手工工具标准-分析测试百科网

QB/T 5231-2018 安全锤

本标准规定了安全锤的产品分类、要求、试验方法、检验规则和包装、标志、运输与贮存。本标准适用于车辆发生紧急事故或灾害时，用于以击碎玻璃、割断安全带等方式进行辅助逃生的手持式安全锤。

Safety hammer

ICS: 25140.30
CCS: J47
发布: 2018-05-08
实施: 2018-09-01

ISO 3315:2018 螺钉和螺母用装配工具.手动方榫传动套筒扳手传动件.尺寸规格和试验

This document is applicable to driving parts of hand-operated square drive socket wrenches. NOTE The driving parts covered by this document are the ones identified in ISO 1703:2018 under reference No. 6100010 and 6100011, 6100030, 6100040, 6100050 and 6100051, 6100060 and 6100061, 6100090 as well as 6100100 and 6100101. It specifies: a) the overall dimensions; c) the method of torque testing; e) the designation; b) the minimum Rockwell hardness value for their driving squares; d) the minimum torsional strength values; f) the marking.

Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests

ICS: 25.140.30
CCS: J47
发布: 2018-05-01
实施

BS ISO 6787:2018 螺钉和螺母的装配工具活动扳手

Assembly tools for screws and nuts. Adjustable wrenches

ICS: 25.140.30
CCS: J47
发布: 2018-04-13
实施: 2018-04-13

BS ISO 10103:2018 螺钉和螺母的装配工具双头套筒扳手平头和偏置外形尺寸和测试扭矩

Assembly tools for screws and nuts. Doubled-headed box wrenches, flat and offset. Outside dimensions and test torques

ICS: 25.140.30
CCS: J47
发布: 2018-03-27
实施: 2018-03-27

JIS B 1015:2018 螺栓和螺钉用内板拧的六角花形

Hexalobular internal driving feature for bolts and screws

ICS: 21.060.10
CCS: J47
发布: 2018-03-20
实施

ISO 10104:2018 螺钉和螺母用装配工具.双头高颈和矮颈梅花扳手.外部尺寸

This document specifies the overall length and the maximum head thickness for double-headed box wrenches, deep offset (Form B) and modified offset (Form A). NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1102060 and 1102050. This document does not cover technical specifications for these products. Technical specifications are given in ISO 1711-1:2016, series A.

Assembly tools for screws and nuts - Double-headed box wrenches, deep offset and modified offset - Outside dimensions

ICS: 25.140.30
CCS: J47
发布: 2018-03-01
实施

ISO 10103:2018 螺钉和螺母用装配工具.双头直颈和弯颈梅花扳手.外部尺寸和试验扭矩

This document specifies the overall length and the maximum head thickness for double-headed box wrenches, flat (Form B) and offset (Form A). NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1102030 and 1102040. This document covers technical specifications for the test torque of these products. All other technical specifications are given in ISO 1711-1.

Assembly tools for screws and nuts - Doubled-headed box wrenches, flat and offset - Outside dimensions and test torques

ICS: 25.140.30
CCS: J47
发布: 2018-03-01
实施

ISO 6787:2018 螺钉和螺母用装配工具.活扳手

This document specifies the dimensions of adjustable wrenches and the admissible clearance of the adjustable jaw. It also specifies test conditions to test the suitability of tool performance. NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference number 1101040.

Assembly tools for screws and nuts - Adjustable wrenches

ICS: 25.140.30
CCS: J47
发布: 2018-03-01
实施

ISO 1703:2018 螺钉和螺母用装配工具.术语

This document gives a nomenclature in English of assembly tools for screws and nuts. NOTE Annex A provides the technically equivalent terms in French, one of the other official ISO languages. In addition, this document gives the equivalent terms in German, Italian, Spanish and Swedish (see Annex B). These terms are published under the responsibility of the member bodies for Germany (DIN), Italy (UNI), Spain (UNE) and Sweden (SIS) and are given for information only. However, only the English and French terms can be considered as ISO terms.

Assembly tools for screws and nuts - Nomenclature

ICS: 01.040.25;25.140.01
CCS: J47
发布: 2018-02-01
实施

DIN ISO 3317:2017 螺钉和螺母用装配工具.机动套筒扳手用带六角形或圆柱平传动的方形传动接头(ISO 3317-2015)

This document prescribes the technical specifications for square drive adaptor hexagon or cylindrical flat inserts for power socket wrenches. It applies to square drive adaptor with hexagon drive or with cylindrical flat end drive as defined in ISO 1173, and to driving squares for power socket wrenches as defined in ISO 1174-2.

Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches (ISO 3317:2015)