M40 电话通信设备 标准查询与下载

IEEE 269-2010 模拟和数字电话机,话筒和听筒传输性能测量的方法

Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets

ANSI/TIA-1083-A-2010 远程通信.电话终端设备.电话听筒.磁性测量规程和性能要求

This standard defines measurement procedures and performance requirements for the handset generated audio band magnetic noise of wireline telephones. A telephone complies with this standard if it meets the requirements in this standard when manufactured and can be expected to continue to meet these requirements when properly used and maintained.

Telecommunications - Telephone Terminal Equipment - Handset - Magnetic Measurement Procedures and Performance Requirements

ANSI/IEEE 269:2010 模拟和数字电话机,手机和听筒传输性能测量的标准方法

This standard provides practical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets and headsets. The methods may also be applicable to a wide variety of other communications equipment, including cordless, wireless and mobile communications devices. Measurement results may be used to evaluate these devices on a standardized basis. Application is in the frequency range from 100 to 8,500 Hz.

Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets

ANSI/IEEE 1329:2010 测量免提电话传输性能的标准方法

This standard provides techniques for objective measurement of electroacoustic and voice switching characteristics of speakerphones that connect directly or indirectly to an analog or digital telephone network. Due to the various characteristics of speakerphones and the environments in which they operate, not all of the test procedures in this standard are applicable to all speakerphones. Application of the test procedures to atypical speakerphones should be determined on an individual basis.

Standard Method for Measuring Transmission Performance of Speakerphones

ANSI/TIA-470-310-D-2010 电信.电话终端设备.无绳电话.距离测量规程

The intent is not to establish minimum range distances but rather, standardize range measurement procedures to allow meaningful comparisons when evaluating products. Several criteria for range performance have been identified, and it is not intended that range performance will be described by a single number or merit. Several performance measurement procedures are established, each of which yields a standardized set of measurement data, that may be used for the comparison of different products.

Telecommunications - Telephone Terminal Equipment - Cordless Telephone - Range Measurement Procedures

SS 546-2009 建筑物内备用电话通信系统的实施规程

This code applies to the planning, design, installation, maintenance and testing of emergency voice communication (EVC) systems in buildings and sets out the requirements for the basic system. Recommended procedures for the use of the system and other information of an advisory nature are given in the Annexes. Section 1 covers General requirements In Section 2, design considerations such as control station. system designs and their operational requirements are covered. Section 3 covers installation and maintenance requirements.

Code of practice for emergency voice communication systems in buildings

YD/T 1394-2009 GSM/CDMA 1×双模数字移动台技术要求

本标准规定了GSM/CDMA 1×双模数字移动台的业务和功能、性能、环境适应性、寿命、电池、充电器、待机时间、通话时间、卡接口、电磁兼容、比吸收率(SAR)、外观、包装和装配以及技术文件和售后服务等方面的技术要求。 本标准适用于支持SIM、UIM和SIM/UIM双模卡的GSM/CDMA 1×双模数字移动台，不适用于机卡一体的GSM/CDMA 1×双模数字移动台。 本标准适用于双模单待机和双模双待机的GSM/CDMA 1×双模数字移动台。

Technical Requirement of GSM/CDMA 1×Dual Mode Digital Mobile Station

YD/T 1889-2009 手柄电话助听器耦合技术要求和测量方法

本标准规定了使用辅助放大、磁场耦合和电耦合等3种助听耦合方式的手柄电话的技术要求和测量方法。 本标准适用于使用助听耦合技术的手柄电话。此外，无绳电话和移动电话的助听器电耦合以及使用头戴机接听的固定电话助听器磁场耦合也可参照本标准相应章节使用。

The Requirements of Hearing Aids Compatibility and Measurement Methods for Telephone Handset

ITU-T P.310-2009 话带(300Hz～3400Hz)数字电话机的传输特性

Recommendation ITU-T P.310 provides audio performance requirements and associated testing methods for narrow-band (300-3400 Hz) digital handset and headset telephones.Requirements and test methods are specified for the major audio transmission parameters including sending and receiving frequency response,loudness rating,noise,distortion,out-of-band signals,linearity,sidetone,echo and delay.This Recommendation is only applicable to digital telephones using encoding conforming to Recommendations ITU-T G.711 (64 kbit/s, PCM) and ITU-T G.726 (32 kbit/s,ADPCM).IP terminals and wireless headsets are not covered in this recommendation.

Transmission characteristics for narrow-band digital handset and headset telephones (Study Group 12)

ANSI/TIA-968-B-2009 电信.电话终端设备.终端设备连接到电话网络的技术要求

This Standard specifies technical criteria for terminal equipment approved inaccordance with Title47 of the U.S.Code of Federal Regulations(47C.F.R.),Part68 for direct connection to the public switched telephone network,including private line services provided over wireline facilities owned by providers of wireline telecommunications.

