Q31 建筑卫生陶瓷 标准查询与下载

BS ISO 13007-2:2013 瓷砖. 灰浆和胶粘剂. 胶粘剂的试验方法.

Ceramic tiles. Grouts and adhesives. Test methods for adhesives

BS ISO 13007-4:2013 瓷砖. 灰浆和胶粘剂. 灰浆的试验方法

Ceramic tiles. Grouts and adhesives. Test methods for grouts

KS L 2515-2013 碳纤维试验方法

이 표준은 탄소 섬유1)의 시험방법에 대하여 규정한다.

General rule testing methods for carbon fibers

DB31/ 742-2013 防水卷材单位产品能源消耗限额

本标准规定了防水卷材单位产品能源消耗（以下称能耗）限额的术语和定义、技术要求、统计范围和计算方法、节能管理与措施。 本标准适用于改性沥青基和高分子防水卷材生产企业的能耗计算、考核，以及对新建、扩建项目的能耗控制。

Energy consumption quota per unit product of waterproofing membrane

EN ISO 10545-9:2013 瓷砖.第9部分:抗热震性的测定

Dieser Teil von ISO 10545 legt ein Prufverfahren fest, mit dem die Temperaturwechselbestandigkeit von keramischen Fliesen und Platten unter ublichen Gebrauchsbedingungen bestimmt wird. Wenn nicht anders vereinbart, werden in Abhangigkeit von der Wasseraufnahme der Fliesen und Platten unterschiedliche Verfahren angewendet (Prufungen mit oder ohne Eintauchen). ANMERKUNG ISO 13006 enthalt Anforderungen an die Eigenschaften von Fliesen und Platten und andere nutzliche Informationen uber diese Erzeugnisse.

Ceramic tiles - Part 9: Determination of resistance to thermal shock

DIN EN 14891:2013 带胶粘剂瓷砖下液体用不透水制品.要求、试验方法、合格性评定、分类和名称.德文版本EN 14891-2012+AC-2012

Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation; German version EN 14891:2012 + AC:2012

ISO 10545-9:2013 陶瓷砖.第9部分:耐热冲击的测定

This part of ISO 10545 specifies a test method for determining the resistance to thermal shock of all ceramic tiles under normal conditions of use. Depending on the water absorption of the tiles, different procedures (tests with or without immersion) are used unless there is an agreement to the contrary.

Ceramic tiles.Part 9: Determination of resistance to thermal shock

DB31/ 711-2013 建筑涂料单位产品能源消耗限额

本标准规定了建筑涂料单位产品能源消耗（以下简称能耗）限额的术语和定义、技术要求、统计范围、统计方法及计算方法、节能管理与措施。 本标准适用于生产水性及溶剂型建筑涂料企业的单位产品能耗计算、考核以及对新建项目的能耗控制。

Energy Consumption Quotas per Unit Product of Architectural Coatings

BS EN ISO 14720-2:2013 生陶瓷和基本材料的测试 非氧化生陶瓷和基本材料的硫磺粉和颗粒的测定 电感耦合等离子发射光谱(ICP/OES)或氧气流燃烧后的离子色谱法

Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen

NF B40-675-2*NF EN ISO 14720-2:2013 陶瓷原料和基本材料的测试 非氧化陶瓷原料和基本材料的硫磺粉和颗粒的测定 第2部分 电感耦合等离子发射光谱(ICP/OES)或氧气流燃烧后的离子色谱法

Testing of ceramic raw and basic materials - Determination of content of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after

JC/T 2193-2013 供水系统中用水器具的噪声分级和测试方法

本标准规定在实验室条件下供水系统中用水器具的噪声测试的术语和定义、符号、实验室测试系统要求、测试设备要求、器具声压级测量方法、测试结果和分级、实验、报告内容、本标准适用于建筑物内,工作压力不大于1.0MPa,介质温度不大于90℃的用水器具(本标准中的主要用水器具包括水嘴、花洒、流量调节器、进水阀共四类产品、)产生的噪声测试和分级、

Test method and acoustic group on noise emission from appliances and equipment used in water supply installations

JC/T 2194-2013 陶瓷太阳能集热板

本标准规定了陶瓷太阳能集热板的术语和定义、规格型号、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于利用太阳辐射加热，传热工质为液体的陶瓷太阳能集热板。

Ceramic solar therm-collector panels

JC/T 2195-2013 薄型陶瓷砖

本标准规定了薄型陶瓷砖的术语和定义、分类、技术要求、试验方法、抽样和接收条件、标志和说明以及包装、运输和贮存等。本标准适用于吸水率不大于3%、表面积小于1.62 m的薄型陶瓷砖。

Thin ceramic tiles

JC/T 932-2013 卫生洁具排水配件

本标准规定了卫生洁具排水配件(以下简称排水配件)的术语和定义、材料、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等、本标准适用于安装在洗面器、洗涤槽、浴盆、净身器、淋浴房、小便器等产品上与重力排水管道相连接的排水配件、

Drainage fittings for sanitary wares

NF P62-104/A1:2013 弹性和纺织地板覆盖物.瓷砖边长、平边度和垂直度的测定.修改件1

Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles - Amendment 1

BS EN 16145:2012 卫生设备配件.水槽和脸盆龙头用可引出排水口.通用技术规范

Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification

ASME A112.19.2/CSA B45.1 + Update No. 1-2013 陶瓷卫生设备

Ceramic Plumbing Fixtures

ASTM C410-13(2017) 工业用地砖标准规范

1.1 This specification covers brick made from clay or shale or mixtures thereof and are suitable for surfacing industrial floors. Ceramic shapes known as quarry tile are not covered by this specification. 1.2 Terminology related to industrial floor brick is found in Terminology C1232. 1.3 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Industrial Floor Brick

ASME A112.19.14-2013 装有双冲水装置的六升抽水马桶

This Standard establishes physical, material, testing, and marking requirements for 6 Liter water closets that incorporate a water-conserving, dual-flushing feature into the fixture. The tests specified in this Standard are for the removal of liquid wastes and toilet tissue or other comparable waste loads that are expected when actuating the reduced flush feature of the unit. The use of alternate materials or methods is permitted, provided that the proposed material and method comply with the performance requirements and the intent of this Standard.

Six-Liter Water Closets Equipped with Dual Flushing Device

ANSI A108.1A-2013 湿设置方法中带有波特兰水泥砂浆的瓷砖安装

Installation of Ceramic Tile in the Wet-Set Method, with Portland Cement Mortar