Q40 耐火材料综合 标准查询与下载



共找到 850 条与 耐火材料综合 相关的标准,共 57

This part of ISO 1927 describes methods for the determination and measurement of the consistency of dense and insulating castables as defined in ISO 1927-1. It is applicable to all types of dense regular castables, dense deflocculated castables and insulating castables to determine the liquid addition necessary for preparing test pieces according to ISO 1927-5.

Monolithic (unshaped) refractory products - Part 4: Determination of consistency of castables

ICS
81.080
CCS
Q40
发布
2012-12
实施

Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes

ICS
81.080
CCS
Q40
发布
2012-12
实施

This part of ISO 1927 specifies methods for the preparation and treatment (curing, drying and firing) of test pieces from monolithic (unshaped) refractory materials. The methods are applicable to dense and insulating castables and to ramming materials with the four types of chemical composition defined in ISO 1927-1. The dimensions of the test pieces are specified and the preparation of the mixture, compaction methods, storage and post-treatment of the test pieces are described.

Monolithic (unshaped) refractory products - Part 5: Preparation and treatment of test pieces

ICS
81.080
CCS
Q40
发布
2012-12
实施

This part of ISO 1927 specifies the methods for the characterization of monolithic (unshaped) refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating), gunning materials tap hole clay, injection mixes, dry vibrating mixes, and ramming materials, as defined in ISO 1927-1. NOTE A check list of appropriate tests is given in Annex A.

Monolithic (unshaped) refractory products - Part 3: Characterization as received

ICS
81.080
CCS
Q40
发布
2012-12
实施

Monolithic (unshaped) refractory products - Part 1: Introduction and classification (ISO 1927-1:2012); German version EN ISO 1927-1:2012

ICS
81.080
CCS
Q40
发布
2012-11
实施

이 표준은 원자 흡수 분광법 및 유도결합 플라스마 원자 방출 분광법에 의하여 내화물의 화학

Chemical analysis of refractories-General requirements for wet chemical analysis, atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry methods

ICS
81.080
CCS
Q40
发布
2012-09-18
实施
2012-09-18

이 표준은 상온에서 정형 내화물(shaped refractory)의 내마모성에 대한 시험방

Methods of test for dense shaped refractory products-Determination of resistance to abrasion at ambient temperature

ICS
81.080
CCS
Q40
发布
2012-09-17
实施
2012-09-17

Monolithic (unshaped) refractory products. Introduction and classification

ICS
81.080
CCS
Q40
发布
2012-08-31
实施
2012-08-31

This part of ISO 1927 defines terms relating to monolithic (unshaped) refractory products and establishes a classification for the various types of product. Raw materials and crushed or granulated refractory materials, which do not contain any binder, are excluded.

Monolithic (unshaped) refractory products - Part 1: Introduction and classification

ICS
81.080
CCS
Q40
发布
2012-08
实施

This International Standard specifies the characteristics of rubber sheet floor coverings without backing. This International Standard includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service.

Resilient floor coverings - Specification for rubber sheet floor coverings without backing

ICS
97.150
CCS
Q40
发布
2012-08
实施

이 표준은 알루미노실리케이트 내화물 및 원료의 화학 분석을 위한 기구, 시약, 용해 및 중

Chemical analysis of aluminosilicate refractory products(alternative to the X-ray fluorescence method)-Part 1:Apparatus, reagents, dissolution and determination of gravimetric silica

ICS
81.080
CCS
Q40
发布
2012-07-26
实施
2012-07-26

이 표준은 알루미노실리케이트 내화물에 함유된 바인더 성분의 산화붕소(III) 정량에 대하여

Determination of boron(III) oxide in refractory products-Part 2:Acid extraction method for the determination of boron(III) oxide in binder components

ICS
81.040.01;81.060.01
CCS
Q40
发布
2012-05-02
实施
2012-05-02

이 표준은 탄화규소 함유 원료 및 내화물 제품의 화학 분석을 위한 정의 및 시료 준비를 위

Chemical analysis of silicon-carbide-containing raw materials and refractory products-Part 1:General information and sample preparation

ICS
81.080
CCS
Q40
发布
2012-05-02
实施
2012-05-02

이 표준은 탄화규소 함유 원료 및 내화물 제품을 특정 온도에서 열처리한 다음 질량 변화,

Chemical analysis of silicon-carbide-containing raw materials and refractory products-Part 2:Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon

ICS
81.080
CCS
Q40
发布
2012-05-02
实施
2012-05-02

이 표준은 탄화규소 함유 내화물의 총 질소, 질화규소로서의 질소, 총 산소 그리고 유리 금

Chemical analysis of silicon-carbide-containing raw materials and refractory products-Part 3:Determination of nitrogen, oxygen and metallic and oxidic constituents

ICS
81.080
CCS
Q40
发布
2012-05-02
实施
2012-05-02

이 표준은 0.01 % 이상의 산화붕소(III)를 함유한 내화물 및 원료의 산화붕소(III

Determination of boron(III) oxide in refractory products-Part 1:Determination of total boron(III) oxide in oxidic materials for ceramics, glass and glazes

ICS
81.040.01;81.060.01
CCS
Q40
发布
2012-05-02
实施
2012-05-02

Chemical analysis of refractory material glass and glazes - Determination of Fe<(hoch)2+> and Fe<(hoch)3+> by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011); German version EN ISO 14719:2011

ICS
81.040.10;81.060.10;81.080
CCS
Q40
发布
2012-03
实施

Method for determination of heat storage increase rate of high-radiation cladding heat accumulator

ICS
81.080
CCS
Q40
发布
2012-02-07
实施
2012-03-01

Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline.

ICS
81.040.10;81.060.10;81.080
CCS
Q40
发布
2012-02-01
实施
2012-02-25

Chemical analysis of refractory material glass and glazes. Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline

ICS
81.040.10;81.060.10;81.080
CCS
Q40
发布
2012-01-31
实施
2012-01-31



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号