L23 连接器 标准查询与下载

BS EN 60512-28-100:2013 电子设备连接器. 试验和测量. IEC 60603-7和IEC 61076-3系列连接器1000 MHz以下的信号完整性试验. 试验28a至28g

Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 1000 MHz on IEC 60603-7 and IEC 61076-3 series connectors. Tests 28a to 28g

NF C93-400-24-1*NF EN 60512-24-1:2013 电子设备连接器.试验和测量.第24-1部分:磁场干扰试验.试验24a:剩磁

Connectors for electronic equipment - Tests and measurements - Part 24-1 : magnetic interference tests - Test 24a : residual magnetism

DIN EN 61169-47:2013 射频连接器.第47部分:75 电缆网络应用的典型带夹接的同轴高频插接件(F-快速型)(IEC 61169-47-2012).德文版本EN 61169-47-2012

Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) (IEC 61169-47:2012); German version EN 61169-47:2012

IEC 61169-43:2013 射频连接器.第43部分:RBMA系列盲插射频(RF)同轴连接器分规范

This part of IEC 61169 which is a sectional specification (SS) provides information and rules for the preparation of detail specifications (DS) for RBMA series RF coaxial connectors@ with characteristic impedance of 50 ??@ with threaded coupling and operating frequency limit up to 12@4 GHz@ used in wireless@ microwave@ telecommunication@ and other fields@ connecting with RF cables or micro-strips. It also prescribes mating face dimensions for general connectors-grade 2@ dimensional details of standard test connectors-grade 0@ gauging information and tests selected from IEC 61169-1@ applicable to all detail specifications relating to RBMA series connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.

Radio-frequency connectors - Part 43: Sectional specification for RBMA series Blind mating RF coaxial connectors.

DIN VDE 0620-1:2013 家用和类似用途插头和插座连接.第1部分:固定插座的通用要求

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements on fixed socket-outlets

DIN VDE 0620-2-1:2013 家用和类似用途插头和固定插座.第2-1部分:插头和便携式插座通用要求

Plugs and socket-outlets for household and similar purposes - Part 2-1: General requirements on Plugs and portable socket-outlets

NF C93-406-2-101*NF EN 61076-2-101:2013 电子设备连接器 - 产品规范 - 第2-101部分: 圆形连接器 - 带螺纹锁紧的M12连接器用详细规范

Connectors for electronic equipment - Product requirements - Part 2-101 : circular connectors - Detail specification for M12 connectors with screw-locking

IEC 60512-28-100:2013 电子设备连接器.试验和测量.第28-100部分:IEC 60603-7和61076-3系列连接器1000 MHz以下的信号完整性试验.试验28a到28g

This part of IEC 60512 specifies the test methods for transmission performance for IEC 60603-7 and IEC 61076-3 series connectors up to 1 000 MHz. It is also suitable for testing lower frequency connectors@ however the test methodology specified in the detailed specification for any given connector remains the reference conformance test for that connector. The test methods provided here are: ?C insertion loss@ test 28a; ?C return loss@ test 28b; ?C near-end crosstalk (NEXT) test 28c; ?C far-end crosstalk (FEXT)@ test 28d; ?C transverse conversion loss (TCL)@ test 28f; ?C transverse conversion transfer loss (TCTL)@ test 28g. For the transfer impedance (ZT) test@ see IEC 60512-26-100@ test 26e. For the coupling attenuation@ see IEC 62153-4-12.

Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1000 MHz on 60603-7 and 61076-3 series connectors - Tests 28a to 28g

DIN EN 60309-1:2013 工业用插头, 插座和耦合器. 第1部分:一般要求 (IEC 60309-1-1999+A1-2005, 修正本+A2-2012); 德文版本EN 60309-1-1999+A1-2007+A2-2012

Plugs, socket-outlets and couplers for industrial purposes.Part 1: General requirements (IEC 60309-1:1999 + A1:2005, modified + A2:2012); German version EN 60309-1:1999 + A1:2007 + A2:2012

DIN EN 50521:2013 光伏系统用连接器.安全性要求和试验.德文版本EN 50521-2008+A1-2012

Connectors for photovoltaic systems - Safety requirements and tests; German version EN 50521:2008 + A1:2012

BS EN 61169-47:2012 射频连接器.75Ω电缆网络应用的典型带夹接的射频同轴连接器的分规范 (F-快速型)

Radio-frequency connectors. Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick)

NF C93-406-3-110:2013 电子设备用连接器.产品要求.第3-110部分:频率在1000 MHz以下的数据传输用铠装的活动和固定连接器的详细规范

Connectors for electronic equipment - Product requirements - Part 3-110 : detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

ANSI/UL 486Ca-2013 分线连接器用安全性标准

Standard for Safety for Splicing Wire Connectors

ANSI/UL 1691-2013 单极锁式可分离连接器的安全性标准

Standard for Safety for Single Pole Locking-Type Separable Connectors

IEC 62843:2013 远程保护和多路复用器设备间的N次64每秒千位光纤接口标准

Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment

IEC 61169-26:2013 射频连接器.第26部分:TNCA系列射频同轴电缆连接器分规范

This part of IEC 61169 which is a sectional specification (SS) provides information and rules for the preparation of detail specifications (DS) for TNCA series RF coaxial connectors@ with characteristic impedance of 50 ??@ with threaded coupling and operating frequency limit up to 18 GHz@ used in wireless@ communication@ instrument@ antenna@ test and measurements@ radar@ and other fields@ connecting with RF cables or micro-strips. It also prescribes mating face dimensions for general connectors-grade 2@ dimensional details of standard test connectors-grade 0@ gauging information and tests selected from IEC 61169-1@ applicable to all detail specifications relating to TNCA series connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. TNCA connectors are recommended for applications above 11 GHz. TNCA connectors are compatible with TNC connectors as described in the IEC 60169-17 and IEC 60169-26 provided that the dielectric of connector with socket-centre contact does not extend beyond reference plane. However when mated with these connectors@ the performances are not ensured. NOTE Attention is drawn to the fact that TNCA interface does not utilize overlapping PTFE dielectric for increased voltage breakdown resistance.

Radio frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors

DIN EN 61076-2-101:2013 电子设备连接器.产品要求.第2-101部分:带螺钉锁紧的M12连接器的详细规范(IEC 61076-2-101-2012).德文版本EN 61076-2-101-2012

Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (IEC 61076-2-101:2012); German version EN 61076-2-101:2012

IEC 61169-42:2013 射频连接器.第42部分:CQN系列快速锁定射频同轴连接器的分规范

This part of IEC 61169@ which is a sectional specification (SS)@ provides information and rules for the preparation of detail specifications (DS) for CQN series RF coaxial connectors@ with characteristic impedance of 50 ??@ with threaded coupling and operating frequency limit up to 11 GHz@ used in wireless@ microwave@ telecommunication@ and other fields@ connecting with RF cables or micro-strips. It also prescribes mating face dimensions for general connectors-grade 2@ dimensional details of standard test connectors-grade 0@ gauging information and tests selected from IEC 61169-1@ applicable to all detail specifications relating to CQN series connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H (see Tables 8 and 9).

Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock R.F. coaxial connectors

ANSI/EIA 364-61:2013 电连接器和插座用耐焊接热试验规程的返工

Rework Resistance to Soldering Heat Test Procedure for Electrical Connectors and Sockets

ANSI/UL 486C-2013 分线连接器用安全性标准

Standard for Safety for Splicing Wire Connectors