J70 通用机械与设备综合 标准查询与下载

DLA MS9488 REV A-1969 AMS 5731型0.164-36 UNJF-3A六边整杆螺杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

SCREW, MACHINE-HEXAGON HEAD, FULL SHANK, AMS 5731, .164-36 UNJF-3A

DLA MS9487 REV A-1969 AMS 5731型136-40 UNJF-3A六边整杆螺杆机

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, AMS 5731, 136-40 UNJF-3A

AIR FORCE MS9224 REV A-1963 5625-18AMS5735型12点头部耐热锚杆机

SHANK SHALL BE STRAIGHT WITHIN .O02 FIR. PER INCH OF BOLT LENGTH. (21-THE CONCENTRICITY OF THREAD PD IN RELATION TO THE SHANK SHALL BE WITHIN .O06 FIR. i31 THE CONCENTRICITY OF THE SHANK IN RELATION TO THE WASHER FACE DIAMETER AND 12 POINT OD SHALL BE

BOLT-MACHINE, 12 POINT HEAD HEAT RESISTANT, .5625-18 AMS 5735

DLA MS9443-1962 AMS 6304型钢锚杆机的0.375-24 UNJF-3A型六边钻头镍镉电镀螺杆

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED .375-24 UNJF-3A

DLA MS9446-1962 AMS 6304型钢锚杆机的0.5625-18 UNJF-3A型六边钻头镍镉电镀螺杆

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE - STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .5625-18 UNJF-3A

DLA MS9448-1962 AMS 6304型钢锚杆机的0.750-16 UNJF-3A型六边钻头镍镉电镀螺杆

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE - STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .750-16 UNJF-3A

DLA MS9445-1962 AMS 6304型钢锚杆机的0.500-20 UNJF-3A型六边钻头镍镉电镀螺杆

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE - STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .500-20 UNJF-3A

DLA MS9447-1962 AMS 6304型钢锚杆机的0.625-18 UNJF-3A型六边钻头镍镉电镀螺杆

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

BOLT, MACHINE-STEEL, AMS 6304, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, .625-18 UNJF-3A

DB31/T 548-1992 热风干燥设备干燥效能的评定方法

Evaluation method of drying efficiency of hot air drying equipment

SJ/T 31057-1994 表面喷漆生产线完好要求和检查评定方法

本标准规定了油漆生产线的完好要求和检查、评定方法。 本标准适用于悬挂式油漆生产线，其它类型的油漆生产线亦可参照本标准执行。

Integrity requirements and inspection and assessment methods for surface painting production lines

SJ/T 31058-1994 静电喷塑生产线完好要求和检查评定方法

本标准规定了静电喷塑生产线的完好要求和检查、评定方法。 本标准适用于悬挂式静电喷塑生产线，其它类型的静电喷塑生产线亦可参照本标准执行。

Integrity requirements and inspection and evaluation methods of electrostatic spray plastic production line