L35 电真空器件综合 标准查询与下载

IEC 60151-6:1965 电子管电性能的测量 第6部分:对电子管施加机械冲击(脉冲)激励的方法

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of the equipment. The definition and measuring conditions are dealt with and a mechanical shock (impulse) excitation equipment is described in Ap

Measurements of the electrical properties of electronic tubes. Part 6 : Methods of application of mechanical shock (impulse) excitation to electronic tubes and valves

ARMY MIL-C-14041 B-1964 M12型医疗抗菌帽

This specification covers a vinyl plastic bag.

CARRIER, HOSPITAL PROTECTOR HEADPIECE, M12

IEC 60151-7:1964 电子管电性能的测量 第7部分:等效噪声电阻的测量

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods. The main causes of noise in i.f. and r.f. amplifiers and mixers are shot effect and partition noise. The equivalent noise r

Measurements of the electrical properties of electronic tubes. Part 7 : Measurement of equivalent noise resistance

IEC 60151-5:1964 电子管电性能的测量 第5部分:嘘声和哼声的测量方法

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods. The definitions are given and measuring methods including a measuring circuit are described. Additionally precautions are o

Measurements of the electrical properties of electronic tubes. Part 5 : Methods of measuring hiss and hum

IEC 60151-1:1963 电子管电性能的测量 第1部分:电极电流的测量

Outlines the conditions to be followed when measuring. Does not deal with measuring methods. Measurements under static and under dynamic conditions are defined.

Measurements of the electrical properties of electronic tubes. Part 1 : Measurement of electrode current

IEC 60151-2:1963 电子管电性能的测量 第2部分:热丝或灯丝电流的测量

This document outlines the requirements to be followed when measuring. The measuring conditions are defined and precautions are described. Measuring methods are not included.

Measurements of the electrical properties of electronic tubes. Part 2 : Measurement of heater or filament current

IEC 60151-3:1963 电子管电性能的测量 第3部分:等效输入和输出导纳的测量

Outlines conditions to be followed when measuring. Does not include measuring methods. Definitions of the admittances to be measured and details of a standard adaptor and shielding are given.

Measurements of the electrical properties of electronic tubes. Part 3 : Measurement of equivalent input and output admittances

ANSI/EIA 209-A:1963 电子管、管座、管帽及管脚(包括尺寸)的尺寸特性

Electron Tubes, Bases, Caps, and Terminals (including Gages), Dimensional Characteristics of

BS 3504:1962 电子管阴极用镁活性镍规范

Specifies the composition, mechanical properties and finish of two grades of magnesium-activated nickel (0.075 and 0.050 per cent magnesium) in the form of tube, strip, tape or wire used in the manufacture of oxide-coated cathodes for electronic tubes and valves.

Specification for magnesium-activated nickel for cathodes of electronic tubes and valves

IEC 60100:1962 电子管极间电容的测量方法

Applies to receiving tubes and valves, to cathode-ray tubes, gas tubes and gas-filled valves, phototubes, photocells and multiplier types, high-power vacuum tubes and valves. The systems of symbols used for interelectrode capacitance, the conditions and

Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves

ARMY MIL-C-14285 A-1961 抗朦设备螺丝帽外壳

This specification-covers a can for use as a container for an anti-dim cloth.

CAN, SCREW CAP; FOR ANTI-DIM SET

IEC 60135:1961 电子管电极的编号和零部件的命名方法

Applies to multi-electrode tubes with the exception of cathode-ray tubes. It describes the system used for numbering of electrodes in single-unit tubes and in multiple-unit tubes and valves. Examples are given illustrating the specification.

Numbering of electrodes and designation of units in electronic tubes and valves

JIS C 7004:1963 摄像管型号名称与符号系统

Type designation system for pick-up tubes

SJ/T 10866-1996 盘封管电性能测试方法 频率位置的测试方法

Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the frequency position

SJ/T 10867-1996 盘封管电性能测试方法 谐振腔无载品质因数Q的测试方法

Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the resonator unloaded Q

SJ 20670-1998 锆铝吸气剂规范

本规范规定了非蒸散锆铝吸气剂的要求、质量保证规定及交货准备。 本规范适用于电子管、电光源、吸气泵等器件所用的锆铝吸气剂。

Specification for Zr-Al getters

SJ/Z 9010.11-1987 电子管电性能的测试 第11部分：射频输出功率的测试方法

本文件是以测试射频输出功率的现行实践为基础的。它并不作为标准性质的推荐文件，因为如果要以这些原理为基础的测试结果必须在限定的公差以内比较，对测试方法则需要有更加详细的说明。

Measurements of electrical properties of electronic tubes and valves--Part 11: Methods of measurement of radio-frequency output power

SJ/Z 9010.6-1987 电子管电性能的测试 第6部分：对电子管加机械冲击的方法

本文件扼要叙述了对电子管加机械冲击的方法。这个方法是以施加冲击的现行实践为基础的。它并不作为标准性质的推荐文件，因为如果以这些原理为基础的测试的结果必须在限定的公差以内比较，对测试设备必须有更加详细的说明。

Measurements of electrical properties of electronic tubes and valves--Part 6: Methods of application of mechanical shock(impulse excitation) to electronic tubes and valves

SJ/Z 9010.0-1987 电子管电性能的测试 第0部分：电子管测试方法有关的注意事项

本通用部分关于测试的共性方面，除非另有规定，只列出要采用的注意事项。以保证测试的可靠性，而且也要与各个独立部分所述的测试方法联系起来理解。 各个独立部分包括下列项目： (a)补充国际电工辞典的名词术语和定义 (b)基本原理 (c)基本电路 (d)测试条件和注意事项

Measurements of electrical properties of electronic tubes and valves--Part 0: Precautions relating to methods of measurement of electronic tubes and valves

SJ 20164-1992 电子管J305βγ型辐射计数管详细规范

Electron tube--Detail specification for radiation counter tube of Type J305βγ