9%～99.999%的铑时所用铑基体。

Basis rhodium as spectral analysis

YS/T 208-2006 氢气净化器用钯合金箔材

本标准规定了氢气净化用钯合金箔材的要求、规格、状态、试验方式、检验规则及标志、包装、运输、贮存。 本标准适用于氢气净化用钯合金箔材。

Palladium alloy foils for purifying hydrogen

YS/T 592-2006 电镀用氰化亚金钾

本标准规定了电镀用氰化亚金钾[KAu(CN)]的要求、试验方法、检验规则和标志、包装、运输、贮存及订货单内容。 本标准适用于电镀用氰化亚金钾。

Gold [I] potassium cyanide for electroplating

YS/T 593-2006 水合三氯化铑

本标准规定了水合三氯化铑的要求、试验方法、检验规则和标志、包装、运输、贮存及订货单内容。 本标准适用于化工催化剂、汽车尾气净化及制药行业等所用的水合三氯化铑。

Rhodium (Ⅲ) chloride hydrate

YS/T 614-2006 银钯厚膜导体浆料

本标准规定了银钯厚膜导体浆料的要求、试验方法、检验规则和标志、包装、运输、贮存及订货单内容等。 本标准适用于厚膜混电路、分立器件用银钯导体浆料（以下简称银钯浆料）。

Sliver palladium thick film conductor pasts

YS/T 598-2006 超细水合二氧化钌粉

本标准规定了超细水合二氧化钌粉(RuO•XHO)粉的要求、试验方法、检验规则、标志、包装、运输、贮存及订货单内容。 本标准适用于厚膜电阻浆料或催化剂用超细水合二氧化钌粉。

Super fine hydrous ruthenium oxide powder

KS D ISO 11427:2006 银合金首饰中含银量的测定.溴化钾容量法(电位滴定)

이 규격은 귀금속용 은 합금 중의 은의 함유량을 측정하기 위한 전위차 적정법에 대하여 규

Determination of silver in silver jewellery alloys－Volumetric (potentiometric) method using potassium bromide

KS D ISO 11426:2006 金合金首饰中含金量的测定.灰吹法(火试金法)

이 규격은 보석용 금 합금 중의 금을 분석하기 위한 회취법(시금법)에 대하여 규정한다. 합

Determination of gold in gold jewellery alloys-Cupellation method(fire assay)

GJB 5399-2005 军用贵金属接点规范

本规范规定了军用贵金属接点（铆钉及片）的要求、质量保证规定、交货准备及说明事项。 本规范适用于航天、航空及舰船电气控制用贵金属接点。

Specification for military electrical contact of noble metals

KS D 1702-2005 铂金.电感耦合等离子体原子发射光谱法测定痕量元素分析方法.活性成分补正

이 규격은 백금 지금 중에 함유된 미량 원소를 유도 결합 플라즈마 방출 분광기에 의하여 분

Platium-Determination of trace-element content by inductively coupled plasma spectrometric analysis-Matrix matching method

KS D 0058-2004 形状记忆合金合金形状变化点测定方法

이 규격은 형상 기억 합금(1)의 시차 주사 열량 측정에 의한 변태점(2) 측정 방법에

Method for determining the transformation temperature of shape memory alloys

KS D 6003-2002 白色合金

이 규격은 각종 베어링 활동부 또는 패킹 등에 사용되는 화이트 메탈 주괴(이하 주괴라 한다

White metal

ASTM B522-01(2012) 金银铂电接触合金标准规格

1.1 This specification covers 69 % gold, 25 % silver, 6 % platinum alloy tubing, rod, wire, and sheet material for sliding electrical contacts. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy

ASTM B476-01(2006) 锻制贵金属电接触材料标准规范

1.1 This specification covers general requirements common to wrought precious metal electrical contact alloy products in the form of sheet, strip, wire, and rod. Unless otherwise specified in the purchase order or in an individual specification, these general requirements shall apply to wrought electrical contact materials where indicated in the applicable product specifications issued by ASTM.1.2 In case of conflict, the requirements on the purchase order, the individual specification, and this general specification shall prevail in the sequence named.1.3 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

ASTM B476-01 锻制贵金属电接触材料标准规范

1.1 This specification covers general requirements common to wrought precious metal electrical contact alloy products in the form of sheet, strip, wire, and rod. Unless otherwise specified in the purchase order or in an individual specification, these general requirements shall apply to wrought electrical contact materials where indicated in the applicable product specifications issued by ASTM. 1.2 In case of conflict, the requirements on the purchase order, the individual specification, and this general specification shall prevail in the sequence named. 1.3 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 It is the responsibility of the user to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet for this product/material as provided by the manufacturer.

Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

ASTM B685-01(2006) 钯铜电接触材料标准规范

1.1 This specification covers a 60 % palladium-40 % copper alloy in the form of rod, wire, strip, and sheet material for electrical contacts.1.2 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Palladium-Copper Electrical Contact Material

ASTM B685-01 钯铜电接触材料标准规范

1.1 This specification covers a 60% palladium-40% copper alloy in the form of rod, wire, strip, and sheet material for electrical contacts. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 It is the responsibility of the user to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet for this product or material as provided by the manufacturer. Table 1.

Standard Specification for Palladium-Copper Electrical Contact Material

ASTM B522-01(2006) 金银铂电接触合金标准规范

1.1 This specification covers 69 % gold, 25 % silver, 6 % platinum alloy tubing, rod, wire, and sheet material for sliding electrical contacts.1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy

ASTM B522-01 金银铂电接触合金标准规范

1.1 This specification covers 69% gold, 25% silver, 6% platinum alloy tubing, rod, wire, and sheet material for sliding electrical contacts. 1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units may be approximate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.4 It is the responsibility of the user to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet for this product/material as provided by the manufacturer.

Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy

ASTM B541-01(2006) 电接触用金合金标准规范

1.1 This specification covers a gold-rich, age-hardenable alloy in rod, wire, and strip form applicable to electrical contacts.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.The following precautionary statement pertains to the test method portion only, Section , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

Standard Specification for Gold Electrical Contact Alloy