共找到 48 条与 人工晶体 相关的标准,共 4 页
CVD diamond pen strips and abrasive grains
General technical conditions and testing methods for neodymium-doped calcium oxyborate gadolinium-yttrium laser self-doubling crystals
Potassium titanyl phosphate crystal for optical parametric oscillation
Relaxor ferroelectric crystal materials
This European Standard specifies a method for the determination of flexural strength under a concentrated load (breaking resistance) of agglomerated stone flat products.
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
Diese Internationale Norm legt eine Reihe von Beschreibungen für die Diamantindustrie fest und ist speziell zum Verständnis des Verbrauchers entwickelt worden. Die Norm enthält auch eine Reihe von Begriffen, deren Ziel es ist, für Händler weitere Klarheit zu schaffen und Kundenvertrauen in die gesamte Diamantenindustrie zu sichern. Diese Internationale Norm umfasst die Fachbezeichnungen, die von denjenigen benutzt werden, die im An- und Verkauf von Diamanten, behandelten Diamanten, synthetischen Diamanten, zusammengesetzten Diamanten und Diamantimitationen tätig sind.
Jewellery - Consumer confidence in the diamond industry (ISO 18323:2015)
本标准规定了熔融石英的要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于熔融石英。
Fused silica
本标准规定了宝石级合成立方氧化锆晶体的术语和定义、分级、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于无色透明宝石级合成立方氧化锆晶体(以下简称立方氧化锆)。
Gem grade synthetic cubic zirconia crystals
本标准规定了方石英的要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用方石英。
Cristobalite
本标准规定了钨酸铅(PbWO)闪烁晶体的术语和定义、技术要求、检测方法、检验规则、标志、包装、运输和贮存。 本标准适用于高能粒子探测用钨酸铅闪烁晶体
Lesd tungstate scintillation crystals
Both sellers and purchasers of alumina and quartz will find the test method useful to determine the specific surface area and indirectly as a measure of the particle size for material specifications, manufacturing control, and research and development.1.1 This test method covers the determination of the specific surface area of aluminas and silicas used in the manufacture of ceramics. The test method is a general one, permitting the use of any modern commercial nitrogen adsorption apparatus but strictly defining the outgassing procedure. Calculations are based on the Brunauer-Emmett-Teller (BET) equation. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
이 표준은 주로 화학플랜트 등에서 사용하는 유리제 장치 및 배관(이하 유리제 플랜트라 한다
Glass components for chemical plants
이 규격은 KS C 8527에 규정하는 결정계 태양 전지 셀ㆍ모듈 측정용 솔라 시뮬레이터(
Measuring method of output power crystalline solar cell modules
이 규격은 KS C 8527에 규정하는 결정계 태양 전지 셀ㆍ모듈 측정용 솔라 시뮬레이터(
Measuring method of output power for crystalline solar cells
이 규격은 평면ㆍ비집광형의 전력 발전을 목적으로 한 지상용 결정계 태양 전지 셀(이하 태양
Solar simulators used in measuringcrystalline solar cells and modules
이 규격은 KS C 0000(결정계 태양 전지셀.모듈 측정용 솔라 시뮬레이터)에 규정하는
Temperature coefficient measuring methods for crystalline solar cells and modules
本标准规定了金刚石玻璃刀的产品分类、技术要求、试脸方法、检验规则与标志、包装、运输、贮存。 本标准适用于手工裁划厚度为2-6mm平板玻璃的金刚石玻璃刀。
Diamond Glass Knife
本标准规定了金刚石圆镜机的产品分类、技术要求、试验方法、检验规则与标志、包装、运输、贮存。 本标准适用于手工裁划直径35~200mm,厚度1~3mm圆形平板玻璃的金刚石圆镜机。
Diamond round mirror machine
本标准规定了金刚石玻璃管割刀的产品分类、技术要求、试验方法、检验规则与标志、包装、运输、贮存。 本标准适用于手工切割壁厚为1~3mm玻璃管的金刚石玻璃管割刀。
Diamond glass tube cutter
Chemical analysis method for the calciumfluride in export fluorspar
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号