特种加工机床标准-分析测试百科网

JB/T 4105-1999 电火花成形机.技术条件

　　本标准规定了电火花成形机的安全防护、加工和装配质量、机床空运转试验、机床精度检验、机床负荷试验、标志与使用说明书和包装、运输与贮存的技术要求。　　本标准适用于一般用途、常规精度的模具及零件加工用电火花成形机。

Die sinking electro-discharge machines.Technical requirements

ICS: 25.080.99
CCS: J59
发布: 1999-10-08
实施: 2000-03-01

JB/T 54453-1999 立式电解成形机产品质量分等（内部使用）

Vertical electrolytic forming machine product quality classification (internal use)

ICS
CCS: J59
发布: 1999-06-09
实施: 2000-01-01

JB/T 54454-1999 数控低速走丝电火花线切割机产品质量分等（内部使用）

Product quality classification of CNC low-speed wire EDM machine (internal use)

ICS
CCS: J59
发布: 1999-06-09
实施: 2000-01-01

BS ISO 11090-2:1998 机床.放电加工刻模机的试验条件.术语和精度试验.双柱架式凿岩机(移动头型和纵横移动工作台型)

To be read in conjunction with BS ISO 230-1:1996, BS ISO 230-2:1997

Machine tools - Test conditions for die sinking electrodischarge machines (EDM) - Terminology and testing of accuracy - Two column machines (slide-head type and cross-slide table type)

ICS: 01.040.25;25.120.40
CCS: J59
发布: 1998-12-15
实施: 1998-12-15

ISO 11090-2:1998 机床电腐蚀加工机床(EDM)检验条件术语和精度检验第2部分:双柱式机床(移动主轴头型和十字移动工作台型)

This part of ISO 11090 specifies, with reference to ISO 230-1 and ISO 230-2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for general purpose and normal accuracy die sinking electro-discharge machines (EDM). It also specifies the applicable tolerances, corresponding to the above-mentioned tests. This part of ISO 11090 is applicable to two column machines of slide-head type and cross-slide table type. This part of ISO 11090 deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of the accuracy. This part of ISO 11090 provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841. NOTE — In addition to the terms used in the three official ISO languages (English, French and Russian), annex A of this part of ISO 11090 gives, for information, the equivalent terms in the Dutch, German, Italian and Swedish languages; these are published under the responsibility of the national member bodies for Belgium (IBN), Germany (DIN), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms.

Machine tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 2: Two column machines (slide-head type and cross-slide table type)

ICS: 01.040.25;25.120.40
CCS: J59
发布: 1998-10
实施

JB/T 7445.2-1998 特种加工机床.型号编制方法

本标准规定了特种加工机床的类、组、系代号及机床型号和名称的表示方法。本标准适用于各类特种加工机床。

Non-traditional machines Method for designing types

ICS: 25.080.99
CCS: J59
发布: 1998-07-17
实施: 1998-12-01

BS ISO 11090-1:1998 机床.放电加工刻模机的试验条件.术语和精度试验.第1部分:单柱架式凿岩机(纵横移动型工作台和固定型工作台)

To be read in conjunction with BS ISO 230-1:1996, BS ISO 230-2:1997

Machine tools - Test conditions for die sinking electrodischarge machines (EDM) - Terminology and testing of accuracy - Single column machines (cross slide table type and fixed table type)

ICS: 01.040.25;25.120.40
CCS: J59
发布: 1998-05-15
实施: 1998-05-15

ISO 11090-1:1998 机床电腐蚀加工机床(EDM)检验条件术语和精度检验第1部分:单柱式机床(十字型工作台和固定型工作台)

This part of ISO 11090 specifies, with reference to ISO 230-1 and ISO 230-2, geometric and machining tests and tests for checking accuracy and repeatability of numerically controlled positioning axes for general purpose and normal accuracy die sinking electro-discharge machines (EDM). It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 11090 is applicable to single column machines of cross slide table type and fixed table type. This part of ISO 11090 deals only with the verification of the accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of accuracy. This part of ISO 11090 provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841. NOTE — In addition to the terms used in the three official ISO languages (English, French and Russian), annex A of this part of ISO 11090 gives the equivalent terms in the Dutch, German, Italian and Swedish languages; these are published under the responsibility of the National member bodies for Belgium (IBN), Germany (DIN), Italy (UNI) and Sweden (SIS). However, only the terms given in the official languages can be considered as ISO terms.

Machine tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1: Single column machines (cross slide table type and fixed table type)

ICS: 01.040.25;25.120.40
CCS: J59
发布: 1998-03
实施