Q40 耐火材料综合 标准查询与下载

DIN EN ISO 1927-6:2013 整体(粗制)耐火材料产品.第6部分:物理性质的测量(ISO 1927-6-2012).德文版本EN ISO 1927-6-2012

Monolithic (unshaped) refractory products - Part 6: Measurement of physical properties (ISO 1927-6:2012); German version EN ISO 1927-6:2012

DIN EN ISO 1927-8:2013 整体(粗制)耐火材料产品.第8部分:互补特性的测定(ISO 1927-8-2012).德文版本EN ISO 1927-8-2012

Monolithic (unshaped) refractory products - Part 8: Determination of complementary properties (ISO 1927-8:2012); German version EN ISO 1927-8:2012

DIN EN ISO 1927-7:2013 整体(粗制)耐火材料产品.第7部分:预成型试验(ISO 1927-7-2012).德文版本EN ISO 1927-7-2012

Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes (ISO 1927-7:2012); German version EN ISO 1927-7:2012

DIN EN ISO 1927-5:2013 整体(粗制)耐火材料产品.第5部分:试件的制备和处理(ISO 1927-5-2012).德文版本EN ISO 1927-5-2012

Monolithic (unshaped) refractory products - Part 5: Preparation and treatment of test pieces (ISO 1927-5:2012); German version EN ISO 1927-5:2012

DIN EN ISO 1927-2:2013 整体(粗制)耐火材料产品.第2部分:试验取样(ISO 1927-2-2012).德文版本EN ISO 1927-2-2012

This part of ISO 1927 gives guidance on the sampling of monolithic (unshaped) refractory materials for the purpose of inspection and testing for quality and general information on the reduction and treatment of samples prior to testing. It covers all materials formulated as monolithic refractory materials. NOTE The term "monolithic" is the preferred term,whereas "unshaped" is commonly used in Europe. For the purposes of this part of ISO 1927,the terms "monolithic" and "unshaped" can be used interchangeably.

Monolithic (unshaped) refractory products - Part 2: Sampling for testing (ISO 1927-2:2012); German version EN ISO 1927-2:2012

DIN EN ISO 1927-4:2013 整体(粗制)耐火材料产品.第4部分:浇注料稠度的测定(ISO 1927-4-2012).德文版本EN ISO 1927-4-2012

Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables (ISO 1927-4:2012); German version EN ISO 1927-4:2012

DIN EN ISO 1927-3:2013 整体(粗制)耐火材料产品.第3部分:原样表征(ISO 1927-3-2012).德文版本EN ISO 1927-3-2012

This part of ISO 1927 specifies the methods for the characterization of monolithic (unshaped) refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating),gunning materials tap hole clay,injection mixes,dry vibrating mixes,and ramming materials,as defined in ISO 1927-1. NOTE:A check list of appropriate tests is given in Annex A.

Monolithic (unshaped) refractory materials - Part 3: Characterization as received (ISO 1927-3:2012); German version EN ISO 1927-3:2012

DIN EN ISO 12677:2013 耐火制品的X射线荧光(XRF)化学分析方法.熔铸珠法(ISO 12677-2011).德文版本EN ISO 12677-2011

This International Standard specifies a method for the chemical analysis of refractory and technical ceramic raw materials,intermediates and products,by means of the X-ray fluorescence (XRF) fused cast-bead method. Typical materials that can be analysed by this standard are given in Clause 3. This International Standard is not applicable to non-oxide materials,such as silicon carbides or nitrides,etc. The method is applicable to a wide range of materials containing a wide range of elements.

Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011); German version EN ISO 12677:2011

BS EN ISO 1927-3:2012 整体(粗制)耐火材料产品.到货产品描述

Monolithic (unshaped) refractory products. Characterization as received

BS EN ISO 1927-4:2012 整体 (粗制) 耐火材料产品. 浇注料稠度的测定

Monolithic (unshaped) refractory products. Determination of consistency of castables

BS EN ISO 1927-7:2012 整体(粗制)耐火材料产品.预制件测定

Monolithic (unshaped) refractory products. Tests on pre-formed shapes

ASTM C90-13 耐火砖和异型砖模数系列的尺寸规格标准操作规程

1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from hydraulic cement, water, and mineral aggregates with or without the inclusion of other materials. There are three classes of concrete masonry units: (1) normal weight, (2) medium weight, and (3) lightweight. These units are suitable for both loadbearing and nonloadbearing applications. 1.2 Concrete masonry units covered by this specification are made from lightweight or normal weight aggregates, or both.Note 1—The requirements of this specification have been researched, evaluated, and established for over a century, resulting in the physical properties and attributes defined here. These requirements are uniquely and solely applicable to concrete masonry units manufactured on equipment using low or zero slump concrete and the constituent materials defined herein. Many performance attributes of concrete masonry units are indirectly accounted for, or inherently reflected within, the requirements of this specification without direct measurement, assessment, or evaluation. Applying the requirements of this specification to products that may be similar in appearance, use, or nature to those covered by this specification may not address all pertinent physical properties necessary to ensure performance or serviceability of the resulting construction in real-world applications under typical exposure environments. Products manufactured using alternative materials, manufacturing methods, or curing processes not covered by this specification should not be evaluated solely using the requirements in this specification; however, developers of new products can consider the property requirements of this specification as a beginning benchmark for unit performance. It is reasonable to test new products for system performance as well as unit performance. 1.3 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.Note 2—When particular features are desired such as surface textures for appearance or bond, finish, color, or particular properties such as density classification, higher compressive strength, fire resistance, thermal performance or acoustical performance, these features should be specified separately by the purchaser. Suppliers should be consulted as to the availability of units having the desired features.

Standard Specification for Loadbearing Concrete Masonry Units

ASTM C530-13(2017) 结构粘土非承重筛砖标准规范

1.1 This specification covers unglazed, structural clay, nonloadbearing screen tile. 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of tile extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 5) of this specification is beyond the scope of this standard. 1.3 Tile covered by this specification are manufactured from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. (See firing and fired bond in Terminology C1232). 1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Structural Clay Nonloadbearing Screen Tile

BS EN ISO 1927-2:2012 整体 (粗制) 耐火材料产品. 试验取样

Monolithic (unshaped) refractory products. Sampling for testing

BS EN ISO 1927-8:2012 整体(粗制)耐火材料产品.互补特性的测定

Monolithic (unshaped) refractory products. Determination of complementary properties

BS EN ISO 1927-5:2012 整体(粗制)耐火材料产品.试件的制备和处理

Monolithic (unshaped) refractory products. Preparation and treatment of test pieces

BS EN ISO 1927-6:2012 整体 (粗制) 耐火材料产品. 物理性质的测量

Monolithic (unshaped) refractory products. Measurement of physical properties

ISO 1927-7:2012 整体(粗制)耐火材料产品.第7部分:预成型试验

Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes

ISO 1927-4:2012 整体(粗制)耐火材料产品.第4部分:可浇铸材料稳定性的测定

This part of ISO 1927 describes methods for the determination and measurement of the consistency of dense and insulating castables as defined in ISO 1927-1. It is applicable to all types of dense regular castables, dense deflocculated castables and insulating castables to determine the liquid addition necessary for preparing test pieces according to ISO 1927-5.

Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables

ISO 1927-3:2012 整体(粗制)耐火材料产品.第3部分:原样表征

This part of ISO 1927 specifies the methods for the characterization of monolithic (unshaped) refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating), gunning materials tap hole clay, injection mixes, dry vibrating mixes, and ramming materials, as defined in ISO 1927-1. NOTE A check list of appropriate tests is given in Annex A.

Monolithic (unshaped) refractory products - Part 3: Characterization as received