L26 波导同轴元件及附件 标准查询与下载

SJ 1632-1980 波导元件型号命名方法

Type designation system for waveguide components

DIN 47302-1:1980 空心金属波导管.矩形波导管、尺寸

Hollow metallic waveguides; rectangular waveguides, dimensionsZusammenhang mit den von der International Electrotechnical Commission (IEC) herausgegebenen Publikationen 153-2/1974 und 153-3/1964, siehe Erl?uterungen.

Hollow metallic waveguides; rectangular waveguides, dimensions

DIN 47302-2:1980 空心金属波导管.圆形波导管、尺寸

Hollow metallic waveguides; circular waveguides, dimensionsZusammenhang mit der von der International Electrotechnical Commission (IEC) herausgegebenen Publikation 153-4/1973, siehe Erl?uterungen.

Hollow metallic waveguides; circular waveguides, dimensions

IEC 60154-2/COR1:1980 波导用法兰 第2部分：普通矩形波导用法兰的有关规范（2.0版）

Flanges for waveguides Part 2: Relevant specifications for flanges for ordinary rectangular waveguides (Edition 2.0)

IEC 60154-2:1980 波导法兰盘 第2部分:普通矩形波导法兰盘的有关规范

Gives information on the reflections occurring at the flange joint and divides these into reflections caused by the allowed deviations on the internal dimensions of the waveguides, reflections caused by lateral displacements of the two flange assemblies,

Flanges for waveguides. Part 2 : Relevant specifications for flanges for ordinary rectangular waveguides

NF C93-613:1979 电气设备元件压电器件压电滤波器晶体滤波器的使用指南

Components for Electric Equipment Piezoelectric devices Piezoelectric filters Guide to the Use of Crystal Filters

Components for Electric Equipment Piezoelectric devices Piezoelectric filters Guide to the Use of Crystal Filters

DIN 47302-10:1979 第10部分:金属空心波导管的要求

Hollow metallic waveguide; requirementsZusammenhang mit den von der International Electrotechnical Commission (IEC) herausgegebenen Publikationen 153-1/1964, 153-2/1974, 153-3/1964, 153-4/1973 und 153-7/1972, siehe Erl?uterungen.

Hollow metallic waveguide; requirements

IEC 60642:1979 频率控制和选择用压电陶瓷谐振子和谐振器 第1章:标准值和条件 第2章:测量和试验条件

Establishes uniform conditions for assessing the mechanical, electrical and climatic properties. Describes test methods, includes recommendations for standard values and tolerances and gives guidance for the use of these resonators. An appendix gives gen

Piezoelectric ceramic resonators and resonator units for frequency control and selection. Chapter I: Standard values and conditions. Chapter II: Measuring and test conditions

IEC 60636:1979 软波导组件性能

Defines the principal electromechanical characteristics and test methods enabling the performance of the recommended types to be verified. Specifies the terminology to be used in this connection. Indicates the components making up the type designation an

Flexible waveguide assembly performance

HD 123.7 S1-1977 空心金属波导管.第7部分:方波导管的有关规范

Hollow metallic waveguides; part 7: relevant specifications for square waveguides

HD 129.7 S1-1977 波导管法兰.第7部分:方波导管法兰的有关规范

Flanges for waveguides; part 7: relevant specifications for flanges for square waveguides

HD 129.4 S1-1977 波导管法兰.第4部分:圆波导管法兰的有关规范

Flanges for waveguides; part 4: relevant specifications for flanges for circular waveguides

HD 123.4 S1-1977 空心金属波导管.第4部分:圆波导管的有关规范

Hollow metallic waveguides; part 4: relevant specifications for circular waveguides

HD 123.3 S1-1977 空心金属波导管.第3部分:扁平矩形波导管的有关规范

Hollow metallic waveguides; part 3: relevant specifications for flat rectangular waveguides

HD 123.2 S1-1977 空心金属波导管.第2部分:普通矩形波导管的有关规范

Hollow metallic waveguides; part 2: relevant specifications for ordinary rectangular waveguides

HD 123.1 S1-1977 空心金属波导管.第1部分:一般要求和测量方法

Hollow metallic waveguides; part 1: general requirements and measuring methods

DIN 47659:1975 150mm以下的波纹同心铜导线接地连接器

Earthing connector for corrugated concentric copper-conductor up to 150 mm

Earthing connector for corrugated concentric copper-conductor up to 150 mm<(hoch)2>

IEC 60154-7:1974 波导法兰盘 第7部分:方波导法兰盘的有关规范

Details the components making up the flange designation. Specifies the mechanical requirements such as kind of locating holes, shank diameter of fixing bolts used for locating, relation between shank and locating hole diameters, overall dimensions and th

Flanges for waveguides. Part 7 : Relevant specifications for flanges for square waveguides

IEC 60153-2:1974 空心金属波导 第2部分:普通矩形波导的有关规范

Details the components making up the type designation. Defines the frequency range and specifies the mechanical requirements covering dimensions, eccentricity, and rectangularity of cross-section. Describes the electrical tests and a gas tightness test.

Hollow metallic waveguides. Part 2 : Relevant specifications for ordinary rectangular waveguides

DIN 46274:1973 B型套筒端子

Sleeve terminals BEs wird auf die Bestimmung VDE 0609 und die Empfehlung 2 der Internationalen Commission für Regeln zur Begut-achtung elektrotechnischer Erzeugnisse (CEE) hingewiesen, siehe Erl?uterungen.Diese Norm gilt nicht für Klemmk?rper aus Blech

Sleeve terminals B