L17 电感器、变压器 标准查询与下载

NF C93-367*NF EN 61248-7:1998 电子设备和电信设备用变压器和电感器.第7部分:以容量认可程序为基础的高频变压器分规范

Transformers and inductors for use in electronic and telecommunication equipment. Part 7 : sectional specification for high-frequency transformers on the basis of the capability approval procedure.

NF C93-337*NF EN 61007:1998 电子设备和通信设备用变压器和电感器.测量方法和试验程序

Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures.

NF C93-346:1998 电子和电信设备用固定电感器.标记代码

Fixed inductors for use in electronic and telecommunication equipment. Marking codes.

NF C93-362*NF EN 61248-2:1998 电子和通信设备使用的变压器和感应器.第2部分:以容量认可程序为基础的信号变量器分规范

Transformers and inductors for use in electronic and telecommunication equipment. Part 2 : sectional specification for signal transformers on the basis of the capability approval procedure.

NF C93-364*NF EN 61248-4:1998 电子设备和通信设备用变压器和感应器.第4部分:以容量认可程序为基础的转换模式电源用功率变压器分规范

Transformers and inductors for use in electronic and telecommunication and telecommunication equipment. Part 4 : sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure.

UL 697-1998 玩具用变压器

Toy transformers

DIN EN 61248-3:1998 电子和电信设备用变压器和电感器.第3部份:以性能批准程序为基础的电力变压器分规范

The document specifies how to prepare detail specifications for power transformers to be released under the terms of QC 260000 capability approval.

Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997

DIN EN 61248-4:1998 电子和电信设备用变压器和电感器.第4部分:以性能批准程序为基础的开关模式供电用电力变压器分规范

The document specifies how to prepare detail specifications for SMPS power transformers to be released under the terms of QC 260000 capability approval.

Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996); German

DIN EN 61248-7:1998 电子和电信设备变压器和电感器.第7部分:基于合格认证的HF-电感器和ZF-变压器分规范

The document specifies how to prepare detail specifications for high frequency inductors and itermediate frequency transformers between 10 KHz to 2 MHz for use in electronic and telecommunication equipment to be released under the terms of ISO 61248-1 (QC 260000) capability approval.

Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1996); G

DIN EN 61248-6:1998 电子和电信设备用变压器和电感器.第6部分:以性能批准程序为基础的电感器分规范

The document specifies how to prepare detail specifications for inductors to be released under the terms of QC 260000 capability approval.

Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996); German version EN 61248-6:1997

DIN EN 61248-1:1998 电子和电信设备的变压器和电感器.第1部份:总规范

The document prescribes the requirements that manufacturers of transformers and inductors for use in electronic equipemnt have to comply with in order to obtain capability approval in accordance 11.7 of QC 001002.

Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997

DIN EN 61248-5:1998 电子和电信设备用变压器和电感器.第5部分:以性能批准程序为基础的脉冲变压器分规范

The document specifies how to prepare detail specifications for pulse transformers to be released under the terms of QC 260000 capability approval.

Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996); German version EN 61248-5:1997

DIN EN 61248-2:1998 电子和电信设备的变压器和电感器.第2部份:以性能批准程序为基础的信号变压器分规范

The document specifies how to prepare detail specifications for signal transformers to be released under the terms of QC 260000 capability approval.

Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997

DIN EN 61007:1998 电子和电信设备用变压器和感应器.测量方法和试验程序

The document describes measuring methods and test procedures for inductors and transformers for use in electronic and telecommunicaiton equipment that may be involved in any specification for such components, in particular those forming part of the IEC Quality Assessment System for Electronic Components (IECQ scheme).#,,#

Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (IEC 61007:1994, modified); German version EN 61007:1997

IEEE Std C57.18.10-1998 半导体电力整流器变压器的要求和实施规范

Includes practices and requirements for semiconductor power rectifier transformers for dedicated loads rated single-phase 300 kW and above and three-phase 500 kW and above

Practices and requirements for semiconductor power rectifier transformers

BS EN 61248-7:1998 用于电子和电信设备的变压器和电感器 基于能力批准程序的高频电感器和中间变压器的分规范

This part of IEC 61248 specifies how to prepare detail specifications for high-frequency inductors and intermediate frequency transformers between 10 kHz and 2 GHz for use in electronic and telecommunication equipment to be released under the terms of IEC 61248-1 (QC 260000) capability approval. It includes a blank detail specification (BDS), which shows the format and indicates which tests are considered to be appropriate to this type of component, although the final selection of tests to be included in the inspection schedule is at the discretion of the specification writer. It also lists appropriate ratings and characteristics. The components covered by this part of IEC 61248 are essentially concerned with high-frequency inductors and intermediate frequency transformers of signals which are mainly used for electronic equipment.

Transformers and inductors for use in electronic and telecommunication equipment. Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability approval procedure

SJ 52143/2-1998 J110XBSW3641型无刷双通道旋变变压器详细规范

Brushless two-speed resolver transformer,type J110XBSW3641,detail specification for

SJ 52143/1-1998 J110XFS3642型双通道旋变发送机详细规范

Two-speed resolver transmitter,type J110XFS3642,detail specification for

SJ 51864/1-1998 LGC2B4532、LGC2B3230型片式电感器详细规范

Detail specification for type LGC2B4532、LGC2B3225 chip inductors

NF C46-965-03:1998 远程控制设备和系统.第6部分:ISO标准和ITU-T推荐标准相共处的远程控制协议.第503节:TASE.2服务和协议

Telecontrol equipment and systems. Part 6 : telecontrol protocols compatible with ISO standards and ITU-T recommendations. Section 503 : TASE.2 services and protocol.