共找到 4321 条与 电缆及其附件 相关的标准,共 289 页
本标准规定的试验条件和试验参数适用于电缆、电线和软线的最常用类型的绝缘和护套材料。
Common test methods for insulating and sheathing materials of electric cables. Part 3: Methods specific to PVC compounds. Section two: Loss of mass test--Thermal stability test
本标准规定的试验条件和试验参数适用于电缆,电线和软线的最常用类型的绝缘和护套材料。
Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section three: Methods for determining the density--Water absorption tests--Shrinkage test
本标准规定的试验条件和试验参数适用于电缆、电线和软线的最常见类型的绝缘和护套材料。
Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
本标准规定的试验条件和试验参数适用于通信电缆中的填充膏材料。
Common test methods for insulating and sheathing materials of electric cables. Part 5: Methods specific to filling compounds. Section one: Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive components--
本标准规定的试验条件和试验参数适用于电缆、电线和软线的最常用类型的绝缘和护套材料。
Common test methods for insulating and sheathing materials of electric cables. Part 2: Methods specific to elastomeric compounds. Section one: Ozone resistance test--Hot set test--Mineral oil immersion test
本标准规定的试验条件和试验参数适用于电缆、电线和软线的最常用类型的绝缘和护套材料。
Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application. Section one: Measurement of thickness and overall dimensions--Tests for determining the mechanical properties
GB 5013第5部分详述了额定电压300/500V橡皮绝缘电梯电缆的技术要求。每种电缆均应符合GB5013.1规定的相应要求和本部分的特殊要求。
Rubber insulated cables of rated voltages up to and including 450/750V. Part 5: Lift cables
GB 5013第4部分详述了额定电压450/750V及以下橡皮绝缘编织软线和橡皮绝缘橡皮或氯丁或其他相当的合成弹性体护套软线和软电缆的产品技术要求。 所有电缆应符合GB5013.1规定的相应要求,并且每种型号电缆应各自符合本部分的特殊要求。
Rubber insulated cables of rated voltages up to and including 450/750V. Part 4: Cords and flexible cables
GB 5013第2部分给出了GB5013的所有部分规定的、而没有包括在GB/T2951中的试验方法。
Rubber insulated cables of rated voltages up to and including 450/750V. Part 2: Test methods
GB 5013第1部分适用于额定电压U0/U为450/750V及以下硫化橡皮绝缘和护套(如果有的话)的硬和软电缆,用于交流额定电压不超过450/750V的动力装置。 注:对某些型号的软电缆可使用术语“软线”。 各种型号的电缆在GB 5013.3、GB 5013.4等标准中规定,电缆的型号表示法见附录A。 第1~第7部分规定的试验方法见GB 5013.2、GB 12666.2及GB/T 2951的相关部分。
Rubber insulated cables of rated voltages up to and including 450/750V. Part 1: General requirements
GB 5013第6部分详述了橡皮绝缘电焊机电缆的技术要求。每种电缆均应符合GB5013.1规定的相应要求和本部分的特殊要求。
Rubber insulated cables of rated voltages up to and including 450/750V. Part 6: Arc welding cables
GB 5013第7部分详述了额定电压450/750V及以下乙烯-乙酸乙烯酯橡皮绝缘电缆的技术要求。 每种电缆均应符合GB 5013.1规定的要求和本部分的特殊要求。
Rubber insulated cables of rated voltages up to and including 450/750V. Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
本标准的第4部分详细规定额定电压300/500V轻型聚氯乙烯护套电缆的技术要求。 所有电缆均应符合GB 5023.1规定的相应要求和本部分的特殊要求。
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 4: Sheathed cables for fixed wiring
本标准的第5部分详细规定额定电压300/500V及以下聚氯乙烯软电缆(软线)的技术要求。 所有电缆均应符合GB5023.1规定的相应要求,并且各种型号电缆应分别符合本部分规定的特殊要求。
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 5: Flexible cables (cords)
本标准的第6部分详细规定额定电压450/750V及以下电梯电缆和挠性连接用电缆的技术要求。 每种电缆均4应符合GB5023.1的相应要求和本部分的特殊要求。
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 6: lift cables and cables for flexible connection
本标准的第1部分适用于额定电压U0/U为450/750V及以下聚氯乙烯绝缘和护套(若有)的硬和软电缆,使用在交流标称电压不超过450/750V的动力装置。 注:对某些型号的软电缆,可使用术语“软线”。 各种型号的电缆规定在GB 5023.3、GB 5023.4等标准中,电缆的型号表示方法见附录A。 在第1、3、4等部分中规定的试验方法见GB 5023.2、GB/T 12666.2及GB/T 2951的相关部分。
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 1: General requirements
在GB 5023各部分中所规定的试验方法均列于本部分和下列标准: GB/T 2951-1997 电缆绝缘和护套材料通用试验方法 GB/T 12666.2-90 电线电缆燃烧试验方法 第2部分:单根电线电缆垂直燃烧试验方法
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 2: Test methods
本标准的第7部分详细规定额定电压300/500V及以下聚氯乙烯绝缘屏蔽和非屏蔽绝缘控制电缆的技术要求。 所有电缆均应符合GB 5023.1规定的相应要求,并且各种型号电缆应分别符合本部分规定的特殊要求。
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 7: Flexible cables screened and unscreened with two or more conductors
本标准的第3部分详细规定额定电压450/750V及以下固定布线用聚氯乙烯绝缘单芯无护套电缆的技术要求。 所有电缆均应符合GB 5023.1规定的相应要求,并且各种型号电缆应分别符合本部分规定的特殊要求。
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V. Part 3: Non-sheathed cables for fixed wiring
本标准规定了220级聚酰亚胺漆包铜扁线品种、规格、技术要求及检验。 本标准适用于220级聚酰亚胺漆包铜扁线,简称聚酰亚胺漆包铜扁线。 本标准应与GB/T7095.1一起使用。
Enamelled rectangular wires. Part 5--Polyimide enamelled rectangular copper wires, class 220
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号