N64 实验室用玻璃、陶瓷、塑料器皿 标准查询与下载

JIS R 3646:1997 可互换式锥形玻璃磨口接头

この規格は，化学分析用ガラス器具の共通テーバーすり接手(以下，共通テーバーすり接手という。)について規定する。

Interchangeable conical glass ground joints

JIS R 3651:1997 可互换式球面磨口玻璃接头

この規格は，化学分析用ガラス器具の共通球面すり接手(以下，共通球面すり接手という。)について規定する。

Interchangeable spherical ground glass joints

BS 2734:1997 窄颈沸腾烧瓶规范

This International Standard specifies requirements and dimensions for an internationally acceptable series of conical flasks and of flat-bottom and round-bottom flasks for general laboratory purposes. The flasks are provided for - direct use in a laboratory, fitting together with other equipment for general laboratory purposes; - further work up to other products. NOTE —Annex A lists additional International Standards for other general-purpose laboratory glassware.

Specification for narrow-necked boiling flasks

BS 1751:1997 实验室玻璃器皿 一般用途直孔玻璃旋塞规范

Six sizes with bores from 1mm to 10 mm.

Laboratory glassware. Specification for straight-bore glass stopcocks for general purposes

BS ISO 4798:1997 实验室玻璃器皿.过滤器漏斗

This International Standard specifies requirements and dimensions for glass filter funnels suitable for general laboratory purposes, fitting together with other general-use glassware such as boiling flasks and volumetric flasks. NOTE — Annex A lists additional International Standards for other general-purpose laboratory glassware.

Laboratory glassware - Filter funnels

BS ISO 12772:1997 实验室玻璃器皿.可处理式微血球容积计毛细管

This International Standard provides details for two types of disposable glass capillary tubes, suitable for the microhaematocrit test and other analytical tests which include a separation of plasma and cells. The details specified are in conformity with ISO 8417, to the greatest possible extent. WARNING —Capillary tubes can break during the analytical test procedure, resulting in broken sharp glass, blood spillage and aerosols. Appropriate precautions shall be taken to avoid dangerous infections.

Laboratory glassware - Disposable microhaematocrit capillary tubes

QB/T 2296-1997 培养皿

本标准规定培养皿的产品规格尺寸、技术要求、试验方法、检验规则和标志、包装、运翰、贮存。 本标准适用于生物化学、医药卫生、科研单位进行细菌培养和生物检定用的吹制法生产的玻璃培养皿。本标准不适用于特殊用途的培养皿。

petri dish

ISO 12771:1997 实验室塑料器皿 一次性血清吸量管

This International Standard specifies requirements for disposable plastics serological pipettes, gauged to deliver, suitable for general laboratory purposes.

Plastics laboratory ware - Disposable serological pipettes

ISO 4798:1997 实验室玻璃器皿 过滤漏斗

This International Standard specifies requirements and dimensions for glass filter funnels suitable for general laboratory purposes, fitting together with other general-use glassware such as boiling flasks and volumetric flasks. NOTE — Annex A lists additional International Standards for other general-purpose laboratory glassware.

Laboratory glassware - Filter funnels

ISO 4785:1997 实验室玻璃器皿 通用直孔玻璃活栓

This International Standard specifies requirements and dimensions for two series of glass straight-bore stopcocks for general-purpose use. The stopcocks are defined by their nominal (bore) diameter and large end diameter and length of the ground zone. It is recommended that, in national standards, only one of the series should be specified. NOTE — Annex A lists additional International Standards for other general-purpose laboratory glassware.

Laboratory glassware - Straight-bore glass stopcocks for general purposes

ISO 12772:1997 实验室玻璃器皿 一次性微量血球容量计毛细管

This International Standard provides details for two types of disposable glass capillary tubes, suitable for the microhaematocrit test and other analytical tests which include a separation of plasma and cells. The details specified are in conformity with ISO 8417, to the greatest possible extent. WARNING — Capillary tubes can break during the analytical test procedure, resulting in broken sharp glass, blood spillage and aerosols. Appropriate precautions shall be taken to avoid dangerous infections.

