K70 电气照明综合 标准查询与下载

DIN V VDE V 0108-100:2010 紧急疏散照明系统

This prestandard specifies the provision of illumination of escape routes and safety signs in the event of failure of the normal supply, and specifies the minimum provision of such emergency lighting based on the size, type and usage of the premises. This prestandard relates to the provision of electric emergency escape lighting in all work places and premises open to the public. This prestandard presents the possible further development of EN 50172:2004 as desired by Germany. This prestandard can be a basis for contracting parties.

Emergency escape lighting systems

BS EN 61231:2010 电灯国际编码系统(ILCOS)

This International Standard gives the rules for the international lamp coding system and covers all lamp categories, excluding vehicle lamps. Coding for the main lamp types is specified and, for the others, will follow by amendments to this standard as appropriate. The object of the international lamp coding system is – to improve communication about the different types of lamps; – to help in discussions concerning interchangeability and compatibility of products; – to create a closer relationship between international standards and manufacturers’ literature (for example the code could be given in future in the relevant parts of a standard); – to enable correct replacements of lamps; – to be used as a complementary marking on the luminaire; – to replace national and regional coding systems.

International lamp coding system (ILCOS)

JIS C 8105-1 ERRATUM 1:2010 勘误表

ERRATUM

NF C17-200F6:2010 关于2007年3月NF C17-200标准的第17-200 F6号解读手册.

Interpretation Manual No. 17-200 F6 on the March 2007 NF C17-200 standard.

NF C17-200F8:2010 关于2007年3月NF C17-200标准的第17-200 F8号解读手册.

Interpretation Manual No. 17-200 F8 on the March 2007 NF C17-200 standard.

NF C17-200F7:2010 关于2007年3月NF C17-200标准的第17-200 F7号解读手册.

Interpretation Manual No. 17-200 F7 regarding the March 2007 NF C17-200 standard.

DIN 67523-2:2010 带辅助照明的人行道的照明(标志293 StVO).第2部分:计算和测量

Lighting of pedestrian crossings (sign 293 StVO) with additional lighting - Part 2: Calculation and measurement

DIN 67523-1:2010 带辅助照明的人行道的照明(符号293 StVO).第1部分:一般质量特征和指导值

Lighting of pedestrian crossings (sign 293 StVO) with additional lighting - Part 1: General quality characteristics and guide values

KS C 3703-2010 隧道照明标准

이 표준은 주로 자동차 교통에 이용되는 도로 터널 및 지하도로(이하 터널이라 한다.)의 조

Recommendation for lighting of traffic tunnels

DIN EN 62386-101:2010 数字可寻址照明接口.第101部分:一般要求.系统(IEC 62386-101-2009).德文版本EN 62386-101-2009

This Standard specifies a protocol for control by digital signals of electronic lighting equipment used on a.c. or d.c. supplies.

Digital addressable lighting interface - Part 101: General requirements - System (IEC 62386-101:2009); German version EN 62386-101:2009

DIN EN 62386-202:2010 数字可寻址照明接口.第202部分:控制装置的特殊要求.自控制应急照明(装置类型1)(IEC 62386-202-2009).德文版本EN 62386-202-2009

This Standard specifies a protocol and test procedures for the control by digital signals of electronic control gear for use on a.c. or d.c. supplies, associated with self-contained emergency lighting.

Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1) (IEC 62386-202:2009); German version EN 62386-202:2009

JIS C 8105-1:2010 照明设备.第1部分:安全性一般要求

Luminaires -- Part 1: General requirements for safety

IEC TR 61341:2010 反光灯的中心光束强度及波束角(s)的测量方法

Method of measurement of centre beam intensity and beam angle(s) of reflector lamps

BS EN 62386-207:2009 数字可寻址灯光接口.控制装置的特殊要求.LED模型(设备类型6)

This International Standard specifies a protocol and test procedures for the control by digital signals of electronic control gear for use on a.c. or d.c. supplies, associated with LED modules. NOTE Tests in this standard are type tests. Requirements for testing individual control gear during production are not included.

Digital addressable lighting interface - Particular requirements for control gear - LED modules (device type 6)

BS EN 61547:2009 一般照明用设备规范.EMC抗扰性要求

This International Standard for electromagnetic immunity requirements applies to lighting equipment which is within the scope of IEC technical committee 34, such as lamps, auxiliaries and luminaires, intended either for connecting to a low voltage electricity supply or for battery operation. Excluded from the scope of this standard is equipment for which the immunity requirements are formulated in other IEC or CISPR standards such as: – lighting equipment for use in transport vehicles; – entertainment lighting control equipment for professional purposes; – lighting devices built into other equipment such as: • scale illumination or indicators; • photocopiers; • slide and overhead projectors; • multimedia equipment. However, in multi-function equipment where the lighting part operates independently from other parts, the electromagnetic immunity requirements of this standard apply to the lighting part. The requirements of this standard are based on the requirements for domestic, commercial and light-industrial environments as given in IEC 61000-6-1, but modified to lighting engineering practice. It can be expected that lighting equipment complying with the requirements of this standard will operate satisfactorily in other environments. In some special cases, measures have to be taken to provide higher immunity. It is impracticable to deal with all these possibilities. Such requirements may be established by contractual agreement between supplier and purchaser.

Equipment for general lighting purposes - EMC immunity requirements

BS EN 62386-206:2009 数字可寻址照明接口.控制装置用详细要求.数字信号转换为直流电压信号(装置类型 5)

This International Standard specifies a protocol and test methods for the control by digital signals of electronic control gear, associated with the conversion from digital signal into d.c. voltage.

Digital addressable lighting interface - Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5)

IEC 61231:2010 国际灯具编码系统(ILCOS)

Scope and object This International Standard gives the rules for the international lamp coding system and covers all lamp categories@ excluding vehicle lamps. Coding for the main lamp types is specified and@ for the others@ will follow by amendments to this standard as appropriate. The object of the international lamp coding system is ?C to improve communication about the different types of lamps; ?C to help in discussions concerning interchangeability and compatibility of products; ?C to create a closer relationship between international standards and manufacturers' literature (for example the code could be given in future in the relevant parts of a standard); ?C to enable correct replacements of lamps; ?C to be used as a complementary marking on the luminaire; ?C to replace national and regional coding systems.

International lamp coding system (ILCOS)

KS C 7654-2009 LED应急灯具的安全和性能要求

이 표준은 화재시 긴급대피를 안내하기 위하여 사용되는 유도등 중에 LED 광원을 사용하는

LED emergency luminaires－Safety and performance requirements

DB12/T 413-2009 LED密排管测试方法

LED close-packed tube test method

NF C71-100*NF EN 61547:2009 一般照明用设备.电磁兼容抗扰度要求

Equipment for general lighting purposes - EMC immunity requirements.