L23 连接器 标准查询与下载

IEC 60320-2-3:2018 家用和类似一般用途电器耦合器.第2-3部分:保护等级高于IPX0的电器耦合器

This clause of IEC 60320-1 applies with the following addition: This document applies to appliance couplers with a degree of protection against ingress of water higher than IPX0.

Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0

NF C93-560-52*NF EN 61169-52:2018 射频连接器.第52部分:系列MMCX RF同轴连接器分规格

Radio-frequency connectors - Part 52 : sectional specification for series MMCX RF coaxial connectors

DIN EN 61076-3-122:2018 电气和电子设备连接器.产品要求.第3-122部分:恶劣环境下I/O和兆位以太网应用的8路屏蔽式非固定和固定连接器详细规格(IEC 61076-3-122-2017);德文版本EN 61076-3-122-2017

This part of IEC 61076 covers 8-way, shielded, free and fixed rectangular connectors for I/O and Gigabit Ethernet applications, suitable for use in harsh environments, and is intended to specify the common dimensions, mechanical, electrical and environmental characteristics and tests for this family of connectors.

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments (IEC 61076-3-122:2017); German vers

IEC 60320-2-1:2018 家用和类似一般用途电器耦合器 第2-1部分:缝纫机耦合器

This clause of IEC 60320-1 is replaced as follows: This part of IEC 60320 is applicable to special purpose appliance couplers for household sewing machines. These sewing machine couplers are for alternating current only and have a rated voltage not exceeding 250 V and a rated current not exceeding 2,5 A. The sewing machine couplers can include two or more contacts depending on the control components or circuitry required to operate the sewing machine and can be with or without earthing contact.

Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers

DIN EN 61169-11:2018 射频连接器.第11部分:带内径9,5mm的螺纹联接外部导体的射频同轴连接器分规格.特性阻抗50 Ώ(4,1-9,5型) (IEC 61169-11-2017);德文版本EN 61169-11-2017

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with threaded coupling, typically for use in 50 Ohm cable networks (4.1-9.5).

Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 Ώ (type 4,1-9,5) (IEC 61169-11:2017); German version EN 61169-11:201

IEC 61076-3-119:2017 电气和电子设备用连接器. 产品要求. 第3 - 119部分:矩形连接器. 频率高达100 MHz的工业环境用带推挽耦合的屏蔽和非屏蔽自由和固定10路连接器的详细规范

This part of IEC 61076-3 establishes specifications and test requirements for 10-way shielded and unshielded rectangular, free and fixed connectors, with push-pull coupling, for data transmission with frequencies up to 100 MHz and for use in industrial environments. This document specifies free and fixed connectors with round contacts, suitable for screw or crimp terminations. Other terminations techniques, such as solder or printed board connections are upon agreement between manufacturer and user. The free and fixed connectors have a push-pull locking mechanism for IP65 and IP67 protection according to IEC 60529. Connectors according this document are without breaking capacity COC according to 3.9 of IEC 61984:2008, therefore they are not intended to be engaged or disengaged in normal use when live or under load, if not otherwise specified by the manufacturer.

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for dat

SJ/T 11695-2017 电动汽车电机控制器电源线通用规范

General Specification for Electric Vehicle Motor Controller Power Cords

BS EN 61076-3-122:2017 电气和电子设备连接器.产品要求.恶劣环境下I/O和兆位以太网应用的8路屏蔽式非固定和固定连接器详细规格

Connectors for electrical and electronic equipment. Product requirements. Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments

DIN VDE 0620-2-1/A1:2017 家用和类似用途的插头和插座 第 2-1 部分：插头和便携式插座的一般要求；修正案 A1

This standard applies to plugs and portable socket-outlets for a.c. only, with or without earthing contact, with a rated voltage greater than 50 V but not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, either indoors or outdoors.

Plugs and socket-outlets for household and similar purposes - Part 2-1: General requirements on Plugs and portable socket-outlets; Amendment A1

DIN VDE 0620-1/A1:2017 家用和类似用途的插头和插座 第1部分：固定式插座的一般要求；修正案 A1

This standard applies to fixed socket-outlets for a.c. only, with or without earthing contact, with a rated voltage greater than 50 V but not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, either indoors or outdoors.

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements on fixed socket-outlets; Amendment A1

DIN EN 61076-3-120:2017 电子设备连接器. 产品要求. 第3-120部分: 矩形连接器. 直流额定电压250 V, 额定电流30 A的带弹簧锁可重接电源连接器详细规格(IEC 61076-3-120-2016); 德文版本

Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A (IEC 61076-3-120:2016); Germa

IEC 60603-7-81:2015/COR1:2017 电子设备连接器 第 7-81 部分：频率高达 2000 MHz 的数据传输用 8 路、屏蔽、自由和固定连接器的详细规范 勘误表 1

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 MHz - Corrigendum 1

DIN EN 61076-3-110:2017 电子设备用连接器.产品要求.第3-110部分:频带在3000 MHz以下的数据传输用活动和固定连接器的详细规范(IEC 61076-3-110-2016)；德文版本EN 61076-3-110-2016

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz (IEC 61076-3-110:2016); German version EN 61076-3-110:2016

DIN EN 61169-58:2017 射频连接器. 第58部分: 盲插连接射频同轴连接器分规格. 特性阻抗50 Ώ (SBMA型) (IEC 61169-58-2016); 德文版本EN 61169-58-2016

Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 ? (type SBMA) (IEC 61169-58:2016); German version EN 61169-58:2016

DIN EN 61169-54:2017 射频连接器. 第54部分: 带有内径10 mm的外部导体以及标称特性阻抗50 Ώ的4,3-10系列同轴连接器分规格(IEC 61169-54-2016); 德文版本EN 61169-54-2016

Radio-frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 ?, series 4,3-10 (IEC 61169-54:2016); German version EN 61169-54:2016

IEC 61076-3-104:2017 电器和电子设备连接器.产品要求.第3-104部分:频率为2000 MHz以下的数据传输用固定式无屏蔽8路连接器的详细规范

This part of IEC 61076 establishes uniform specifications, type testing requirements for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2000 MHz, and used as category 7A connectors in class FA cabling systems specified in ISO/IEC 11801-1. It contains all test methods and sequences, severity and preferred values for dimensions and characteristics.

Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2000 MHz

IEC 61076-3-122:2017 电气和电子设备连接器 产品要求 第 3-122 部分：用于恶劣环境中 I/O 和千兆以太网应用的 8 路、屏蔽、自由和固定连接器的详细规范

This part of IEC 61076 covers 8-way, shielded, free and fixed rectangular connectors for I/O and Gigabit Ethernet applications, suitable for use in harsh environments, and is intended to specify the common dimensions, mechanical, electrical and environmental characteristics and tests for this family of connectors.

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments

IEC 61169-59:2017 射频连接器. 第59部分: L32-4和L32-5型螺纹式多芯射频连接器分规格

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for type L32-4 and L32-5 threaded multi-pin radio frequency connectors with anti mismating mechanism, 50 Ώ nominal impedance. The operating frequency of each channel is up to 4 GHz. These connectors have been widely used in mobile communication system like TD-SCDMA and TD-LTE, and can also be used in some similar equipment. It also prescribes mating face dimensions for general connectors-grade 2, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to type L32-4 and L32-5 multi-pin connectors. This sectional specification provides information and rules for the preparation of detail specifications for type L32-4 and L32-5 multi-pin connectors together with the pro forma blank detail specification. This specification indicates the recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.

Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors

BS PD IEC/TS 63066:2017 可移动能源储存装置的低压扩展坞接口

Low-voltage docking connectors for removable energy storage units

IEC 61169-11:2017 射频连接器. 第11部分: 带内径9,5 mm的螺纹联接外部导体的射频同轴连接器分规格. 特性阻抗50 (4,1-9,5型)

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with threaded coupling, typically for use in 50 cable networks (type 4,1-9,5). This document prescribes mating face dimensions for general purpose connectors - grade 2, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series 4,1-9,5 RF connectors. This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. The 4,1-9,5 types RF coaxial connectors with nominal impedance 50 are threaded coupling units which are used with all kinds of RF cables and microstrips in microwave transmission systems. And the working frequency is up to 14 GHz. NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only.

Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - Characteristic impedance 50 (type 4,1-9,5)