J43 磨料与磨具 标准查询与下载
共找到 1108 条与 磨料与磨具 相关的标准，共 74 页
Bonded Abrasives Fiber Reinforced Resin Cutting Wheel
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2016-10-22
- 实施
- 2017-04-01
Safety requirements for superabrasive products; German version EN 13236:2010+A1:2015
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2016-05
- 实施
Precision superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2016-04-23
- 实施
- 2016-04-23
Non-metallic blast-cleaning abrasives
- ICS
- 25.100.70;25.220.10
- CCS
- J43
- 发布
- 2016-03-22
- 实施
Precision superabrasives. Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2016-02-29
- 实施
- 2016-02-29
Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2016-02-29
- 实施
- 2016-02-29
This International Standard specifies dimensions for mounting and fixing bores in blanks. These mounting and fixing bores comply with the relevant dimensions of the clamping flanges specified in ISO 21537-2.
Blanks for superabrasive cutting-off wheels - Mounting and fixing bores - Building construction and civil engineering
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2016-02-01
- 实施
Precision superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2016-02
- 实施
Bonded abrasive products -- General requirements
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-12-21
- 实施
This European Standard only applies to superabrasives products containing natural or synthetic diamond or cBN (cubic boron Nitride). It includes precision grinding and cutting-off wheels, non-precision cutting-off wheels, diamond wires, mounted points and other superabrasive products for non-precision grinding. It also applies to reconditioned superabrasive cutting-off wheels. This European Standard specifies requirements and/or measures for the removal or reduction of hazards resulting from the design and application of the superabrasive products. This European Standard contains also procedures and tests for verification of the compliance with the requirements as well as safety information for use which is to be made available to the user by the manufacturer. The hazards taken into consideration are listed in Clause 4. This European Standard does not apply to bonded abrasive products, coated abrasive products, rotating dressing tools, truers nor any non-rotating superabrasive products.
Safety requirements for superabrasive products
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-12
- 实施
Dieser Teil der ISO/TS 80004 führt Begriffe und deren Definitionen auf, die mit Kernbegriffen auf dem Gebiet der Nanotechnologie verbunden sind. Ziel ist die Erleichterung der Kommunikationen zwischen Organisationen und Einzelpersonen in der Industrie und denjenigen, die mit ihnen zusammenarbeiten.
Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015)
- ICS
- 01.040.07;07.030
- CCS
- J43
- 发布
- 2015-12
- 实施
Abrasive products - Checking the grain size of superabrasives (ISO 6106:2013)
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-11
- 实施
本标准规定了爆轰法多晶金刚石微粉的标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于爆轰法合成的多晶金刚石微粉。
Superabrasive.Detonation polycrystalline diamond powders
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了树脂和橡胶薄片砂轮的形状及代号、基本尺寸、标记、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于树脂和橡胶结合剂制造的切割、开槽、磨转子槽等用途的薄片砂轮(以下简称砂轮)，不适用于纤维增强树脂、纤维增强橡胶结合剂切割砂轮。
Bonded abrasive products.Resinoid and rubber bond flat grinding wheel
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了固结磨具检验用术语和定义、检验依据、不合格分类及项目、出厂检验、监督性检验和委托检验。 本标准适用于陶瓷结合剂、树脂结合剂、橡胶结合剂、菱苦土结合剂和塑料结合剂固结磨具。 对于有单列产品标准的固结磨具，其产品标准中对不合格分类和出厂检验另有规定的按其规定进行检验。
Bonded abrasive products.Inspection rules
- ICS
- 25.100.70
- CCS
- J43
- 发布
- 2015-10-10
- 实施
- 2016-03-01
