P24 砌体结构工程 标准查询与下载

DIN EN 846-13:2001 砖石工程用辅助元部件试验方法.第13部分:有机覆层耐冲击、抗磨损和耐腐蚀性测定

This European Standard specifies a method for determining the level of performance of those organic coatings classified in prEN 845-1 and prEN 845-2 as type 2 applied as a protective system to zinc coated steel plate use in the fabrication of ancillary components for masonry.

Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings; German version EN 846-13:2001

JGJ/T 136-2001 贯入法检测砌筑砂浆抗压强度技术规程

Technical specification for testing compressive strength of masonry mortar by penetration resistance method

JGJ 137-2001 多孔砖砌体结构技术规范

Technical code for perforated brick masonry structures

DD ENV 1996-2-2001 欧洲法规6.砖砌结构件的设计.砖石材料的设计、选择和施工(结合英国国家应用文件一起使用）

Eurocode 6. Design of masonry structures. Design, selection of materials and execution of masonry (together with United Kingdom National Application Document)

DB50/ 5018-2001 建筑边坡支护技术规范

为使边坡工程勘察、设计、施工、监测及监理工作规范化，做到安全适用、技术先进、经济合理、确保质量和保护环境，制定本规范。本规范适用于重庆地区建筑边坡工程的勘察、设计、施工、监测和监理，重庆地区的其它边坡工程可参照执行。

Technical Specification for Retaining Structures in Excavation

BS EN 771-6:2001 圬工砌块规范.天然石块

Specification for masonry units - Natural stone masonry units

NF P12-312:2001 圬工灰浆试验方法.第12部分:衬底上的硬化打底和粘着灰浆粘结强度测定

Methods of test for mortar for masonry - Part 12 : determination of adhesive strength of hardened rendering and plastering mortars on substrates.

ASTM C1232-01 砖石工程标准术语

1.1 This terminology covers generic terms and generic definitions of terms specifically associated with masonry.

Standard Terminology of Masonry

ASTM C1314-01 砌砖棱柱抗压强度的标准测试方法

1.1 This test method covers procedures for masonry prism construction and testing, and procedures for determining the compressive strength of masonry, f''mt'', used to determine compliance with the specified compressive strength of masonry, f `m''. When this test method is used for research purposes, the construction and test procedures within serve as a guideline and provide control parameters.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Compressive Strength of Masonry Prisms

JGJ 98-2000 砌筑砂浆配合比设计规程

Specification for mix proportion design of masonry mortar

NF P12-609:2000 圬工辅助成份试验方法.第9部分:梁的耐挠曲和耐剪切性测定

Methods of test for ancillary components for masonry - Part 9 : determination of flexural resistance and shear resistance of lintels.

NF P12-702:2000 圬工试验方法.第2部分:挠曲强度的测定

Methods of test for masonry - Part 2 : determination of flexural strength.

NF P12-311:2000 圬工灰浆试验方法.第11部分:硬化灰浆的柔性和压缩强度测定

Methods of test for mortar for masonry - Part 11 : determination of flexural and compressive strength of hardened mortar.

DIN EN 1052-4:2000 圬工试验方法.第4部分:包括防潮层的剪切强度的测定

The document specifies a method for determining the in plane shear strength of horizontal bed joints in masonry incorporating sheet damp proof course material using a specimen tested in double shear with load applied perpendicular to the bed joints.

Methods of test for masonry - Part 4: Determination of shear strength including damp proof course; German version EN 1052-4:2000

DIN EN 772-13:2000 圬工品试验方法.第13部分:圬工品湿密度和干总密度测定

The document specifies a method of determining the net and gross dry density of masonry units. After drying to constant mass and calculating the net and gross volume, the net and gross dry density of the masonry units are calculated.#,,#

Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); German version EN 772-13:2000

DIN EN 772-19:2000 圬工品试验方法.第19部分:大型水平多孔砖圬工品吸湿膨胀测定

The document specifies an accelerated method for determining the moisture expansion of large clay masonry units with horizontal perforation that have one dimension equal to or greater than 400 mm and shell thickness less than 12 mm.

Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units; German version EN 772-19:2000

DIN EN 772-15:2000 圬工品试验方法.第15部分:高压蒸汽加气混凝土圬工品水蒸汽渗透率测定

The document specifies a method of determining the steady state water vapour permeability of autoclaved aerated concrete masonry units at the upper and lower part of the hygroscopic range. The test method is limited to products from which disc shaped specimens of uniform thickness can be made.

Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; German version EN 772-15:2000

ISO 9652-4:2000 砌体工程 第4部分:试验方法

This part of ISO 9652 specifies reference methods for testing a) the compressive strength of masonry units; b) the compressive strength of masonry; c) the flexural strength of masonry; d) the water absorption of clay units; and e) the compressive strength of mortar. It is applicable to masonry built with units of fired clay, calcium silicate, concrete (including autoclaved aerated concrete), natural stone or manufactured stone. NOTE The methods may be suitable for testing other walling materials, but they have not been examined as reference tests in this respect.

Masonry - Part 4: Test methods

BS EN 772-1:2000 圬工砌块的试验方法.抗压强度的测定

This European Standard specifies a method for determining the compressive strength of masonry units.

Methods of test for masonry units - Determination of compressive strength

BS EN 772-13:2000 圬工砌块的试验方法.圬工砌块净重和毛重干密度的测定

This European Standard specifies a method of determining the net and gross dry density of masonry units (except for natural stone masonry units).

Methods of test for masonry units - Determination of net and gross dry density of masonry units (except for natural stone)