S30 机车车辆通用标准综合 标准查询与下载
共找到 393 条与 机车车辆通用标准综合 相关的标准，共 27 页
本标准规定了城市轨道交通中低速磁浮车辆悬浮控制系统的环境条件、一般要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于城市轨道交通中低速磁浮车辆悬浮控制系统的设计、制造、试验和验收。
Technical specification for the levitation control system of medium-low speed maglev vehicle of the urban rail transit
- ICS
- 45.060.20
- CCS
- S30
- 发布
- 2021-03-09
- 实施
- 2021-10-01 00:00:00.0
Specification for dynamic performance assessment and testing verification of rolling stock
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2019-12-10
- 实施
- 2020-07-01 00:00:00.0
本系列标准针对轨道车辆领域定义了承担新造和维修工作的焊接制造商的资质认证和质量要求。因而本系列标准将设计过程中的性能要求，生产过程中所达到的优质焊缝，以及通过检验展示出的满意的质量联系在一起。 本系列标准适用于轨道车辆及其零部件制造和维护过程中金属材料的焊接。 GB/T 25343的本部分对于轨道车辆及其零部件的焊接给出了总体建议和相关术语的定义。除了合同规定的特殊条款外，本部分适用于所有的焊接方法，包括GB/T 5185中定义的手工焊接、半自动焊、全机械化焊接或全自动焊接。 本部分适用于钢及铝合金的焊接，也包括铸件的焊接。 本系列标准不涉及产品认证。 本系列标准不适用于有特殊规定的设备部件，例如压力容器。
Railway applications.Welding of railway vehicles and components.Part 1:General
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2010-11-10
- 实施
- 2011-03-01
GB/T25343 的本部分规定了以下内容=焊缝的检验及试验=一破坏性试验和无损检测;一表述产品符合性所需的文件″本部分适用于轨道车辆及其零部件制造和维修过程中金属材料的焊接”
Railway applications.Welding of railway vehicles and components.Part 5:Inspection,testing and documentation
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2010-11-10
- 实施
- 2011-03-01
GB/T 25343的本部分规定了轨道车辆及其零部件制造、维护的设计和分级规则。 本标准适应于轨道车辆及其零部件制造和维护过程中金属材料的焊接。 本部分没有定义计算参数。
Railway applications.Welding of railway vehicles and components.Part 3:Design requirements
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2010-11-10
- 实施
- 2011-03-01
GB/T 25343的本部分规定了焊接制造商认证等级和相关质量要求，同时还规定了焊接制造商的认证程序。 本部分适应于轨道车辆及其零部件制造和维修过程中金属材料的焊接。
Railway applications.Welding of railway vehicles and components.Part 2:Quality requirements and certification of welding manufacturer
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2010-11-10
- 实施
- 2011-03-01
GB/T25343 的本部分规定了焊接的生产要求(例如:准备和实施等要求)。 本部分适用于轨道车辆及其零部件制造和维修过程中金属材料的焊接。
Railway applications.Welding of railway vehicles and components.Part 4:Production requirements
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2010-11-10
- 实施
- 2011-03-01
本标准规定了铁道机车车辆车端动力连接器的使用环境，型号标记、结构形式与接触对的编号排列，技术要求、试验方法、检验规则，包装储运等。 本标准适用于铁道机车车辆车端动力连接器的制造、检验和验收。
Vehicle end power couplers for locomotives and rolling stocks
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2010-09-02
- 实施
- 2010-12-01
本标准规定了铁道机车车辆车端电气通信（控制）连接器的使用环境，型号标记、结构形式与接触对的编号排列，技术要求、试验方法、检验规则，包装储运等。 本标准适用于铁道机车车辆车端电气通信连接器的制造、检验和验收。
Vechicle end electric communication (control) couplers for locomotives and rolling stocks
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2010-09-02
- 实施
- 2010-12-01
本标准规定了铁路机车司机室及客车内部噪声测量的条件、方法及报告内容。 本标准适用于铁路内燃、电力机车司机室及客车的内部噪声测量。
Measurement of noise inside railway vehicles
- ICS
- 17.140.30
- CCS
- S30
- 发布
- 1994-07-19
- 实施
- 1995-04-01
This document establishes aerodynamic requirements, test procedures, assessment methods and acceptance criteria for operating rolling stock in tunnels. Aerodynamic pressure variations, loads, micro pressure wave generation and further aerodynamic aspects to be expected in tunnel operation are addressed in this document. Requirements for the aerodynamic design of rolling stock and tunnels of the heavy rail system are provided. The requirements apply to heavy rail systems only.
Railway applications Aerodynamics Part 5: Requirements and assessment procedures for aerodynamics in tunnels
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2023-02-28
- 实施
- 2023-02-28
This document specifies special test methods applicable to cables, and their constituent insulating and sheathing materials, for use in railway rolling stock. Such cables are specified in the various parts of EN 50264, EN 50306 and EN 50382.
Railway applications - Railway rolling stock cables having special fire performance - Test methods; German version EN 50305:2020
- ICS
- 29.060.20
- CCS
- S30
- 发布
- 2021-01-00
- 实施
- 2021-01-01
This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.
Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer; German version EN 15085-2:2020
- ICS
- 25.160.01
- CCS
- S30
- 发布
- 2020-12-01
- 实施
Rolling stock -- Car body structure for passenger cars -- General rules for design
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2018-04-19
- 实施
Railway Applied Aerodynamics Part 2: Tunnel Aerodynamic Effects
- ICS
- ICS45.060.01
- CCS
- S30
- 发布
- 2018-04-12
- 实施
- 2018-11-01
Aerodynamics for railway applications Part 3: Tunnel aerodynamic requirements and test methods
- ICS
- ICS45.060.01
- CCS
- S30
- 发布
- 2018-04-12
- 实施
- 2018-11-01
Rolling Stock Crash Test Test Methods
- ICS
- ICS45.060.01
- CCS
- S30
- 发布
- 2018-04-12
- 实施
- 2018-11-01
Railway Applied Aerodynamics Part 4: Specifications for Numerical Simulation of Train Aerodynamic Performance
- ICS
- ICS45.060.01
- CCS
- S30
- 发布
- 2018-04-12
- 实施
- 2018-11-01
Railway Applied Aerodynamics Part 1: Symbols and Units
- ICS
- ICS45.060.01
- CCS
- S30
- 发布
- 2018-04-12
- 实施
- 2018-11-01
The standards of the entire "State of railway vehicles" contained technical specifications for systems and components of railway vehicles in accordance with DIN 25003 which are relevant to safety and require monitoring. The standards of the "State of rail vehicles" as a whole define the limit state for the safe operation of railway vehicles and their components. They shall be applied where the vehicles are operated on a public railway infrastructure. The minimum requirements laid down in the standards for the processes for observing the desired condition of the railway vehicles are also to be applied. In addition, the standards must also be observed in the new design if constructive precautions are to be taken to comply with the operating limit criteria. This standard applies to weld-related maintenance of railway vehicles. Each vehicle is assigned a maintenance-related body (ECM), which specifies the applicable regulations and their implementation for the weld-related maintenance. As an alternative to the requirements in Sections 4, 6, 7 and Annex D of DIN EN 15085-2: 2008-01, the classification of the components and components according to 5.1 and the qualification of the welding companies according to Annex C may be applied.
State of railway vehicles - Basic principles and production technology - Part 6: Welding
- ICS
- 45.060.01
- CCS
- S30
- 发布
- 2017-12-01
- 实施
