L85 电子测量与仪器综合 标准查询与下载

DIN EN 55016-2-2:2011 无线电干扰和抗扰测量仪器和方法用规范.第2-2部分:干扰和抗扰的测量方法.干扰功率测量(CISPR 16-2-2-2010);德文版本EN 55016-2-2-2011

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power (CISPR 16-2-2:2010); German version EN 55016-2-2:2011

DIN EN 55016-2-1:2011 无线电干扰和抗扰测量仪及方法用规范.第2-1部分:干扰和抗扰度的测量方法.传导干扰测量(CISPR 16-2-1-2008 + A1-2010);德文版本EN 55016-2-1-2009 + A1-2011

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements (CISPR 16-2-1:2008 + A1:2010); German version EN 55016-2-1:2009 + A1:2011

DIN EN 55016-1-1:2011 无线电干扰和抗扰测量仪及方法用规范.第1-1部分:无线电干扰和抗扰测量仪.测量仪器(IEC/CISPR 16-1-1-2010 + A1-2010);德文版本EN 55016-1-1-2010 + A1-2010

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus (IEC/CISPR 16-1-1:2010 + A1:2010); German version EN 55016-1-1:2010 + A1:2010

DIN EN 55016-1-4:2011 无线电干扰和抗扰测量仪及方法用规范.第1-4部分:无线电干扰和抗扰测量仪.辐射干扰测量用天线和试验场地(IEC/CISPR 16-1-4-2010+Cor.-2010).德文版本EN 55016-1-4-2010

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements (IEC/CISPR 16-1-4:2010 + Cor. :2010); German ve

DIN EN 55016-2-3:2011 无线电干扰和抗扰测量仪器和方法规范.第2-3部分:干扰和抗扰测量方法.辐射干扰测量(IEC/CISPR 16-2-3-2010+A1-2010).德文版本EN 55016-2-3-2010+A1-2010

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (IEC/CISPR 16-2-3:2010 + A1:2010); German version EN 55016-2-3:2010 + A1:2

NF C91-016-2-3/A1:2011 无线电干扰和抗扰测量设备和方法的规范.第2-3部分:干扰和抗扰度测量方法.辐射干扰测量.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3 : methods of measurement of disturbances and immunity - Radiated disturbance measurements.

JIS X 6319-1:2010 集成电路卡用仪器规范.第1部分:带触点集成电路卡

Specification of implementation for integrated circuit cards -- Part 1: Integrated circuit cards with contacts

NF C91-016-1-4:2010 无线电干扰和抗扰测量设备和方法的规范.第1-4部分:无线电干扰和抗扰测量仪.辐射干扰测量用天线和试验场地.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4 : radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements.

BS EN 55016-1-4:2010 无线电干扰和抗干扰测量装置和方法用规范.无线电干扰和抗干扰测量装置.辐射干扰测量用天线和试验场

This part of CISPR 16 specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications for antennas and test sites are included. NOTE In accordance with IEC Guide 107, CISPR 16-1-4 is a basic EMC publication for use by product committees of the IEC. As stated in Guide 107, product committees are responsible for determining the applicability of the EMC standard. CISPR and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular EMC tests for specific products. The requirements of this publication apply at all frequencies and for all levels of radiated disturbances within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2-3, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

BS EN 55016-1-4:2010+A1:2012 无线电干扰和抗干扰测量装置和方法用规范.无线电干扰和抗干扰测量仪器.辐射干扰测量用天线和试验场

Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance measurements

CISPR 16-2-2-2010 国际无线电干扰特别委员会基本EMC出版物无线电干扰和抗扰度测量设备规范和测量方法.第2-2部分:无线电干扰和抗扰度测量方法-干扰功率测量

This part of CISPR 16 specifies the methods of measurement of disturbance power using the absorbing clamp in the frequency range 30 MHz to 1 000 MHz.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

CISPR 16-2-1 AMD 1-2010 国际无线电干扰特别委员会修改件1.无线电干扰和抗扰度测量设备和测量方法规范测量方法.第2-1部分:无线电干扰和抗扰度测量方法 - 传导干扰测量

All stated specifications in CISPR 16-2-1 are met by an instrument independent of the selected implementation or technology in order to be considered suitable for measurements in accordance with CISPR standards. The addition of FFT-based measuring instrumentation requires further specifications as addressed in this amendment. A new Annex F is added as a result of provisions recently introduced into CISPR 16-1-1 on the use of spectrum analyzers for compliance measurements.

INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE AMENDMENT 1 Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-1: Methods of measurement of disturbances and immunity – Conducted disturbance measurements

IEEE Std C63.15-2010 电气和电子设备抗扰度测量用美国国家标准推荐性操作规程

IMPORTANT NOTICE: This standard is not intended to ensure safety, security, health, or environmental protection. Implementers of the standard are responsible for determining appropriate safety, security, environmental, and health practices or regulatory requirements. This IEEE document is made available for use subject to important notices and legal disclaimers. These notices and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html. The conducted immunity (CI) and radiated immunity (RI) test methods in this recommended practice do not universally apply to every product. Applicable test methods should be selected. A qualified EMC engineer should document test planning and the rationale for using particular immunity tests. This document is intended to a) Identify preferred or optional immunity test methods. b) Describe specific measurement techniques. c) Suggest product performance degradation criteria as applicable to general and specific products. d) Identify test instrumentation specifications. Wherever possible, existing voluntary standards are utilized and summarized. It should be noted that the techniques listed herein should in no way limit the user to a particular method to increase product immunity. The immunity levels in this document are recommended. Should product classifications and type have other immunity levels that apply, they shall take precedence. Equipment developed for military applications should use MIL-STD-461E1 or later editions for test procedures and limits.

