N46 照相机与照相器具 标准查询与下载

ISO 2721:2013 摄影术.使用胶卷的照相机.曝光自动控制

This International Standard specifies the exposure at the focal plane of film-based cameras for values of two exposure parameters, i.e. field luminance and film speed, and also describes methods of evaluating other photometric characteristics, such as the acceptance angles of the photoelectric system. This International Standard applies to automatic exposure control systems which are built into filmbased cameras or coupled with them to regulate the exposure in the focal plane as a function of the several exposure parameters. The mechanism can control either the focal-plane illuminance or the exposure-time interval or both. Pointer (or needle) matching systems are included in this International Standard even though they are not fully automatic. This standard is not applicable to digital cameras.

Photography - Film-based cameras - Automatic controls of exposure

ISO 15781:2013 摄影.数码相机.摄影时间延迟,快门释放时间延迟,摄影速度和启动时间测量

Photography - Digital still cameras - Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time

BS ISO 17321-1:2012 图形技术和摄影技术.数码相机(DSCs)的色彩特性.闪光、计量和试验规程

Graphic technology and photography. Colour characterisation of digital still cameras (DSCs). Stimuli, metrology and test procedures

ISO/TR 17321-2:2012 图像和摄影技术.数字照相机色彩特征描述(DSCs).第2部分:场景分析变形测定的注意事项

Graphic technology and photography - Colour characterization of digital still cameras (DSCs) - Part 2: Considerations for determining scene analysis transforms

DB35/T 1275-2012 数码相框技术要求和测试方法

本标准规定了数码相框的术语和定义、技术要求及试验方法。 本标准适用于数码相框（以下简称产品）的设计、生产和检验等。

Digital photo frame technical requirements and test methods

DIN SPEC 15707:2012 数码相机的可靠性试验指南

Guide for reliable testing of digital cameras

BS ISO 12231:2012 摄影.电子照相机.词汇

Photography. Electronic still picture imaging. Vocabulary

IEEE 1680.2-2012 成像设备环境评估的IEEE标准

IEEE Standard for Environmental Assessment of Imaging Equipment

KS A ISO 1222:2011 摄影.三脚架链接部

이 표준은 카메라와 삼각대 혹은 다른 부속품들 사이에서 사용되는 나사 연결부에 대해서 기술

Photography-Tripod connections

KS A ISO 14524:2011 摄影.电子式静止影像照相机.光电变换函数测定方法(OECFs)

이 표준은 전자식 정지 영상 카메라의 광전 변환함수(OECF)를 측정하는 방법에 대해 정의

Potography－Electronic still-picture carmeras－Methods for measuring opto-electronic conversion functions(OECFs)

HJ 2504-2011 环境标志产品技术要求 照相机

本标准规定了照相机环境标志产品的术语和定义、基本要求、技术内容和检验方法。 本标准适用于照相机,不包括具有拍照功能的移动电话及其他设备。

Technical requirement for environmental labeling products -Camera

ASTM E2699-11 数字射线照相(DR)试验方法用无损评估(DICONDE)中的数字成像和通信的标准操作规程

Personnel that are responsible for the creation, transfer, and storage of digital X-ray test results will use this standard. This practice defines a set of information modules that along with Practice E2339 and the DICOM standard provide a standard means to organize digital X-ray test parameters and results. The digital X-ray test results may be displayed and analyzed on any device that conforms to this standard. Personnel wishing to view any digital X-ray inspection data stored according to Practice E2339 may use this document to help them decode and display the data contained in the DICONDE-compliant inspection record.1.1 This practice facilitates the interoperability of digital X-ray imaging equipment by specifying image data transfer and archival methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitions, information modules and a data dictionary that are specific to digital X-ray test methods. 1.2 This practice has been developed to overcome the issues that arise when analyzing or archiving data from digital X-ray test equipment using proprietary data transfer and storage methods. As digital technologies evolve, data must remain decipherable through the use of open, industry-wide methods for data transfer and archival storage. This practice defines a method where all the digital X-ray technique parameters and test results are communicated and stored in a standard manner regardless of changes in digital technology. 1.3 This practice does not specify: 1.3.1 A testing or validation procedure to assess an implementation's conformance to the standard. 1.3.2 The implementation details of any features of the standard on a device claiming conformance. 1.3.3 The overall set of features and functions to be expected from a system implemented by integrating a group of devices each claiming DICONDE conformance. 1.4 Although this practice contains no values that require units, it does describe methods to store and communicate data that do require units to be properly interpreted. The SI units required by this practice are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicab......

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

SN/T 0900-2010 进出口照相机检验规程

本标准规定了对进出口照相机的技术要求、检验及结果判定。 本标准适用于民用小型照相机的进出口检验，不适用于数码照相机、专用照相机、一步成像照相机、座式照相机和一次性照相机及简易礼品照相机的进出口检验。

Rules for the inspection of cameras for import and export

GJB 7083-2010 航空机载CCD相机通用规范

General specification for aviation airborne CCD camera

BS ISO 1754:2010 摄影术.使用35 mm胶片和胶卷的照相机.画面尺寸规格

Photography - Cameras using 35 mm film and roll film - Dimensions of picture sizes

BS ISO 1222:2010 摄影术.三脚架连接件

Photography - Tripod connections

ISO 1222:2010 摄影.三角架连接

This International Standard specifies the screw connections used between a camera and a tripod or other accessories.

Photography - Tripod connections

ISO 1754:2010 摄影术.使用35 mm胶片和胶卷的照相机.画面尺寸规格

This International Standard specifies the dimensions on the film of still picture sizes made with cameras in which the image dimensions are defined by the camera frame. Panoramic image dimensions (13 mm* 36 mm) of cameras featuring a mid-roll panoramic photo are not specified in this International Standard.

Photography - Cameras using 35 mm film and roll film - Dimensions of picture sizes

JB/T 10362-2010 数码照相机

本标准规定了数码照相机的术语和定义、要求、试验方法、标志、使用说明、包装、运输和贮存。 本标准适用于便携式数码照相机、座式和专用数码照相机。带有拍照功能的手机、DV产品以及具有数码照相功能等器械的静态图像的测试方法也可参照使用该标准。

Digital camera

ASTM E2003-10 中子射线照相束纯度指示仪制造的标准实施规程

The BPI is designed to yield quantitative information concerning neutron beam and image system parameters that contribute to film exposure and, thereby, affect overall image quality. For proper measurements of film exposure due to the neutron beam constituents, the BPI must be fabricated in accordance with this practice. This practice shall be followed for the fabrication of all Beam Purity Indicators to be used with Method E545 to determine image quality in direct thermal neutron radiography.1.1 This practice covers the material and fabrication of a Beam Purity Indicator (BPI), which can be used to determine the relative quality of radiographic images produced by direct, thermal neutron radiographic examination. 1.2 The values stated in SI units are regarded to be standard. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators