M61 广播、电视系统 标准查询与下载

ETSI TS 102 772-2010 数字视频广播(DVB).多协议封装-突发间的前向纠错(MPE-iFEC)规范(版本1.1.1)

Digital Video Broadcasting (DVB); Specification of Multi-Protocol Encapsulation - inter-burst Forward Error Correction (MPE-iFEC) (V1.1.1)

NF Z86-592:2010 数字视频广播(DVB). 数据广播用DVB规范(V1.5.1).

Digital Video Broadcasting (DVB) - DVB specification for data broadcasting (V1.5.1).

GY/T 244-2010 广播电视数字微波传输电路运行维护规程

本标准规定了广播电视数字微波传输电路的运行、维护及管理等工作要求。本标准适用于广播电视传输用数字微波干线电路、支线电路的运行维护和管理。

Operation and maintenance regulation of digital microwave transmission link for radio and TV

ETSI TS 102 991-2010 数字视频广播(DVB).第2代数字电缆传输系统(DVB-C2)实施指南(版本1.1.1)

Digital Video Broadcasting (DVB); Implementation Guidelines for a second generation digital cable transmission system (DVB-C2) V1.1.1

DIN EN 301192:2010 数字视频广播(DVB).数据广播用DVB规范(英文版本EN 301192 V1.5.1 (2009-11)核准本作为德国标准)

Digital Video Broadcasting (DVB) - DVB specification for data broadcasting (Endorsement of the English version EN 301192 V1.5.1 (2009-11) as German standard)

BS EN 60728-13:2010 电视信号,声音信号和交互式服务用电缆网络.广播信号传输用光学系统

This part of IEC 60728 is applicable to optical transmission system for broadcast signal transmission that consists of a head-end equipment, optical transmission lines, in-house wirings and a system outlet. The system is primarily intended for television and sound signals using analogue and/or digital transmission technology. This standard specifies the basic system parameters and methods of measurement for optical distribution system having a system outlet in order to assess the system performance and its performance limits. The purpose of this part of IEC 60728 is to describe the system specification of FTTH (fibre to the home) network for broadcast signal transmission. This standard is also applicable to the broadcast signal transmission using telecommunication network if it satisfies the optical portion of this standard. This standard describes RF transmission for broadcast and narrowcast (limited area distribution of broadcast) signals over FTTH, and introduces xPON system as a physical layer media. The detailed description of physical layer is out of the scope of this standard. The scope is limited to RF signal transmission over FTTH, thus, it does not include IP transport technologies, such as IP Multicast and associate protocols. Some interference descriptions between telecommunication system and broadcast system addressed in Clause 7 and Annex D should be referred to for detailed explanations. Annex A describes actual service systems with design consideration based on this standard. Annex B gives an overview of the optical transmission systems applicable for broadcast signal transmission.

Cable networks for television signals, sound signals and interactive services - Optical systems for broadcast signal transmissions

BS 8418:2010 运行中的CCTV系统探测器的安装和遥控监测.实施规程

This British Standard gives recommendations for the design, installation, commissioning, operation and remote monitoring of detector-activated CCTV systems. This standard is intended to provide recommendations to the following parties: a) installers and maintenance providers on best practice for the design, installation, commissioning and operation of detector?activated CCTV systems; NOTE This includes the installation and maintenance engineers working for the installers and maintenance providers. b) remote video response centres (RVRCs) monitoring CCTV systems; and c) owners and users regarding the management of CCTV systems.

Installation and remote monitoring of detector-activated CCTV systems - Code of practice

BS EN 60728-1-1:2010 电视信号,声音信号和交互式服务用电缆网络.双向家用网络用射频(RF)电缆

This part of IEC 60728 provides the requirements and describes the implementation guidelines of RF cabling for two-way home networks; it is applicable to any home network that distributes signals provided by CATV/MATV/SMATV cable networks (including individual receiving systems) having a coaxial cable output. It is also applicable to home networks where some part of the distribution network uses wireless links, for example in place of the receiver cord. This part of IEC 60728 is therefore applicable to RF cabling for two-way home networks with wired cords or wireless links inside a room and primarily intended for television and sound signals operating between about 5 MHz and 3 000 MHz. The frequency range is extended to 6 000 MHz for distribution techniques that replace wired cords with a wireless two-way communication inside a room (or a small number of adjacent rooms) that uses the 5 GHz to 6 GHz band. In a building divided into apartment blocks, the distribution of the signals inside the home starts from the home network interface (HNI) up to the system outlet or terminal input. The requirements at the system outlet are given in IEC 60728-1, Clause 5 and the requirements at the HNI are given in IEC 60728-1, Clause 7. In Clause 5 of this standard additional requirements are given. This standard deals with various possibilities to distribute signals in a home network, using coaxial cables, balanced pair cables, fibre optic cables (glass or plastic) and also wireless links inside a room (or a small number of adjacent rooms) to replace wired cords. This standard gives references to basic methods of measurement of the operational characteristics of the home cable network in order to assess its performance. All requirements refer to the performance limits, which are obtained between the input(s) at the home network interface (HNI) and the output at any system outlet when terminated in a resistance equal to the nominal load impedance of the system, unless otherwise specified. Where system outlets are not used, the above applies to the terminal input. Clause 5 defines the performance limits measured at system outlet or terminal input for an unimpaired (ideal) test signal applied at the HNI. Under normal operating conditions for any analogue channel and meeting these limits, the cumulative effect of the impairment of any single parameter at the HNI and that due to the home network will produce picture and sound signals not worse than Grade four on the five-grade impairment scale contained in ITU-R BT.500. These requirements are given in IEC 60728-1-2. For digitally modulated signals the quality requirement is a QEF (Quasi Error Free) reception. This standard describes the physical layer connection for home networks. Description of protocols required for Layer 2 and higher layers is out of the scope of this standard. Logical connections between devices within the home network are therefore not always guaranteed.

