Q17 屋面、铺面防水与防潮材料 标准查询与下载
共找到 1393 条与 屋面、铺面防水与防潮材料 相关的标准，共 93 页
本标准规定了聚合物水泥防水砂浆(简称JF防水砂浆）的术语和定义、分类和标记、-般要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑工程用的聚合物水泥防水砂浆。
Polymer modified cement mortar for waterproof
- ICS
- 91.120.30
- CCS
- Q17
- 发布
- 2011-12-20
- 实施
- 2012-07-01
This European Standard specifies the definitions and requirements of prefabricated polymer modified bituminous thick coatings used for the waterproofing of below ground structures. it applies to both one-component and two-component products.
Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements; German version EN 15814:2011
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-11-01
- 实施
Building works - Roof covering made of fiber-cement corrugated sheets - Part 1-2 : general criteria for selection of materials.
- ICS
- 91.060.20;91.100.40
- CCS
- Q17
- 发布
- 2011-09-01
- 实施
- 2011-09-03
Building works - Roof covering made of fiber-cement corrugated sheets - Part 1-1 : contract bill of technical model clauses.
- ICS
- 91.060.20;91.100.40
- CCS
- Q17
- 发布
- 2011-09-01
- 实施
- 2011-09-03
Building works - Roof covering made of fiber-cement corrugated sheets - Part 2 : contract bill of special administrative model clauses.
- ICS
- 91.060.20;91.100.40
- CCS
- Q17
- 发布
- 2011-09-01
- 实施
- 2011-09-03
Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods; German version EN 544:2011
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-09
- 实施
This European Standard specifies two methods (method A and method B) for determining the crack bridge properties of polymer modified bituminous thick coatings for waterproofing. The two test methods may be applied equally.
Polymer modified bituminous thick coatings for waterproofing. Determination of crack bridging ability
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
This European Standard specifies a procedure for determining the reduction in the thickness of polymer modified bituminous thick coatings due to drying for waterproofing.
Polymer modified bituminous thick coatings for waterproofing. Reduction of the thickness of the layer when fully dried
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
This European Standard specifies a procedure for determining the resistance to rain of polymer modified bituminous thick coatings for waterproofing.
Polymer modified bituminous thick coatings for waterproofing. Resistance to rain
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
This European Standard specifies the definitions and requirements of prefabricated polymer modified bituminous thick coatings used for the waterproofing of below ground structures. It applies to both onecomponent and two-component products. These products can be used with or without inlay. This European Standard does not apply to products that are to be used for roof waterproofing.
Polymer modified bituminous thick coatings for waterproofing. Definitions and requirements
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
This European Standard specifies a procedure for determining the resistance to compression of polymer modified bituminous thick coatings for waterproofing.
Polymer modified bituminous thick coatings for waterproofing. Resistance to compression
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
This European Standard specifies a procedure for determining the flexibility of polymer modified bituminous thick coatings for waterproofing at low temperature.
Polymer modified bituminous thick coatings for waterproofing. Determination of flexibility at low temperatures
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
Polymer modified bituminous thick coatings for waterproofing. Definitions and requirements
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
This European Standard specifies a procedure for determining the water resistance of polymer modified bituminous thick coatings for waterproofing.
Polymer modified bituminous thick coatings for waterproofing. Water resistance
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
This European Standard specifies a procedure for determining the dimensional stability at a high temperature of polymer modified bituminous thick coatings for waterproofing.
Polymer modified bituminous thick coatings for waterproofing. Determination of dimensional stability at high temperature
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-08-31
- 实施
- 2011-08-31
This European Standard specifies the properties, performance and methods of test of the finished bitumen shingles prior to them being laid on the roof. It also includes rules for marking, labelling and provides a clause for evaluation of conformity. This European Standard does not include design requirements, installation techniques and roof system performance. This European Standard applies to bitumen shingles where the watertightness of the system is ensured by overlapping, by different adhesive systems or a combination of these, according to manufacturer’s installation instructions, intended to be laid as covering for pitched roofs and/or wall cladding. This European Standard applies only to bitumen shingles with a mineral reinforcement, synthetic reinforcement or a mixture of the two. In case of multilayer shingles each layer need to have the same type of reinforcement and same type of coating (ref. to Clause 8).
Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods
- ICS
- 75.140;91.100.50
- CCS
- Q17
- 发布
- 2011-07-31
- 实施
- 2011-07-31
This European Standard specifies the method to determine the emissivity of plastic, rubber and bitumen vapour control layers, underlays for walls and underlays for discontinuous roofing. It also defines a conditioning procedure for these product families in order to quantify the sensitivity of emissivity to humidity and temperature.
Flexible sheets for waterproofing - Determination of emissivity; German version EN 15976:2011
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-07
- 实施
本规程适用于新建、改建和扩建的乡村建筑中采用混凝土瓦的屋面工程的设计、施工和质量验收。
Technical specification for application of concrete tiles of rural residence
- ICS
- CCS
- Q17
- 发布
- 2011-06-28
- 实施
- 2011-10-01
This European Standard specifies a procedure for determining the water resistance of polymer modified bituminous thick coating for waterproofing.
Polymer modified bituminous thick coatings for waterproofing - Water resistance; German version EN 15817:2011
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-06
- 实施
This European Standard specifies a procedure for determining for determining the flexibility of polymer modified bituminous thick coating for waterproofing at low temperature.
Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures; German version EN 15813:2011
- ICS
- 91.100.50
- CCS
- Q17
- 发布
- 2011-06
- 实施