Laboratory glassware - Disposable microhaematocrit capillary tubes

BS ISO 4795:1997 实验室玻璃器皿.温度计球头玻璃

This International Standard specifies the physical and chemical characteristics and the marking of thermometric glass and the test methods to be used for the selection of glass for the manufacture of the bulbs of liquid-in-glass thermometers. It is not applicable to the glass used in parts of the thermometer other than the bulb (e.g. the stem). However, the glass used for the other parts can be identical to that used for the bulb. The coefficient of linear thermal expansion of the bulb glass should not differ from that of the glass intended for the stem by more than 0,2 × 10 K

Laboratory glassware - Glass for thermometer bulbs

ISO 1773:1997 实验室玻璃器皿 细颈烧瓶

This International Standard specifies requirements and dimensions for an internationally acceptable series of conical flasks and of flat-bottom and round-bottom flasks for general laboratory purposes. The flasks are provided for - direct use in a laboratory, fitting together with other equipment for general laboratory purposes; - further work up to other products. NOTE — Annex A lists additional International Standards for other general-purpose laboratory glassware.

Laboratory glassware - Narrow-necked boiling flasks

ISO 4142:1997 实验室玻璃器皿.试管和培养管

Laboratory glassware - Test tubes and culture tubes

ASTM E1403-97(2013) 实验室玻璃烧瓶的标准规范

1.1 This specification provides standard dimensional requirements for flat-bottom and round-bottom glass boiling flasks. Note 1—For packaging standards, choose among the following standards, E920, E921, E1133, and E1157. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Laboratory Glass Boiling Flasks

ASTM E1878-97 专用实验室玻璃容量瓶的标准规范

1.1 This specification covers requirements for glass volumetric flasks of precision grades suitable for laboratory purposes and of specialty use. Each flask shall be marked with the letter "A" to signify compliance with applicable construction and accuracy requirements. Flasks may be marked with an identification number (serial number) at the option of the manufacturer. Note 1- Specifications for standard volumetric flasks are given in specification E 288. Note 2- Specifications for microvolumetric flasks in sizes from 1 to 25 mL are given in specification E 237. 1.2 The values stated in SI units are to be regarded as the standard.

Standard Specification for Laboratory Glass Volumetric Flasks, Special Use

ASTM E1878-97(2003) 专用实验室玻璃容量瓶的标准规范

1.1 This specification covers requirements for glass volumetric flasks of precision grades suitable for laboratory purposes and of specialty use. Each flask shall be marked with the letter "A" to signify compliance with applicable construction and accuracy requirements. Flasks may be marked with an identification number (serial number) at the option of the manufacturer.Note 18212;Specifications for standard volumetric flasks are given in specification E 288.Note 28212;Specifications for microvolumetric flasks in sizes from 1 to 25 mL are given in specification E 237.1.2 The values stated in SI units are to be regarded as the standard.

Standard Specification for Laboratory Glass Volumetric Flasks, Special Use

ASTM E923-97(2003) 可重复使用的玻璃韦斯特格伦氏管用标准规范

1.1 This specification describes requirements for a tube that measures the erythrocyte sedimentation rate (ESR). ESR is the suspension stability of red cells in diluted, anti-coagulated human blood.1.1.1 The use of the term "rate" is, strictly speaking, not correct. The test measures the amount of settling of red cells after a specified time.1.2 The tubes are used together with a special rack to ensure they remain in a vertical position during the test.1.3 This specification includes many dimensional requirements that are, for the most part, in agreement with the British Standards Institution, German Standards Institute, International Committee for Standardization in Haematology, and the National Committee for Clinical Laboratory Standards publications on Westergren tubes. The clinical procedure using the tube described in this specification is known as the "Westergren Method."1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Glass Westergren Tube, Reusable

ASTM E923-97 可重复使用的玻璃韦斯特格伦氏管

1.1 This specification describes requirements for a tube that measures the erythrocyte sedimentation rate (ESR). ESR is the suspension stability of red cells in diluted, anticoagulated human blood. 1.1.1 The use of the term "rate" is, strictly speaking, not correct. The test measures the amount of settling of red cells after a specified time. 1.2 The tubes are used together with a special rack to ensure they remain in a vertical position during the test. 1.3 This specification includes many dimensional requirements that are, for the most part, in agreement with the British Standards Institution, German Standards Institute, International Committee for Standardization in Haematology, and the National Committee for Clinical Laboratory Standards publications on Westergren tubes. The clinical procedure using the tube described in this specification is known as the "Westergren Method." Note-For packaging standards, choose among the following standards: Specification E920, Specification E921; Practice E1133, and Specification E1157. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Glass Westergren Tube, Reusable

ASTM E1403-97 实验室玻璃烧瓶

1.1 This specification provides standard dimensional requirements for flat-bottom and round-bottom glass boiling flasks. Note-For packaging standards, choose among the following standards, E 920, E 921, E 1133, and E 1157.

Standard Specification for Laboratory Glass Boiling Flasks