M82 邮政机械设备 标准查询与下载

DB12/T 607-2015 智能邮件快件箱

本标准适用于智能邮件快件箱的生产和检验。

Smart Mail Express Box

ANSI MH10.8.8-2011 包裹,小包裹和平邮的无线电频率识别

Radio Frequency Identification for Packages, Parcels, and Flat Mail

YZ/T 0114-2006 滑块式包件分拣机

Slider Package Sorter

YZ/T 0117-2005 信函分拣系统安装工程质量检验评定标准

Quality inspection and evaluation standard for letter sorting system installation project

YZ/T 0113-2005 红框理信机

本标准规定了红框理信机的术语和定义、设备型号及代码、基本组成与结构要求、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于红框理信机的设计、制造、检验、使用及维护。

Red frame letter facing machine

YZ/T 0112-2005 自动识别视频补码信函分拣机

本标准规定了自动识别视屏补码信函分拣机的术语和定义、设备型号与代码、基本组成与结构要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于自动识别视屏补码信函分拣机的设计、制造、检验、使用及维护。

OCR video coding letter sorting machine

YZ/T 0111-2005 托盘式、交叉带式包件分拣机

本标准规定了托盘式、交叉带式包件分拣机的分类、型号和代码，设备组成，主要结构参数，技术要求，试验方法，检验规则以及标志、包装、运输和贮存等。 本标准适用于托盘式、交叉带式包件分拣机设计、制造、检验、使用与维护。

Tray and crossing-belt parcel sorting machines

YZ/T 0120-2005 邮政推式悬挂输送机

本标准规定了邮政推式悬挂输送机的型号及代码、主要结构参数设备组成、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于独轮夹钳小车封闭轨推式悬挂输送机(以下简称“推挂机”)设计、制造、检验、使用与维护。用于邮政的其他类型推挂机及悬挂机也可参照使用。

Postal power and free conveyor

DIN CEN/TS 14631:2005 邮政服务.容器和包装物的自动鉴别.容器资产编号

Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering; German version CEN/TS 14631:2005

YZ/T 0109-2004 设计用邮政设备和用品用具图形符号

Graphic symbols for postal equipment and supplies utensils for design

DIN CEN/TS 14826:2004 邮政服务.邮件的自动识别.机读数字邮政标记的二维条形码符号打印质量规范

The standard will provide a methodology for the objective measurement of the print quality of machine readable digital postage marks.

Postal services - Automatic identification of items - Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks; English version CEN/TS 14826:2004

YZ/T 0090.4-2004 邮政生产设备分类与编码规则.第4部分:生产辅助设备

Classification and coding rules of postal production equipment Part 4:Production auxiliarg equipment

YZ/T 0097-2003 邮政通信设备安装工程验收规范.第十册.信盒处理系统

Code for acceptance of postal equipment installation project volume 10 the letter tray conveyance system

YZ/T 0091-2003 装卸过桥技术条件

Technical conditions for loading and unloading bridges

YZ/T 0095-2003 分体型厢式邮政汽车技术条件

Specifications for Split Van Postal Vehicles

BS DD CEN/TS 14482:2003 邮政服务设施.国际文字邮件格(盘).试验方法和性能要求

This Technical Specification specifies the performance requirements and testing methods for standard letter mail trays, as specified in classification 1.1. The trays should be used to facilitate the exchange of international mail. The technical specification of the trays shall be such that the performance requirements specified herein shall be met and tests specified herein successfully completed. The technical specifications of trays as such however, are beyond the scope of this Technical Specification.

Postal services. Trays for international letter mail. Test methods and performance requirements

BS EN 13619:2002 邮政服务.邮件处理.处理信件的光学特征

This European Standard specifies optical characteristics for processing letters and gives guidelines on the values of these attributes that will assure a high level of address readability. It is aimed at facilitating relations between Postal Operators and Customers by providing information that mailers can use to ensure that the addresses they print can be processed successfully by postal automation systems. The standard is intended to support: ¾assessment of the probable readability of a printed address, using given address recognition equipment, without actually submitting it to the equipment; ¾determination of the changes in address printing characteristics that are required to achieve a desired level of address readability using given address recognition equipment; ¾assessment of the complexity, and thus the cost, of the address recognition equipment needed to achieve a desired level of readability of addresses with given printing characteristics. The standard applies to mail items whose size is up to and including C51, but may also be applied to oversize items, commonly referred to as C5+, and to flats. The address blocks covered are: ¾the delivery address block; ¾the sender address block if this is printed on the same side of the mail item as the delivery address block. The guidelines provided in the standard apply to address blocks as they appear on finished mail items when submitted to postal operators, and not just to addresses and the substrate on which they are printed. Users of the standard are responsible for determining the physical parameters which are required to achieve compliance after taking account of characteristics which result from mail item features, other than printing, such as covering, the use of transparent window envelopes and the use of address labels. The guidelines are based on physical attributes that tend to influence the readability of addresses by optical character recognition (OCR) equipment and by video-coders. To the extent that this is possible, attributes have been selected so as to be easily controllable and to be measurable using simple, low-cost, means. The attribute values given are based on common notions of typography and on colour reference systems that are likely to be known by mailers. The values given should be interpreted as recommendations or guidelines, not as strict, mandatory, all-or-nothing rules. OCR systems are complex and their behaviour is therefore not easily modelled by simple attributes. As a result the ambition of the standard is limited by the difficulty of defining some attributes in formal terms, even though their influence on address readability has been proven. Where this is the case, the standard uses examples, lists of preferred values, or literal descriptions to give hints on how to maximise address readability. Since all attributes do not contribute uniformly to the readability of an address, the standard identifies two levels of salience for each attribute (high and normal). These two levels are designed to aid in the definition of readability classes by users of the standard. This standard considers a printed address as being made up of a series of lines of printed information2. Guidelines related to such address lines are relevant for all lines in an address block.

Postal services - Mail item processing - Optical characteristics for processing letters

YZ/T 0067-2002 信筒

Pillar box

YZ/T 0070-2002 扁平件分拣机安装工程质量检验评定标准

Standards for Quality Inspection and Evaluation of Flat Parts Sorter Installation Engineering

YZ/T 0069-2002 包件分拣机安装工程质量检验评定标准

The check and evaluate standard for quality of parcel sorting machine installation engineering