J31 铸造 标准查询与下载
共找到 1159 条与 铸造 相关的标准，共 78 页
Steel castings. General technical delivery requirements
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Cast steels and alloys with special physical properties
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-09-30
- 实施
- 2015-09-30
This International Standard specifies chemical composition and mechanical properties of cast steels and alloys for heat-resistant service.
Heat-resistant cast steels and alloys for general applications
- ICS
- 77.140.20;77.140.80
- CCS
- J31
- 发布
- 2015-09
- 实施
Corrosion-resistant cast steels for general applications
- ICS
- 77.140.20;77.140.80
- CCS
- J31
- 发布
- 2015-09
- 实施
Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings; German version EN 1559-4:2015
- ICS
- 77.150.10
- CCS
- J31
- 发布
- 2015-05
- 实施
Founding - Technical conditions of delivery - Part 4 : additional requirements for aluminium alloy castings
- ICS
- 77.150.10
- CCS
- J31
- 发布
- 2015-04-18
- 实施
- 2015-04-18
Steel castings - Steel castings for general engineering uses; German version EN 10293:2015
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-04
- 实施
Founding. Liquid penetrant testing. Investment castings
- ICS
- 77.040.20;77.140.80;77.150.99
- CCS
- J31
- 发布
- 2015-02-28
- 实施
- 2015-02-28
Founding. Technical conditions of delivery. Additional requirements for aluminium alloy castings
- ICS
- 77.150.10
- CCS
- J31
- 发布
- 2015-02-28
- 实施
- 2015-02-28
Steel castings. Steel castings for general engineering uses
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-01-31
- 实施
- 2015-01-31
1.1 This specification covers carbon and alloy steel castings for pressure-containing and other applications intended primarily for petroleum and gas pipelines in areas subject to low-ambient temperatures. Castings shall be heat treated by normalizing and tempering or liquid quenching and tempering. All classes are weldable under proper conditions. Hardenability of some grades may limit usable section size. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Unless the order specifies an “M” designation, the material shall be furnished to inch-pound units. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015
- 实施
Castings — System of dimensional tolerances and machining allowances
- ICS
- 17.040.10
- CCS
- J31
- 发布
- 2014-12-29
- 实施
- 2014/12/29
Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes (ISO 8405:2013)
- ICS
- 25.120.30
- CCS
- J31
- 发布
- 2014-12
- 实施
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings; German version EN 1559-2:2014
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2014-12
- 实施
Founding. Technical conditions of delivery. Additional requirements for steel castings
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2014-10-31
- 实施
- 2014-10-31
Steel castings -- General technical delivery requirements
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2014-10-20
- 实施
本部分规定了压水堆核电厂用3级耐海水腐蚀奥氏体-铁素体双相不锈钢承压铸件的制造、化学成分、力学性能、试验方法、无损检测等技术要求。本部分适用于压水堆核电厂用3级耐海水腐蚀奥氏体-铁素体双相不锈钢承压铸件，包括ZG03Cr22Ni6Mo3N、ZG04Cr26Ni5Cu3Mo2N、ZG03Cr25Ni7Mo5N和ZG03Cr25Ni8Mo4CuWN。
Stainless steel for pressurized water reactor nuclear power plants.Part 28: Class 3 pressure-retaining austenitic-ferritic (duplex) stainless steel castings for seawater application
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2014-10-15
- 实施
- 2015-03-01
本部分规定了压水堆核电厂泵用奥氏体-铁素体双相不锈钢A、B、C类非承压铸件的制造、化学成分、力学性能、试验方法和无损检测等技术要求。本部分适用于压水堆核电厂泵用奥氏体-铁素体双相不锈钢A(包括Al和A2)、B(包括B1和B2)和C类非承压铸件。
Stainless steel for pressurized water reactor nuclear power plants.Part 29: non-pressure-retaining category A, B and C austenitic-ferritic duplex stainless steel castings for pumps
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2014-10-15
- 实施
- 2015-03-01
Specimens and methods for tensile testing of cast aluminum and its alloys
- ICS
- 77.120.10
- CCS
- J31
- 发布
- 2014-09-13
- 实施
- 2014-10-13
Specimens and methods for impact testing of cast aluminum and its alloys
- ICS
- 77.120.10
- CCS
- J31
- 发布
- 2014-09-13
- 实施
- 2014-10-13
