N18 工业控制机与计算技术应用装置 标准查询与下载
共找到 1749 条与 工业控制机与计算技术应用装置 相关的标准，共 117 页
"General This part of IEC 61158 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term ""time-critical"" is used to represent the presence of a time-window@ within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions@ with attendant risk to equipment@ plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the Type 12 fieldbus data-link layer in terms of a) the primitive actions and events of the service; b) the parameters associated with each primitive action and event@ and the form which they take; c) the interrelationship between these actions and events@ and their valid sequences. The purpose of this standard is to define the services provided to the Type 12 fieldbus application layer at the boundary between the application and datalink layers of the fieldbus reference model; systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. Specifications The principal objective of this standard is to specify the characteristics of conceptual data-link layer services suitable for time-critical communications@ and thus supplement the OSI Basic Reference Model in guiding the development of data-link protocols for time-critical communications. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. This specification may be used as the basis for formal DL-Programming-Interfaces. Nevertheless@ it is not a formal programming interface@ and any such interface will need to address implementation issues not covered by this specification@ including a) the sizes and octet ordering of various multi-octet service parameters@ and b) the correlation of paired request and confirm@ or indication and response@ primitives. Conformance This standard does not specify individual implementations or products@ nor does it constrain the implementations of data-link entities within industrial automation systems. There is no conformance of equipment to this data-link layer service definition standard. Instead@ conformance is achieved through implementation of the corresponding data-link protocol that fulfils the Type 12 data-link layer services defined in this standard."
Industrial communication networks - Fieldbus specifications - Part 3-12: Data link layer service definition - Type 12 elements
- ICS
- 25.040.40;35.100.20;35.110;35.160
- CCS
- N18
- 发布
- 2014-08-01
- 实施
- 2019-04-26
Industrial automation systems and integration - Product data representation and exchange - Part 1636: Application module: Assembly module design
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1650: Application module: Bare die
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1642: Application module: Assembly module usage view
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1051: Application module: Geometric tolerance
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1127: Application module: File identification
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 410: Application module: AP210 electronic assembly interconnect and packaging design
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1142: Application module: Requirement view definition relationship
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1603: Application module: Analytical model
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1698: Application module: Layered interconnect module design
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1686: Application module: Interconnect module usage view
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1707: Application module: Package
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1718: Application module: Layered interconnect simple template
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 1706: Application module: Non feature shape element
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-08
- 实施
Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
- ICS
- 35.100.20;35.160;35.240.50
- CCS
- N18
- 发布
- 2014-07-01
- 实施
This part of IEC 61158 specifies the requirements for fieldbus component parts. It also specifies the media and network configuration requirements necessary to ensure agreed levels of a) data integrity before data-link layer error checking; b) interoperability between devices at the physical layer. The fieldbus physical layer conforms to layer 1 of the OSI 7-layer model as defined by ISO 7498 with the exception that@ for some types@ frame delimiters are in the physical layer while for other types they are in the data-link layer.
Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
- ICS
- 25.040.01;35.100.10;35.160;35.240.50
- CCS
- N18
- 发布
- 2014-07-01
- 实施
- 2014-07-19
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Generic structures (IEC 61987-11:2012); German version EN 6
- ICS
- 35.240.50
- CCS
- N18
- 发布
- 2014-07
- 实施
Programmable controllers - Part 3: Programming languages (IEC 61131-3:2013); German version EN 61131-3:2013
- ICS
- 25.040.40;35.060;35.080;35.240.50
- CCS
- N18
- 发布
- 2014-06-01
- 实施
Industrial process control systems - Guideline for evaluating process control systems part 1: Specifications
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-05-01
- 实施
Industrial automation systems and integration - Product data representation and exchange - Part 101: Integrated application resource: Draughting
- ICS
- 25.040.40;35.240.50
- CCS
- N18
- 发布
- 2014-05
- 实施
