Q40 耐火材料综合 标准查询与下载

JC/T 2272-2014 水泥窑用白云石砖

本标准规定了水泥窑用白云石砖的分类、技术要求、试验方法、检验规则以及包装、标志、运输、贮存和质量证明书。本标准适用于由煅烧过的白云石或煅烧白云石和氧化镁为主要原料制成的水泥窑用白云石砖。

Dolomite bricks for cement kilns

JC/T 2241-2014 预制混凝土检查井

本标准规定了预制混凝土检查井的术语和定义、分类、规格尺寸和标记、原材料和构造要求、技术要求、试验方法、检验规则、标志、运输和保管、使用规定以及出厂证明书。本标准适用于地下管道工程用圆形和矩形预制混凝土检查井,包括采用耐腐蚀混凝土材料制作的预制混凝土检查井。采用PVC防腐内衬或玻璃钢防腐内衬制作的防腐型预制混凝土检查井可参照本标准执行。

Prefabricated concrete manhole

BS EN ISO 10081-4:2014 致密定型耐火制品的分类.特殊产品

Classification of dense shaped refractory products. Special products

ISO 10081-4:2014 致密定型耐火制品的分类.第4部分:特殊产品

Classification of dense shaped refractory products - Part 4: Special products

JC/T 2232-2014 液晶玻璃生产用陶瓷溢流砖

本标准规定了液晶玻璃生产用陶瓷溢流砖的术语和定义、分类和标记、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于液品玻璃生产用陶瓷溢流砖。

Ceramic overflow brick for manufacture the LCD glass

YB/T 4131-2014 耐火材料用酚醛树脂

本标准规定了耐火材料用酚醛树脂的分类和型号、技术要求、试验方法、质量评定程序、包装、标志、运输、储存和质量证明书。本标准适用于耐火材料用固体和液体酚醛树脂。

Phenolic resin for refractories

ISO 16835:2014 耐火制品. 热膨胀量的测定

This International Standard specifies test methods for the thermal expansion of refractory products. It describes a method for determining the linear thermal expansion percentage, the linear thermal expansion curve, and the linear thermal expansion coefficient. This International Standard includes the following three test methods for the thermal expansion of refractory products: a) a contact method with a cylindrical test piece; c) a non-contact method. b) a contact method with a rod test piece; The characteristics of these methods are shown in Annex A.

Refractory products - Determination of thermal expansion

KS L 3509-2014 耐火砖及耐火砂浆的化学分析方法

이 표준은 내화 벽돌 및 내화 모르타르의 화학 분석 방법에 대하여 규정한다.

Chemical analysis of refractory bricks and refractory mortar

ASTM C704/C704M-14 耐火材料常温耐磨性的标准试验方法

4.1 This test method measures the relative abrasion resistance of various refractory samples under standard conditions at room temperature. 4.2 The abrasion resistance of a refractory material provides an indication of its suitability for service in abrasive environments. 4.3 The results obtained by this test method could be different than those obtained in service because of the different conditions encountered. 1.1 This test method covers the determination of relative abrasion resistance of refractory brick at room temperature. This test method can also be applied to castable refractories (see Metric Dimensions, Practice C861 and Practice C865) and plastic refractories (see Practice C1054). 1.2 Units—When values are stated in both SI and inch-pound units, the units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, use each system independently of the other. Combining values from the two systems may result in non-conformance with the standard. Several values are stated only in SI units as a matter of convention and to permit comparison of results. Included are the abrading media weight (grams), specimen weight (grams), specimen weight loss due to abrasion (grams), and the resultant volume loss (cubic centimeters). 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

ASTM C113-14 耐火砖的二次加热变化的标准试验方法

3.1 Refractory brick and shapes of different compositions exhibit unique permanent linear changes after heating or reheating. This test method provides a standard procedure for heating various classes of refractories with appropriate heating schedules. 3.2 Linear reheat changes obtained by this test method are suitable for use in research and development, also often used to establish written specifications between producers and consumers. 3.3 Care should be exercised in selecting samples that are representative of the product being tested and that the schedule selected is appropriate to the product. 1.1 This test method covers the determination of the permanent linear change of refractory brick when heated under prescribed conditions. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Note 1—Test methods incorporating additional provisions pertinent to specific refractory materials are given in the following Test Methods: C C179179, C C210210, and C C605605. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Reheat Change of Refractory Brick

KS F 2846-2013 防火门的隔烟测试方法

이 표준은 건축물에 설치되는 방화문을 통한 연기의 누설량을 측정하기 위한 시험방법에 대하여 규정한다.

Methods for measuring smoke penetration through door assemblies

KS F 1611-3-2013 建筑构造构建的耐火性能标准.第3部分:构造用集成材料横梁与柱子

이 표준은 구조용 집성재1)로 제조된 보와 기둥의 내화 성능2)에 대하여 규정한다.

Fire resistance performance for elements of building construction ― Part 3: Beams and columns made of structural glued laminated timber

KS F 2845-2013 光滑元件耐火测试方法

이 표준은 건축물에 설치되는 유리구획 부분의 한 면이 화재에 노출될 때의 내화 성능을 측정하기위한 시험방법에 대하여 규정한다.

Fire resistance test for glazed elements

KS L 3315-2013 耐火砖和塑料耐火材料抗剥落性试验方法

이 표준은 내화벽돌 및 내화단열벽돌(이하 벽돌이라 한다.)의 공랭법과 수랭법에 의한 스폴링 시험방법에 대하여 규정한다.

Testing method for spalling of refractory bricks and insulating fire bricks

KS L 3503-2013 可浇灌耐火材料抗压强度测定

이 표준은 캐스터블 내화물 및 경량 캐스터블 내화물(이하 캐스터블 내화물이라 한다.)의 양생 후, 건조 후 및 소성 후의 꺾임 강도와 압축 강도 시험방법에 대하여 규정한다.

Testing method for crushing strength and modulus of rupture of castable refractory

KS L 3116-2013 耐火砖线膨胀系数试验方法

이 표준은 내화물의 선열팽창률, 선열팽창률 곡선 및 선열팽창 계수를 구하기 위하여 비접촉법, 원통상 시험편을 이용한 접촉법 및 봉상 시험편을 이용한 접촉법에 의한 시험방법에 대하여 규정한다.

Test methods for thermal expansion of refractory

KS L 3317-2013 耐火砖透气性试验方法

이 표준은 정형 내화물 및 부정형 내화물의 통기율 시험방법에 대하여 규정한다.

Testing method for permeability to gases of refractory products

BS ISO 16334:2013 整体耐火材料制品.抗爆裂的测定

Monolithic refractory products. Determination of resistance to explosivespalling

ISO 16334:2013 整体耐火材料制品.抗爆裂的测定

This International Standard specifies a method for determining the resistance to explosive spalling of monolithic refractories.

Monolithic refractory products.Determination of resistance to explosive spalling

JC/T 2196-2013 水泥回转窑用耐火材料使用规程

本标准规定了水泥回转窑用耐火材料的术语和定义、衬里设计、施工、质量验收以及耐火材料的使用与维护等、本标准适用于水泥回转窑系统用耐火材料、

Using specifications of refractory materials for cement rotary kiln