Q52 炭素材料 标准查询与下载

SAE AMS3892/1B-1992 GF400(2758)抗拉强度、33(228)抗拉模数的结构复合材料用碳纤维束或纱

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the suppliers grade or material designation. Carbon tow or yarn, derived from a polyacrylonitrile precursor, with typical 400 ksi (2758 MPa) tensile strength and 33 Msi (228 GPa) tensile modulus for use in general purpose structural composites requiring high tensile strength and moderate modulus of elasticity in tension

Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus

SAE AMS3892/2B-1992 GF300(2068)抗拉强度、50(345)抗拉模数的结构复合材料用碳纤维束或纱

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the suppliers grade or material designation. Carbon tow or yarn, derived from a polyacrylonitrile precursor, with typical tensile strength over 300 ksi (2068 MPa) and tensile modulus of 50 Msi (345 GPa) for use in general purpose structural composites requiring high modulus and moderately high tensile strength

Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus

SAE AMS3892/3B-1992 GF400(2760)抗拉强度、40(275)抗拉模数的结构复合材料用碳(石墨)纤维束或纱

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the suppliers grade or material designation. Carbon tow or yarn, derived from a polyacrylonitrile precursor, with typical 400 ksi (2758 MPa) tensile strength and 40 Msi (276 GPa) tensile modulus for use in general purpose structural composites requiring high tensile strength and moderately high modulus of elasticity in tension

Tow or Yarn, Carbon Fibers for Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus

SAE AMS3892/4B-1992 GF300(2068)抗拉强度、75(517)抗拉模数的结构复合材料用碳纤维束或纱

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the suppliers grade or material designation. Carbon fiber, derived from a pitch precursor, with typical 300 ksi (2068 MPa) tensile strength and 75 Msi (517 GPa) tensile modulus for use in general purpose structural composites requiring very high modulus of elasticity and moderately high tensile strength

Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile ModuluS

SAE AMS3892/5B-1992 GF220(1517)抗拉强度、75(517)抗拉模数的结构复合材料用碳纤维束或纱

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the suppliers grade or material designation. Carbon tow or yarn, derived from a polyacrylonitrile precursor, with typical 220 ksi (1517 MPa) tensile strength and 75 Msi (517 GPa) tensile modulus for use in general purpose structural composites requiring very high modulus of elasticity and moderately high tensile strength

Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus

SAE AMS3892/6A-1992 GF325(2241)抗拉强度、57(393)抗拉模数的结构复合材料用碳纤维束或纱

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the suppliers grade or material designation. Carbon tow or yarn, derived from a polyacrylonitrile precursor, with typical 325 ksi (2241 MPa) tensile strength and 57 Msi (393 GPa) tensile modulus for use in general purpose structural composites requiring moderately high tensile strength and high modulus of elasticity in tension

Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus

SAE AMS3892/7A-1992 GF(OX)400(2758)抗拉强度、33(228)抗拉模数的结构复合材料用碳纤维束或纱

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the suppliers grade or material designation. Carbon tow or yarn, derived from a polyacrylonitrile precursor, with typical 400 ksi (2758 MPa) tensile strength and 33 Msi (228 GPa) tensile modulus for use in polyimide matrix structural composites or others which may be exposed to 315 degrees C (599 degrees F) thermal conditions in air and which require high tensile strength and moderate modulus of elasticity in tension

Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus

SAE AMS3892/8A-1992 GF(OX)400(2758)抗拉强度、40(276)抗拉模数的结构复合材料用碳纤维束或纱

This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the suppliers grade or material designation. Carbon tow or yarn, derived from a polyacrylonitrile precursor, with typical 400 ksi (2758 MPa) tensile strength and 40 Msi (276 GPa) tensile modulus for use in polyimide matrix structural composites or others which may be exposed to 315 degrees C (599 degrees F) thermal conditions in air and which require high tensile strength and moderate modulus of elasticity in tension

Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus

SAE AMS3892/9B-1992 500(3447)抗拉强度、32(221)抗拉模数的结构复合材料用碳纤维束

This specification covers one type of carbon fiber in the form of tow. Carbon tow with 500 ksi (3447 MPa) tensile strength and 32 Msi (221 GPa) tensile modulus for use in general purpose structural composites requiring high tensile strength and high modulus of elasticity in tension.

Tow, Carbon Fiber for Structural Composites 500 (3447) Tensile Strength, 32 (221) Tensile Modulus

SAE AMS3892/11A-1992 450(3103)抗拉强度、32(221)抗拉模数的结构复合材料用碳纤维束

This specification covers one type of carbon fiber in the form of tow. The product covered by this specification is multi-filament strands of fine carbon filaments having a nominal filament diameter of 7 microns (7 um) and containing either 3,000, 6,000, or 12,000 filaments per tow as specified by purchaser. Carbon tow with 450 ksi (3103 MPa) tensile strength and 32 Msi (221 GPa) tensile modulus for use in general purpose structural composites requiring high tensile strength and high modulus of elasticity in tension.

Tow, Carbon Fiber for Structural Composites 450 (3103) Tensile Strength, 32 (221) Tensile Modulus

BS 6043 Sec.4.10:1991 制铝工业用碳素材料的取样和试验方法.第4部分:冷捣糊块.第10节:热捣糊块的表观孔隙率的测定

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the apparent porosity of baked rammed paste

BS 6043 Sec.4.7:1991 制铝工业用炭素材料的取样和试验方法.第4部分:冷捣糊块.第7节:热捣试样块的制备和烘焙表观密度、体积的变化和质量损失的测定

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Preparation of baked rammed test pieces and determination of baked apparent density, change in volume and loss in mass

BS 6043 Sec.4.9:1991 制铝工业用炭素材料的取样和试验方法.第4部分:冷捣糊块.第9节:热捣糊块的冷压碎强度的测定

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the cold crushing strength of baked rammed paste

BS 6043 Sec.4.3:1991 制铝工业用炭素材料的取样和试验方法.第4部分:冷捣糊块.第3节:用二氯甲烷萃取后测定集料粒径分布

Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of aggregate size distribution after extraction by dichloromethane

BS 6043-4.3:1991 制铝工业用炭素材料取样和试验方法.第4部分:冷捣糊块.第3节:二氯甲烷萃取后集料粒径分布测定

Digestion with dichloromethane followed by sieving. Not applicable to products made from synthetic resins. To be read in conjunction with 6043-4.0, 6043-4.1

Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of aggregate size distribution after extraction by dichloromethane

YB/T 4038-1991 高炉用低温粗缝糊

Low temperature rough seam paste for blast furnace

YB/T 4037-1991 半石墨质高炉碳块

Semi-Graphite Blast Furnace Carbon Block

YB/T 4036-1991 高炉炭块铁水熔蚀指数试验方法

Test method for burnout indicator of carbon block and molten iron in blast furnace

YB/T 5291-1999 高炉炭块导热系数试验方法

Test method for thermal conductivity of carbon blocks in blast furnace

YB/T 5292-1999 高炉炭块氧化性试验方法

Test method for oxidizability of carbon blocks in blast furnace