Telecommunication - Telephone Terminal Equipment - Technical Requirements for Connection of Terminal Equipment to the Telephone Network

ANSI/SCTE 24-2-2009 个人间电缆通信1.0第2部分:使用电缆调制解调器的有线电视网络提供双向音频服务的音频编解码器要求

This standard specifies the audio (voice) codes that are to be used in the provisioning of bi-directional audio services over cable television distribution networks using IP technology (i.e., IPCablecom service). The standard also addresses codec options and packetization issues. Specifically, it identifies the audiocodecs necessary to provide the highest quality and the most resource-efficient service delivery to the customer. Additionally, this document describes a suggested methodology for optimal network support for codecs.

IPCablecom 1.0 Part 2: Audio Codec Requirements for the Provision of Bi-directional Audio Service Over Cable Television Networks Using Cable Modems

ITU-T RESOLUTION 49 FRENCH-2008 枚举

ENUM

REG CAP 413-2008 无线电话手册.第17版

The aim of the United Kingdom Radiotelephony Manual (CAP 413) is to provide pilots and Air Traffic Services personnel with a compendium of clear, concise, standardised phraseology and associated guidance, for radiotelephony communication in United Kingdom airspace. Radiotelephony (RTF) communications between United Kingdom air traffic services units and pilots are expected to comply with the phraseology described in this manual. Operational details can be found in the United Kingdom Aeronautical Information Publication (UK AIP). Phraseology for air traffic controllers (consistent with CAP 413) is also published in the Manual of Air Traffic Services (CAP 493). CAP 413 is also a useful reference for those studying for the UK Flight Radiotelephony Operator's Licence. Candidates for JAA pilot and instrument rating examinations should note that the syllabus for the communications examination is drawn directly from the International Civil Aviation Organisation (ICAO) Annex 10 Volume 2 and ICAO Doc 9432-AN/925 and not CAP 413.

Radiotelephony Manual Edition 17

ITU-T J.460.4-2008 个人间电缆通信(IPCablecom)2住宅会话初始协议(SIP)电话:嵌入式用户设备配置规范.9号研究组

This Recommendation specifies how the IPCablecom2 E-UE Provisioning Framework can be used to configure and manage Embedded UEs (E-UEs) supporting the IPCablecom2 Residential SIP Telephony (RST) application.

IPCablecom2 residential SIP telephony: Embedded-user equipment provisioning specification Study Group 9

ITU-T J.460.2-2008 装入数字声音适配器(E-DVA)的IPCablecom 2住宅SIP电话规范

This Recommendation defines the embedded Digital Voice Adaptor (E-DVA) requirements for the analog interface and for powering of the E-DVA. An embedded DVA is a DOCSIS cable modem (CM) integrated with a IPCablecom2 DVA. The purpose of this Recommendation is to define a set of requirements that will enable a sufficiently reliable service to meet assumed consumer expectations related to residential telephony. These assumed expectations include constant availability, including availability during power failure at the customer’s premise, and access to emergency services (e.g. 121 or 911.). It is an important objective of this work that interoperability between IPCablecom 2.0 and 3GPP IMS is provided. IPCablecom 2.0 is based upon 3GPP IMS, but includes additional functionality necessary to meet the requirements of cable operators. Recognizing developing converged solutions for wireless, wireline, and cable, it is expected that further development of IPCablecom 2.0 will continue to monitor and contribute to IMS developments in 3GPP, with the aim of alignment of 3GPP IMS and IPCablecom 2.0. Note – The structure and content of this Recommendation have been organized for ease of use by those familiar with the original source material; as such, the usual style of ITU-T recommendation has not been applied.

IPCablecom2 residential SIP telephony: embedded digital voice adapter (E-DVA) specification Study Group 9

ITU-T J.460.0-2008 IPCablecom2住宅SIP电话特性定义

The IPCablecom2 Residential SIP Telephony effort is intended to replicate many of the residential features currently available on the public switched telephone network (PSTN), except that the features operate using a IPCablecom2-based IP (Internet Protocol) network using SIP (Session Initiation Protocol) for VoIP (voice over IP) sessions. The IPCablecom2 Residential SIP Telephony features described in this document are intended to form the basis for specification requirements that define the behavior of SIP clients that interact with the IPCablecom2 network and the corresponding network behavior. This Recommendation describes the behaviour of residential telephony features using a standard RST Client (called RST User Equipment, or RST UE, or simply UE in this document) connected to the IPCablecom2 network. Prior IPCablecom efforts have defined residential telephony capabilities that operate on an IPCablecom IP network. IPCablecom defined an MGCP-based (Media Gateway Control Protocol) architecture in which a centralized Call Management Server (CMS) controls the telephony services provided by MTAs (Multimedia Terminal Adapters). The IPCablecom2 Residential SIP Telephony specification defines how UEs can support residential telephony capabilities similar to that of IPCablecom. This allows for the deployment of new types of clients and services while maintaining continuity with existing residential telephony services. This Recommendation is the overview document describing basic telephony features to be supported in SIP. It is an important objective of this work that interoperability between IPCablecom 2.0 and 3GPP IMS is provided. IPCablecom 2.0 is based upon 3GPP IMS, but includes additional functionality necessary to meet the requirements of cable operators. Recognizing developing converged solutions for wireless, wireline, and cable, it is expected that further development of IPCablecom 2.0 will continue to monitor and contribute to IMS developments in 3GPP, with the aim of alignment of 3GPP IMS and IPCablecom 2.0. Note – The structure and content of this Recommendation have been organized for ease of use by those familiar with the original source material; as such, the usual style of ITU-T recommendation has not been applied.

