P00 标准化、质量管理 标准查询与下载

SANS 10120-2 GE:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第GE节：预制混凝土（结构）

To meet requirements imposed by various norms of economic development.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section GE: Precast concrete (structural)

SANS 10120-3 MM:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第MM节：辅路

Ancillary roadworks

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MM: Ancillary roadworks

SANS 10120-5 DE:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第DE节：小型土坝

Small earth dams

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section DE: Small earth dams

SANS 10120-2 DE:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第DE节：小型土坝

To meet requirements imposed by various norms of economic development.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section DE: Small earth dams

SANS 10120-4 AD:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分：标准工程数量表．第AD节：概述（小型水坝）

Covers schedules of quantities for small dams.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section AD: General (small dams)

SANS 10120-5 GE:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第GE节：预制混凝土（结构）

Precast concrete (structural)

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section GE: Precast concrete (structural)

SANS 10120-3 GE:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第GE节：预制混凝土（结构）

Precast concrete (structural)

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section GE: Precast concrete (structural)

SANS 10120-3 DE:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第DE节：小型土坝

Small earth dams

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section DE: Small earth dams

SANS 10120-2 MM:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第MM节：铺路

To meet requirements imposed by various norms of economic development.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MM: Ancillary roadworks

SANS 10120-5 MM:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第MM节：铺路

Ancillary roadworks

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MM: Ancillary roadworks

SANS 10120-4 DE:1984 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分：标准工程数量表．第DE节：小型土坝

Small earth dams

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section DE: Small earth dams

ASTM E541-84(1998)e1 从事建成楼房的系统分析和合格保证的机构的标准规范

1.1 This standard was initiated to meet the needs of regulatory programs for the certification of manufactured building. The various statutes differ somewhat in the responsibilities assigned to the administrative agency responsible for implementing the rules and regulations for manufactured building. The administrative agency may utilize the services and facilities of building-evaluation agencies in carrying out its responsibilities for evaluating manufactured building systems. By providing criteria for evaluating these agencies, this standard''s objective is to (1) utilize the voluntary standards system to provide a common base for the various regulatory approaches employed by the authorities having jurisdiction, and (2) make provision for varying degrees of optional technical support for the certification of manufactured building.1.2 To establish an appropriate degree of intra- and inter-state credibility regarding building system evaluations made through governmental or private agencies, the authorities having jurisdiction may wish to utilize an accreditation program for such agencies.1.3 Building-evaluation organizations examined under this standard may include both governmental and private agencies qualified to act on behalf of the public as designee agents (that is, agencies) of the government office having jurisdiction.1.4 This standard covers criteria by which the technical resources of agencies, both governmental and private, may be evaluated for their capability to perform the system analysis or compliance assurance function, or combination thereof, in the evaluation and inspection (certification) of manufactured building. Practice E 651 may be used for the evaluation of such agencies.1.5 These criteria set forth the minimum personnel requirements and the technical and organizational procedures required for agencies engaged in evaluating manufactured building. Other criteria such as independence, financial stability, and objectivity may need to be considered.1.6 Criteria are included for agencies evaluating innovative as well as conventional building systems, against applicable requirements.1.7 Agencies involved in testing, quality assurance and evaluating building components can be evaluated by using Practice E 691.1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

SANS 10120-5 HE:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第HE节：结构铝产品

Structural aluminiumwork

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section HE: Structural aluminiumwork

SANS 10120-2 HE:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第HE节：结构铝产品

To meet requirements imposed by various norms of economic development.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section HE: Structural aluminiumwork

SANS 10120-2 MK:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第2部分：项目规范．第MK节：边石和沟渠

To meet requirements imposed by various norms of economic development.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section MK: Kerbing and channeling

SANS 10120-3 HE:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第HE节：结构铝产品

Structural aluminiumwork

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section HE: Structural aluminiumwork

SANS 10120-3 MK:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第3部分：设计指南．第MK节：边石和沟渠

Kerbing and channelling

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 3: Guidance for design Section MK: Kerbing and channeling

SANS 10120-5 MK:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第5部分：合同管理．第MK节：边石和沟渠

Kerbing and channelling

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 5: Contract administration Section MK: Kerbing and channelling

SANS 10120-4 MK:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分：标准工程数量表．第MK节：边石和沟渠

The explanation of the format and content of standardized civil engineering specifications and also give guidance on the drafting of project specifications and other contract documents.

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section MK: Kerbing and channelling

SANS 10120-4 HE:1983 与土木工程施工和合同文件用标准化规范同时使用的操作守则．第4部分：标准工程数量表．第HE节：结构铝产品

Structural aluminiumwork

Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 4: Typical schedule of quantities Section HE: Structural alumuniumwork