L23 连接器 标准查询与下载



共找到 3934 条与 连接器 相关的标准,共 263

The correction was necessary to correct an inaccuracy that had been introduced in the national adoption of IEC 61076-2-104. The change applies to 6.4.2 in test procedure AP3 and relates to the acceleration to be applied.

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking (IEC 61076-2-104:2014); German version EN 61076-2-104:2014; Corrigendum 1

ICS
31.220.10
CCS
L23
发布
2021-03-01
实施

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for coaxial connectors with 9.5 mm inner diameter of outer conductor and quick lock coupling mechanism, characteristic impedance 50 Oh

Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5 (IEC 61169-61:2020); German version EN IEC 61169-61:2020

ICS
33.120.30
CCS
L23
发布
2021-03-01
实施
2021-03-01

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F).

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) (IEC 61169-24:2019); German version EN IEC 61169-24:2019

ICS
33.120.30
CCS
L23
发布
2021-03-00
实施
2021-03-01

This part of IEC 61169 provides test methods for the voltage standing wave ratio, return loss and reflection coefficient of the RF connector, including frequency domain method, time domain method, and the gating time domain method.

Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient (IEC 61169-1-4:2020); German version EN IEC 61169-1-4:2020

ICS
33.120.30
CCS
L23
发布
2021-03-00
实施
2021-03-01

Radio frequency connectors -- Part 1: Generic specification -- General requirements and measuring methods

ICS
33.120.30
CCS
L23
发布
2021-02-22
实施

This standard applies to plugs and coupling boxes only for alternating current (AC), with or without a protective earth contact, with a rated voltage exceeding 50 V but not exceeding 440 V, and with a rated current not exceeding 32 A, intended for household or similar use, either

Plugs and socket-outlets for household and similar purposes - Part 2-1: General requirements on Plugs and portable socket-outlets

ICS
29.120.30
CCS
L23
发布
2021-02-00
实施
2021-02-01

This International Standard covers hybrid rectangular connectors with a 3 poles 16 A electric portion (2P+PE or 2P+FE) for power supply and one duplex fibre optic connector type LC portion for data transmission. These connectors consist of fixed and free connectors, either rewira

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull loc

ICS
31.220.10
CCS
L23
发布
2021-02-00
实施
2021-02-01

This part of IEC 60512, when required by the detail specification, is used for testing connectors or solderless connections within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this document is

Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2020); German version EN IEC 60512-9-5:2020

ICS
31.220.10
CCS
L23
发布
2021-02-00
实施
2021-02-01

This part of IEC 61169 provides test methods for the insertion loss of radio frequency(RF) 3 connector. This part is applicable to cable RF connectord, microstrip RF connectors and RF connector adapters. It is also applicable to RF channels in multi-channel RF connectors and mixe

Radio-frequency connectors - Part 1-2: Electrical test methods - Insertion loss (IEC 61169-1-2:2019); German version EN IEC 61169-1-2:2019

ICS
33.120.30
CCS
L23
发布
2021-02-00
实施
2021-02-01

This standard applies to fixed socket-outlets for a.c. only, with or without earthing contact, with a rated voltage greater than 50 V but not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, either indoors or outdoors.

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements on fixed socket-outlets

ICS
29.120.30
CCS
L23
发布
2021-02-00
实施
2021-02-01

Appliance couplers for household and similar general purposes -- Part 1: General requirements (Amendment 1)

ICS
29.120.30
CCS
L23
发布
2021-01-20
实施

Appliance couplers for household and similar general purposes -- Part 3: Standard sheets and gauges (Amendment 1)

ICS
29.120.30
CCS
L23
发布
2021-01-20
实施

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling with a characteristic imped

Radio-frequency connectors - Part 15: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling - Characteristic impedance 50 (type SMA)

ICS
33.120.30
CCS
L23
发布
2021-01-01
实施

This part of IEC 60352 is applicable to spring clamp connections made with stripped wire without further preparation: solid conductors of 0,32 mm to 3,7 mm nominal diameter (0,08 mm2 to 10 mm2 crosssection), or; stranded conductors of 0,08 mm2 to 10 mm2 cross-section, or; flexibl

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

ICS
31.220.10
CCS
L23
发布
2020-12-00
实施

Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors

ICS
31.220.01
CCS
L23
发布
2020-11-26
实施
2020-11-26

Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 1: General and guidance

ICS
33.180.20
CCS
L23
发布
2019-06-20
实施

Appliance couplers for household and similar general purposes -- Part 1: General requirements

ICS
29.120.30
CCS
L23
发布
2019-03-20
实施

Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges; Amendment 1

ICS
29.120.30
CCS
L23
发布
2018-10-00
实施
2018-10-16

This part of the lEC 60320 sets the dimensions for appliance couplers for two poles and two poles with earth contact for the connection of electrical devices for household and similar onto the mains supply and; for the interconnection of the electrical supply to appliance or equipment; and dimensions for gauges.

Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges

ICS
29.120.30
CCS
L23
发布
2018-10-00
实施

This part of IEC 62005 gives the requirements for the reliability qualification of passive optical components when used in high optical power applications for the environmental category C.

Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C

ICS
33.180.20
CCS
L23
发布
2018-07-01
实施
2018-07-28



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号