Cable networks for television signals, sound signals and interactive services. RF cabling for two way home networks

GY/T 243-2010 标准清晰度电视数字视频通道技术要求和测量方法

本标准规定了电视中心标准清晰度电视数字视频通道的技术要求和测量方法。对于能够确保同样测量不确定度的任何等效测量方法也可以采用。有争议时，应以本标准为准。本标准适用于电视中心制作、转播、播控环节的标准清晰度电视数字视频系统的设计、建设、维护和验收，其他相关设备和系统的设计、生产、维护、验收和运营可以参照本标准。

Specifications and methods of measurement on standard definition digital video channel

ETSI TS 102 822-3-2-2010 广播和在线业务.有关个人存储系统的内容的搜寻,选择和正确使用(“TV-Anytime”).第3部分:元数据.第2子部分:单向环境的系统方面(版本1.6.1)

Broadcast and On-line Services: Search, select, and rightful use of content on personal storage systems ("TV-Anytime"); Part 3: Metadata; Sub-part 2: System aspects in a uni-directional environment (V1.6.1)

ETSI TS 102 542-4-2010 数字视频广播(DVB).DVB-IPTV第1阶段规范的实施指南.第4部分:远程管理和固件升级(版本1.3.1)

Digital Video Broadcasting (DVB); Guidelines for the implementation of DVB-IPTV Phase 1 specifications; Part 4: Remote Management and Firmware Update (V1.3.1)

ETSI TS 102 563-2010 数字音频广播(DAB).高级音频编码(AAC)声音的传输(版本1.2.1)

Digital Audio Broadcasting (DAB); Transport of Advanced Audio Coding (AAC) audio (V1.2.1)

ETSI TS 102 905-2010 数字视频广播(DVB).家庭网络第1阶段中DVB业务的技术规范(版本1.1.1)

Digital Video Broadcasting (DVB); Technical Specification for DVB Services in the Home Network Phase 1 (V1.1.1)

IEC 62106:2009/COR1:2010 频率范围为87.5-108.0 MHz的VHF/FM有声广播用无线电数据系统(RDS)的规范

Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz

BS EN 60728-7-3:2009 电视和声音信号用电缆分线系统.混合光纤同轴电缆外部设备状况监测.电力变换器接口总线(PSTIB)

This part of IEC 60728 specifies requirements for the Hybrid Fibre Coax (HFC) Outside Plant (OSP) Power Supplies (PS). This standard is part of a series developed to support the design and implementation of interoperable management systems for evolving HFC cable networks. The purpose of the standards is to support the design and implementation of interoperable management systems for evolving HFC cable networks. The Power Supply to Transponder Interface Bus (PSTIB) specification describes the physical (PHY) interface and related messaging and protocols implemented at the Data Link Layer (DLL), layers 1 and 2 respectively in the 7-layer ISO-OSI reference model, that support communications between compliant transponders and the managed OSP power supplies and other related power equipment to which they interface. This standard describes the PSTIB PHY and DLL layer requirements and protocols that shall be implemented to support reliable communications between all type 2 and type 3 compliant OSP transponders on the HFC plant and managed OSP power supplies and related hardware. Any exceptions to compliance with this standard will be specifically noted as necessary. Transponder type classifications referenced within the HMS series of standards are defined in Table 1.

Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB)

BS EN 62106:2009 频率范围为87.5～108.0 MHz的VHF/FM声音广播用无线电数据系统(RDS)的规范

This International Standard describes the Radio Data System, RDS, intended for application to VHF/FM sound broadcasts in the range 87,5 MHz to 108,0 MHz which may carry either stereophonic (pilot-tone system) or monophonic programmes ( see clause 2 – Normative references ITU-R Recommendations BS 450-3 and BS 643-2). The main objectives of RDS are to enable improved functionality for FM receivers and to make them more user-friendly by using features such as Programme Identification, Programme Service name display and where applicable, automatic tuning for portable and car radios, in particular. The relevant basic tuning and switching information therefore has to be implemented by the type 0 group (see 6.1.5.1), and it is not optional unlike many of the other possible features in RDS.

Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz

ETSI EN 300 468-2010 数字视频广播(DVB).数字电视广播系统(DVB)中的业务信息(SI)规范(版本1.11.1)

Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB systems V1.11.1

ETSI TS 102 539-2010 数字视频广播(DVB).互联网协议(IP)上的宽带内容指南(BCG)信息的传送(版本1.3.1)

Digital Video Broadcasting (DVB); Carriage of Broadband Content Guide (BCG) information over Internet Protocol (IP) (V1.3.1)

ETSI EN 302 769-2010 数字视频广播(DVB).电缆系统第2代数字传输系统(DVB-C2)的帧结构信道编码和调制(版本1.1.1)

Digital Video Broadcasting (DVB); Frame structure channel coding and modulation for a second generation digital transmission system for cable systems (DVB-C2) V1.1.1

ITU-R BT.1299-1 SPANISH-2010 世界通用数字地面电视广播系统系列的基本要素

This Recommendation describes principles of the common elements,including baseband source coding, multiplexing,and modulation and channel coding,for digital terrestrial television broadcasting systems.

The basic elements of a worldwide common family of systems for digital terrestrial television broadcasting