L23 连接器 标准查询与下载
共找到 3934 条与 连接器 相关的标准，共 263 页
Standard for Safety for Splicing Wire Connectors
- ICS
- 29.120.20
- CCS
- L23
- 发布
- 2013
- 实施
1.1 This specification establishes the requirements for copper alloy strip for use in the manufacture of electrical connectors or spring contacts produced from one of the following Copper Alloy UNS Nos.2: C14530, C15100, C15500, C17000, C17200, C17410, C17450, C17460, C17500, C17510, C19002, C19010, C19015, C19025, C19210, C19400, C19500, C19700, C23000, C26000, C40810, C40850, C40860, C42200, C42500, C42520, C42600, C50580, C50780, C51000, C51080, C51100, C51180, C51980, C52100, C52180, C52480, C63800, C64725, C65400, C68800, C70250, C70260, C70265, C70310, C75200, and C76200. 1.2 The requirements for the other copper alloys such as copper-nickel-tin spinodal, UNS C72650, C72700, and C72900, shall be as prescribed in the current edition of Specification B740. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
- ICS
- 29.050 (Superconductivity and conducting materials
- CCS
- L23
- 发布
- 2013
- 实施
Connectors for electronic equipment. Tests and measurements. Magnetic interference tests. Test 24a: Residual magnetism
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-12-31
- 实施
- 2012-12-31
J13B Series Micro Rectangular Electrical Connector Specifications
- ICS
- CCS
- L23
- 发布
- 2012-12-28
- 实施
- 2013-06-01
Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz (IEC 61076-3-110:2012); German version EN 61076-3-110:2012
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-12
- 实施
- 2012-12-01
This part of IEC 61169 which is a sectional specification (SS) provides information and rules for preparation of detail specification of SMP series push-on RF coaxial connectors together with the pro-forma blank detail specification. The SMP push-on series connectors with characteristic impedance of 50 ?? are used with RF cables or micro-strips in microwave@ telecommunication@ wireless and other fields. The operating frequency limit is up to 40 GHz. It also prescribes mating face dimensions for general purpose connectors- grade 1@ dimensional details of standard test connectors- grade 0@ gauging information and tests selected from IEC 61169-1@ applicable to all detail specifications relating to series SMP RF connectors. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only.
Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors
- ICS
- 33.120.30
- CCS
- L23
- 发布
- 2012-12
- 实施
- 2012-12-14
Connectors for electronic equipment. Tests and measurements. Test schedule for engaging and separating connectors under electrical load. Test 99a. Connectors used in twisted pair communication cabling with remote power
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-11-30
- 实施
- 2012-11-30
Connectors for electronic equipment - Tests and measurements - Part 16-21 : mechanical tests on contacts and terminations - Test 16u : whisker test via the application of external mechanical stresses
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-11-01
- 实施
- 2012-11-10
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses (IEC 60512-16-21:2012); German version EN 60512-16-21:201
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-11
- 实施
- 2012-11-01
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock (IEC 60309-4:2006, modified + A1:2012); German version EN 60309-4:2007 + A1:2012
- ICS
- 29.120.30
- CCS
- L23
- 发布
- 2012-11
- 实施
- 2012-11-01
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function (IEC 61076-4-116:2012); German version EN 61076-4-116:2012
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-11
- 实施
- 2012-11-01
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications (IEC 60512-1-100:2012); German version EN 60512-1-100:2012
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-10-01
- 实施
- 2012-10-01
Connectors for electronic equipment - Product requirements - Part 2: sectional specification for circular connectors
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-10-01
- 实施
- 2012-10-26
Connectors for photovoltaic systems - Safety requirements and tests
- ICS
- 27.160;29.120.30
- CCS
- L23
- 发布
- 2012-10-01
- 实施
- 2012-10-26
Connectors for electronic equipment. Product requirements. Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 MHz
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-09-30
- 实施
- 2012-09-30
Connectors for electronic equipment - Tests and measurements - Part 9-2 : endurance tests - Test 9b : electrical load and temperature
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-09-01
- 实施
- 2012-09-15
Connectors for electronic equipment - Tests and measurements - Part 7-2 : impact Tests (free connectors)- Test 7b : mechanical strength impact
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-09-01
- 实施
- 2012-09-15
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
- ICS
- 43.040.10;43.120
- CCS
- L23
- 发布
- 2012-09-01
- 实施
- 2012-09-15
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification (IEC 60874-1-1:2011); German version EN 60874-1-1:2012
- ICS
- 33.180.20
- CCS
- L23
- 发布
- 2012-09
- 实施
- 2012-09-01
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g (IEC 60512-27-100:2011); German version EN 60512-27-100:2012
- ICS
- 31.220.10
- CCS
- L23
- 发布
- 2012-09
- 实施
- 2012-09-01