American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment

KS B ISO 14839-3:2009 机械振动.装配有主动磁性轴承的旋转机械装置的振动.第3部分:稳定边际评估

이 표준은 능동 자기 베어링(AMB/Active Magnetic Bearing)(이하 AM

Mechanical vibration-Vibration of rotating machinery equipped with active magnetic bearings-Part 3:Evaluation of stability margin

BS PD CISPR/TR 16-2-5:2008 无线电干扰和抗扰度测量仪器和方法规范.第2-5部分:由体积较大的设备产生的干扰发射的现场测量

This part of CISPR 16 deals with in situ electromagnetic disturbance measurements in any environment from physically large equipment and systems excluding networks. It covers both radiated and conducted emission phenomena, and does not deal with immunity tests. This technical report is intended to be applied primarily to such physically large equipment which are not under the scope of any existing emission standards (as for example CISPR 11 and CISPR 22). It serves only as a guideline on how to deal with emissions of that equipment at the particular location of installation. It does not establish any emission requirements. NOTE 1 Although this technical report is intended to be applied to equipment which is not under the scope of any existing emission standards, it may be used also in such cases in order to serve as additional information for carrying out in situ measurements for any type of large equipment. NOTE 2 Examples of large equipment are: production machines, conveyors, large displays, aircraft simulators, traffic control equipment, etc. Due to the severe impact of the conditions existing at a particular location of operation and the use of the respective large equipment, however, it is not intended to use the measurements in the frame of type testing. NOTE 3 In general, type testing on large equipment is only possible at standardized test sites in a controlled environment. The assessment results obtained under in situ conditions are only valid for the respective individual large equipment actually measured at its particular place of installation. These results cannot be transposed to other equipment of the same type, but installed at other locations. Reference in-situ measurement distances will be given. This allows comparison of the measurement results with limits from existing relevant standards. The frequency range under consideration is from 9 kHz to 18 GHz. Dealing with biological effects on living matter is excluded from this document.

Specification for radio disturbance and immunity measuring apparatus and methods — Part 2-5: In situ measurements of disturbing emissions produced by physically large equipment

ANSI/TIA-1152-2009 对称双绞线电缆的现场测试仪器和测量的要求

This Standard includes requirements for field test instruments that are used to test balanced twisted-pair cabling as specified in the ANSI/TIA-568-C series of structured cabling standards. This Standard specifies the reporting and accuracy performance requirements of field testers for balanced twisted-pair cabling measurements. Level IIe, III, and IIIe field tester requirements are specified in this Standard. This Standard contains methods to compare the field instrument measurements against laboratory equipment measurement specified in ANSI/TIA-568-C.2. Measurement accuracy based upon the assumptions for key performance parameters is addressed.

Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling

GOST R 53373-2009 光谱监控站的自动接收器设备.技术要求和试验方法

Automatic receiver equipment for spectrum monitoring stations. Technical requirements and test methods

KS B ISO 14835-2:2008 机械振动和冲击.末梢血管功能评定用冷刺激试验.第2部分:手指收缩压的测量和评估

이 표준은 다음 사항에 대하여 규정한다.a) 손가락 최고 혈압측정(FSBP/Finger

Mechanical vibration and shock-Cold provocation tests for the assessment of peripheral vascular function-Part 2:Measurement and evaluation of finger systolic blood pressure

JEDEC JEP155-2008 用于人体带电模型/静电放电模型（HBM/MM）限制的电火花检测器（ESD）目标水平推荐规程

The intent of this report is to document and provide critical information to assess and make decisions on safe ESD level requirements. The scope of this document is to provide this information to quality organizations in both semiconductor companies and their IC customers. Special Notes on the System Level ESD: 1. This work and the recommendations therein are intended for Component Level safe ESD requirements and will have little or no effect on system level ESD results. 2. Systems and System boards should continue to be designed to meet appropriate ESD threats regardless of the components in the systems that are meeting the new recommendations from this work, and that all proper system reliability must be assessed through the IEC test method. Special Notes on the Machine Model: 1. The Machine Model (MM) method as specified by some customers and suppliers is not a preferred methodology by JEDEC for use in place of or in addition to HBM and CDM test protocols. 2. In contrast to HBM testers, MM testers are known to have wide variations in output results and thus can give relatively less accurate information from user to user.

Recommended ESD Target Levels for HBM/MM Qualification

KS B ISO 14837-1:2008 机械振动.轨道系统产生的地面噪音和振动.第1部分:一般指南

이 표준은 레일 시스템의 작동에 의해 발생되는 지반 진동과 빌딩 지반 소음의 결과에 대한

Mechanical vibration-Ground-borne noise and vibration arising from rail systems-Part 1:General guidance