K72 一般灯具 标准查询与下载

IEC 60598-2-2:2011 照明设备.第2部分:嵌灯特殊要求

This part of IEC 60598 specifies requirements for recessed luminaires incorporating electric light sources for operation from supply voltages up to 1 000 V. This section does not apply to air-handling or liquid-cooled luminaires.

Luminaires - Part 2: Particular requirements - Recessed luminaires

IEC 60061-2:1969/AMD44:2011 修正本44灯头, 灯座及检验其互换性和安全性的量规.第2部分: .灯座

This amendment has been prepared by subcommittee 34B: Lamp caps and holders, of IEC technical committee 34: Lamps and related equipment.

Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60598-1:2008/COR1:2011 灯具.第1部分:一般要求和试验

Luminaires - Part 1: General requirements and tests

JIS C 8105-2-3:2011 灯具.第2-3部分:安全性详细要求.道路和街道照明用灯具

This Standard specifies requirements for : —luminaires for road, street lighting and other public outdoor lighting applications; —tunnel lighting; —column-integrated luminaires with a minimum total height above normal ground level of 2.5 m (column-integrated luminaires with a total height 2.5 m or under are under consideration); and for use with electrical lighting sources (an incandescent lamp,a fluorescent lamp, other discharge lamps and electroluminescent devices. such as an LED) on supply voltages not exceeding 1000 V.

Luminaires -- Part 2-3: Particular requirements for safety -- Luminaires for road and street lighting

BS DD IEC/PAS 62722-2-1:2011 灯具性能.LED灯具的特殊要求

Luminaire performance. Particular requirements for LED luminaires

BS DD IEC/PAS 62722-1:2011 灯具性能.一般要求

Luminaire performance. General requirements

UL 1574 CRD-2011 轨道照明系统的UL安全标准. 节/段落参考: 1.7 (新) 主题: 向LED组件和子组件UL 8750添加参考 (第三版: 2004年9月7日)

UL Standard for Safety Track Lighting Systems - Section / Paragraph Reference: 1.7 (NEW) Subject: Add reference to UL 8750 for LED components and subassemblies (Edition 3: September 07, 2004)

SAE J2738-2011 改进的道路照明设备:信息源

Headlamps should illuminate the traffic scene ahead of the vehicle in such a way that the driver can operate the vehicle safely and in a relaxed manner. At the same time, negative effects on drivers of other vehicles, pedestrians and other people should be minimized. Various technical parameters such as beam pattern, mounting height, headlamp aiming, and source spectrum can be tuned to find the necessary compromise. The physiology of the vision system under specific night time conditions strongly influences these factors and how headlamps can be best optimized for visibility and comfort. The SAE Improved Roadway Illumination task force collected and reviewed relevant research on these topics. This document is a comprehensive summary of this information. The goal is to enable lighting experts, advocacy groups, and non-experts (journalists, consumer organizations, car drivers) to better understand the benefits and tradeoffs of improved roadway lighting with modern headlamp technology. It should be noted that all studies can not be included in this report, but the intent of this document is to provide the reader with a representative sample of the existing research as a starting point. Further, this document can be updated in the future to reflect new research findings.

Improved Roadway Illumination: Information Resource

JIS C 8105-2-8:2011 灯具.第2-8部分:安全性详细要求.手持灯

This Standard specifies requirements for handlamps and similar portable luminaires (hereafter referred to as “handlamps”) which are held in the hand, hooked up or resting on a surface for use with electric light sources (an incandescent lamp,a fluorescent lamp,other discharge lamps, and electroluminescent, devices, such as an LED) on supply voltages not exceeding 250 V.

Luminaires -- Part 2-8: Particular requirements for safety -- Handlamps

JIS C 8105-2-20:2011 灯具.第2-20部分:安全性详细要求.灯饰串

This Standard specifies requirements for lighting chains fitted with series-or parallel" or a combination of series/parallel-connected incandescent lamps for use either indoors or outdoors on supply voltages not exceeding 250 V.

Luminaires -- Part 2-20: Particular requirements for safety -- Lighting chains

JIS C 8105-2-7:2011 灯具.第2-7部分:安全性详细要求.园艺用便携式灯具

This Standard specifies safety requirements for portable pedestal luminaires for use in places such as gardens and for portable luminaires for use in places such as flower beds (generically referred to as “portable luminaires for garden use”, and hereafter shortened as “luminaires”), for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 250 V.

Luminaires -- Part 2-7: Particular requirements for safety -- Portable luminaires for garden use

JIS C 8105-2-6:2011 灯具.第2-6部分:安全性详细要求.白炽灯用内装变压器或变换器的光源

This Standard specifies requirements for luminaires with built-in transformers or converters for filament lamps (hereafter referred to as “luminaires”), with supply voltages and output voltages not exceeding : — 1 000 V for Class. 0I, Class I, and Class II luminaires and —150 V for Class 0 luminaires.

Luminaires -- Part 2-6: Particular requirements for safety -- Luminaires with built-in transformers or converters for filament lamps

JIS C 7501:2011 家用和类似普通照明用钨丝灯

Tungsten filament lamps for domestic and similar general lighting purposes

DIN EN 60598-2-20:2011 灯具.第2-20部分:特殊要求.照明系列(IEC 60598-2-20-2010,修订版);德文版本EN 60598-2-20-2010 + Cor.-2010

Luminaires - Part 2-20: Particular requirements - Lighting chains (IEC 60598-2-20:2010, modified); German version EN 60598-2-20:2010 + Cor.:2010

JIS C 7620-2:2010 一般照明用自镇流荧光灯.第2部分:性能规范

Self-ballasted fluorescent lamps for general lighting services -- Part 2: Performance specifications

JIS C 7620-1:2010 一般照明用自镇流灯.第1部分:安全性要求

Self-ballasted fluorescent lamps for general lighting service -- Part 1: Safety specifications

JIS C 7651:2010 一般照明用自镇流荧光灯

Self-ballasted fluorescent lamps for general lighting service

DB13/T 1322-2010 LED路灯

本标准规定了LED路灯的术语和定义、型号和命名、要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于250 V以下直流供电或500 V以下交流供电的道路照明用LED路灯。

LED street light

DIN EN 60081:2010 双端荧光灯.性能要求(修改的IEC 60081-1997 + A1-2000 + A2-2003 + A3-2005 + A4-2010);德文版本EN 60081-1998 + A1-2002 + A2-2003 + A3-2005 + A4-2010

Double-capped fluorescent lamps - Performance specifications (IEC 60081:1997 + A1:2000, modified + A2:2003 + A3:2005 + A4:2010); German version EN 60081:1998 + A1:2002 + A2:2003 + A3:2005 + A4:2010

DIN EN 61549:2010 杂类灯具(IEC 61549-2003 + A1-2005 + A2-2010).德文版本EN 61549-2003 + A1-2005 + A2-2010

Miscellaneous lamps (IEC 61549:2003 + A1:2005 + A2:2010); German version EN 61549:2003 + A1:2005 + A2:2010