Q40 耐火材料综合 标准查询与下载

GB/T 4984-1985 锆刚玉耐火材料化学分析方法

本标准适用于锆刚玉耐火材料的化学分析。

Chemical analysis methods of zirconia-alumina refractories

GB/T 3002-1982 耐火制品高温抗折强度试验方法

高温抗折强度：在高温下，规定尺寸的长方体试样在三点弯曲装置上受弯时所能承受的量大应力。 试验温度：试样张力面中点的温度。

Test method for modulus of rupture of refractory products at elevated temperature

GB/T 2992.1-2011(英文版) 耐火砖尺寸 第1部分：通用砖规范

Dimensions of refractory bricks—Part 1:Specification for general bricks

GB/T 10325-2012(英文版) 定形耐火制品验收、取样和检验规则

"Shaped refractory products—Rule of acceptance,sampling and inspection"

ISO 8840:2021 耐火材料. 颗粒体积密度(颗粒比重)的测定

This document specifies three methods for the determination of the bulk density of granular refractory materials (grain density) having a grain size larger than 2 mm: — Method 1: mercury method with vacuum; — Method 2: arrested water absorption method; — Method 3: vacuum method with spin dryer option according to ISO 5017. Method 1 is intended as the reference method. NOTE Depending on the nature of the material tested, the three methods can give different results. Any statement of the value of a bulk density can therefore be accompanied by an indication of the method used or to be used in case of dispute. The same method can be used for the determination of the volume of the sample, for selecting and preparing the sample, for calculating the bulk density and for presenting the test report.

Refractory materials - Determination of bulk density of granular materials (grain density)

JC/T 2598-2021 水泥预分解窑用耐火砖形状尺寸

Shape and dimensions of refractory bricks for cement precalcining kiln

API TR 981-2021 耐火材料在载荷下的热膨胀和蠕变试验方法的评价和比较（第一版）

Thermal Expansion Under Load and Creep of Refractories—An Evaluation and Comparison of Testing Methods (FIRST EDITION)

ASTM C832-00(2021) 测量负荷作用下耐火材料热膨胀和蠕变的标准试验方法

1.1?This test method covers the procedure for measuring the linear change of refractory specimens that are subjected to compressive stress while being heated and while being held at elevated temperatures. 1.2?This test method does not apply to materials whose strength depends o

Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load

NF B40-679:2020 耐火材料. 抗热震性试验方法

La présente norme spécifie le principe, les équipements, les éprouvettes, les procédures, l'expression des résultats et le rapport d'essai pour les méthodes d'essai de résistance aux chocs thermiques des matériaux réfractaires.La présente norme inclut trois méthodes d'essai. Chac

Refractories - Test methods for thermal shock resistance

YB/T 172-2020 硅砖定量相分析 X射线衍射法

Quantitative phase analysis of silica bricks by X-ray diffraction method

YB/T 4856-2020 鱼雷式混铁车用耐火砖形状尺寸

Shape and dimensions of refractory bricks for torpedo type iron mixer

YB/T 118-2020 耐火材料 气孔孔径分布试验方法

Test method for pore size distribution of refractory materials

YB/T 4855-2020 耐火砖用砌块形状尺寸

Shape and dimensions of refractory bricks

YB/T 4858-2020 用后耐火材料回收利用技术规范

Technical specifications for recycling of post-consumer refractory materials

DIN EN 993-10:2020 密实成形耐火制品的试验方法. 第10部分: 加热时尺寸永久变化的测定

This European standard describes three methods for the determination of the permanent change in dimensions on heating of dense shaped refractory products.

Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating; German version EN 993-10:2020

JC/T 60004-2019 玻璃窑用耐火材料使用规程

Regulations for the use of refractory materials for glass kilns

YB/T 4766-2019 耐火材料用工业硅中单质硅和二氧化硅的测定方法

Method for determination of elemental silicon and silica in industrial silicon for refractory materials

JC/T 2463-2018 水泥窑用耐火材料挂窑皮性静态试验方法

本标准规定了水泥窑用耐火材料挂窑皮性静态试验方法的原理、设备、样品、试验过程、结果计算及试验报告。 本标准适用于水泥窑用耐火材料挂窑皮性的测定。

Test method for adherence characteristics of refractories for cement kiln

JC/T 2467-2018 水泥窑用铁铝尖晶石

本标准规定了水泥窑用铁铝尖晶石的技术要求、试验方法、检验规则以及标志、包装、运输、贮存和质量证明书。 本标准适用于以工业氧化铝和铁鳞为主要原料，采用烧结法生产的铁铝尖晶石(主晶相化学式为FeO?AlO)。

Sintered hercynite for cement kilns

YB/T 2217-2018 球顶耐火砖形状尺寸

Shape and dimensions of dome refractory bricks