IPCablecom2 residential SIP telephony: Feature definition Study Group 9

YD/T 950-2008 电信中心内通信设备的过电压过电流抗力要求及试验方法

本标准规定了安装在电信中心内的通信设备的各类端口过电压过电流抗力、静电放电的技术要求、试验方法及试验结果评定。 本标准适用于所有安装在电信中心内的通信设备，如局用交换设备、数据设备、传输设备、无线设备、网管设备等的过电压过电流防护性能的检验。

Technical Specification and Testing Methods for Resistibility of Telecommunication Equipment Installed in a Communications Centre to Overvoltages and Overcurrents

FCC 47 CFR PT 68-2007 第68部分.电话通信网终端设备连接

The purpose of the rules and regulations in this part is to provide for uniform standards for the protection of the telephone network from harms caused by the connection of terminal equipment and associated wiring thereto, and for the compatibility of hearing aids and telephones so as to ensure that persons with hearing aids have reasonable access to the telephone network. (47 U.S.C. 151, 154(i), 154(j), 201–205, 218, 220, 313, 403, 412, and 5 U.S.C. 553) [49 FR 21733, May 23, 1984] (a) Except as provided in paragraphs (b) and (c) of this section, the rules and regulations apply to direct connection of all terminal equipment to the public switched telephone network for use in conjunction with all services other than party line services. (b) National defense and security. Where the Secretary of Defense or authorized agent or the head of any other governmental department, agency, or administration (approved in writing by the Commission to act pursuant to this rule) or authorized representative, certifies in writing to the appropriate common carrier that compliance with the provisions of part 68 could result in the disclosure of communications equipment or security devices, locations, uses, personnel, or activity which would adversely affect the national defense and security, such equipment or security devices may be connected to the telephone company provided communications network without compliance with this part, provided that each written certification states that: (1) The connection is required in the interest of national defense and security; (2) The equipment or device to be connected either complies with the technical criteria pertaining thereto or will not cause harm to the nationwide telephone network or to employees of any provider of wireline telecommunications; and (3) The installation is performed by well trained, qualified employees under the responsible supervision and control of a person who is a licensed professional engineer in the jurisdiction in which the installation is performed. (c) Governmental departments, agencies, or administrations that wish to qualify for interconnection of equipment or security devices pursuant to this section shall file a request with the Secretary of this Commission stating the reasons why the exemption is requested. A list of these departments, agencies, or administrations that have filed requests shall be published in the FEDERAL REGISTER. The Commission may take action with respect to those requests 30 days after publication. The Commission action shall be published in the FEDERAL REGISTER. However, the Commission may grant, on less than the normal notice period or without notice, special temporary authority, not to exceed 90 days, for governmental departments, agencies, or administrations that wish to qualify for interconnection of equipment or security devices pursuant to this section. Requests for such authority shall state the particular fact and circumstances why authority should be granted on less than the normal notice period or without notice. In such cases, the Commission shall endeavor to publish its disposition as promptly as possible in the FEDERAL REGISTER. [66 FR 7580, Jan. 24, 2001]

PART 68—CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK

YD/T 1686-2007 IP电话终端设备语音质量及传输性能技术要求和测试方法

本标准规定了IP电话终端设备传输性能的技术要求和测试方法，并给出语音质量建议。 本标准适用于固定和移动的窄带(300～3 400Hz)IP电话终端设备，包括IP电话、IP电话网关、无线接入IP电话、无线IP电话、IP视讯会议终端、IAD以及软电话等。

Speech Quality and Transmission Performance Requirements and Testing Methods for IP Telephony Terminal Equipment

SN/T 1429.7-2007 进出口信息技术设备检验规程 第7部分:有线电话机

SN/T 1429 的本部分规定了进出口有线电话机的要求、抽样、检验及检验结果的判定。 本部分适用于接入公用电信网，具有发送和接收信息功能的有线电话机（含普通电话机、主叫号码显示电话机、卡式管理电话机、录音电话机、投币电话机、智能卡式电话机、IC公用电话机、数字电话机等）的检验。本部分不适用于带有可视和传真等特殊用途的有线电话机的检验。

Rules for the inspection of information technology equipment for import and export.Part 7: Cord telephone