J50 机床综合 标准查询与下载



共找到 840 条与 机床综合 相关的标准,共 56

Green Design Product Evaluation Technical Specification CNC Machine Tools

ICS
25.080
CCS
J50
发布
2023-09-28
实施
2023-12-28

This standard specifies the technical safety requirements and protective measures to be observed by persons entrusted with the design, manufacture and supply of presses, especially mechanical presses. The safety requirements described in this standard apply exclusively to mechani

Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019); German version EN ISO 16092-2:2020

ICS
25.080.01
CCS
J50
发布
2021-04-00
实施

Steel and heat treatment for machine tool parts

ICS
25.080.01
CCS
J50
发布
2021-03-05
实施
2021-07-01

Machine tool lubrication requirements statement

ICS
25.080.01
CCS
J50
发布
2021-03-05
实施
2021-07-01

Telescopic machine tool guide rail protective cover

ICS
25.080.01
CCS
J50
发布
2021-03-05
实施
2021-07-01

Machine tools -- Environmental evaluation of machine tools -- Part 2: Methods for measuring energy supplied to machine tools and machine tool components

ICS
25.080.01
CCS
J50
发布
2021-02-22
实施

Le présent document définit quatre essais:l'essai d'erreur de variation de température ambiante (ETVE) ;l'essai pour la déformation thermique due à une broche en rotation;l'essai pour la déformation thermique due au déplacement le long d'axes linéaires;l'essai pour la déformation

Test code for machine tools - Part 3 : determination of thermal effects

ICS
25.080.01
CCS
J50
发布
2021-01-23
实施
2021-01-23

This document, in addition to ISO 16092-1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of pneumatic presses which are intended to work cold metal or material partly of cold metal. This document d

Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019); German and English version EN ISO 16092-4:2020

ICS
25.080.01
CCS
J50
发布
2020-12-00
实施

Test code for machine tools. Determination of thermal effects

ICS
25.080.01
CCS
J50
发布
2020-11-20
实施
2020-11-20

本标准规定了机床装备制造成熟度等级的划分、要素、基本条件及评价规范。 本标准适用于机床装备制造企业、机床装备用户或第三方对各类批量生产的机床装备评价。

Maturity evaluation specification for machine tool equipment manufacturing

ICS
03.120.10
CCS
J50
发布
2020-11-18
实施
2020-12-01

This document defines four tests: — an environmental temperature variation error (ETVE) test; — a test for thermal distortion caused by rotating spindles; — a test for thermal distortion caused by moving linear axes; — a test for thermal distortion caused by rotary motion of components. The tests for thermal distortion caused by moving linear axes (see Clause 7) are applicable to numerically controlled (NC) machines only and are designed to quantify the effects of thermal expansion and contraction as well as the angular deformation of structures. For practical reasons, the test methods described in Clause 7 apply to machines with linear axes up to 2000 mm in length. If they are used for machines with axes longer than 2000 mm, a representative length of 2000 mm in the normal range of each axis is chosen for the tests. The tests correspond to the drift test procedure as described in ISO/TR 16015:2003, A.4.2, applied for machine tools with special consideration of thermal distortion of moving linear components and thermal distortion of moving rotary components. On machine tools equipped with compensation for thermal effects these tests demonstrate any uncertainty in nominal thermal expansion due to uncertainty of coefficient of thermal expansion and any uncertainty of length due to temperature measurement.

Test code for machine tools - Part 3: Determination of thermal effects

ICS
25.080.01
CCS
J50
发布
2020-11-00
实施

Machining center performance test method

ICS
25.080.01
CCS
J50
发布
2020-04-16
实施
2021-01-01

本标准规定了水基金属清洗剂的技术要求、试验方法、检验等内容。 本标准适用于主要由表面活性剂和多种添加剂组成的清洗金属材料和零部件油污的水基金属清洗剂制造与检验。

Test methods of water-based metal cleanser

ICS
25.060.01
CCS
J50
发布
2020-01-01
实施
2020-01-01

Heavy machine tool product classification

ICS
25.080.01
CCS
J50
发布
2019-05-02
实施
2020-01-01

High-speed tool holder and machine tool spindle interface Part 1: Technical specifications for hollow cone (HSK) interface with flange contact surface

ICS
25.080.10
CCS
J50
发布
2019-05-02
实施
2020-01-01

High-speed tool holder and machine tool spindle interface Part 2: Technical specification for non-rotating tool spindle interface with hollow cone (HSK) with flange contact surface

ICS
25.080.10
CCS
J50
发布
2019-05-02
实施
2020-01-01

Test conditions for numerically controlled turning machines and turning centres -- Part 5: Accuracy of speeds and interpolations

ICS
25.040.20
CCS
J50
发布
2019-03-20
实施

Test conditions for machining centres -- Part 7: Accuracy of finished test pieces

ICS
25.040.10
CCS
J50
发布
2018-08-20
实施

Test conditions for machining centres -- Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)

ICS
25.040.10
CCS
J50
发布
2018-08-20
实施

Machining centres -- Test conditions -- Part 6: Accuracy of speeds and interpolations

ICS
25.040.10
CCS
J50
发布
2018-08-20
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号