S34 通用零部件 标准查询与下载

DIN 25201-7 Berichtigung 1:2007 铁路车辆及其组件的设计指南.螺栓连接件.第7部分:安装.DIN 25201-7-2004技术勘误

Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation, Corrigenda to DIN 25201-7:2004-06

UIC OR 510-5-2007 单个车轮的技术认可.标准EN 13979-1用应用文件

This leaflet also applies to the wheels of powered axles. When making applications for the UIC technical approval of wheels made from grades ER8 and ER9 steel, regulations on the initiation and propagation of wheel tread defects shall be added to those contained in this document in order to obtain approval.

Technical approval of monobloc wheels.Application document for standard EN 13979-1

ASTM A65-07 钢轨道钉的标准规范

1.1 This specification covers steel track spikes used as fastenings between railroad rails, tie plates, and ties. 1.2 Three grades of spikes are described, Grades 1, a lower carbon steel; Grade 2, a higher carbon steel; and Grade 3, a carbon structural steel, conforming to Specification A 361.3 Supplementary Requirement (S1) are provided for use and shall only apply when specified in the purchase order.1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Steel Track Spikes

ASTM A65-07(2013) 钢轨道钉的标准规格

1.1 This specification covers steel track spikes used as fastenings between railroad rails, tie plates, and ties. 1.2 Three grades of spikes are described, Grades 1, a lower carbon steel; Grade 2, a higher carbon steel; and Grade 3, a carbon structural steel, conforming to Specification A36/A36M. 1.3 Supplementary Requirement (S1) are provided for use and shall only apply when specified in the purchase order. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Steel Track Spikes

ASTM A66-07(2013) 钢螺纹道钉的标准规格

1.1 This specification covers steel screw spikes used as fastenings between railroad rails, tie plates, and ties. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Steel Screw Spikes

NF F01-115:2006 轨道交通.轮副和行车机构.轮子.轮子踏板

Railway applications - Wheelset and bogies - Wheels - Wheels Tread.

TB/T 1429-2006 机车、动车用柴油机零部件.铸铁气缸套

本标准规定了机车、动车用柴油机零部件 铸铁气缸套的技术要求、检验规则、试验方法以及标志、包装、运输和贮存要求。 本标准适用于机车、动车用柴油机新造的缸径为φ180mm～280mmφ铸铁气缸套（以下简称气缸套）。

Componete parts of diesel engine for locomotive rail car.Cast iron cylinder liner

TB/T 1382-2006 机车、动车用柴油机零部件.活塞环

本标准规定了机车、动车用柴油机活塞环的技术要求、检验规则、试验方法以及标志、包装、运输和贮存要求。 本标准适用于机车、动车用柴油机活塞环。

Componete parts of diesel engine for locomotive rail car.Piston ring

TB/T 1715-2006 机车柴油机柱塞偶件密封性试验台技术条件

本标准规定了机车柴油机柱塞偶件密封性试验台（以下简称试验台）的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于以等压法进行柱塞偶件密封性试验的试验台。

Technical specification of pressure testing experiment for plunger and barred assembly of locomotive diesel engine

TB/T 1817-2006 机车、动车用柴油机零部件.气门

本标准规定了机车、动车用柴油机进、排气门（以下简称气门）的技术要求、检验方法与检验规则及标志、包装、运输和贮存要求。 本标准适用于气缸直径φ180mm～φ280mm的往复活塞式柴油机用气门。

Component parts of diesel engine for locomotive and rail car Valve

TB/T 2780-2006 机车、动车用柴油机零部件钢头铝裙组合活塞

本标准规定了机车、动车用柴油机钢头铝裙组合活塞的技术要求、检验规则、检验方法及标志、包装、运输和贮存要求。 本标准适用于机车、动车用柴油机新造的钢头铝裙组合活塞（以下简称活塞）。

Component parts of diesel engine for locomotive and rail car Composite piston with steel crown and aluminum skirt

TB/T 3135-2006 机车、动车用气体空气过滤器

本标准规定了机车、动车用车体空气过滤器的材料和结构要求、性能要求、试验方法、标识、包装、运输与贮存。 本标准适用于铁路各种类型机车、动车组及工矿机车车体进气系统的各种形式的空气过滤器。

Car body air filter for locomotive and rail car

DIN 25201-2:2006 铁路车辆及其组件的设计指南.螺栓连接.第2部分:设计.机械应用

Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical application

JIS E 5004-2:2006 铁道车辆的电气设备.第2部分:电工组件.一般规则

この規格は，JIS E 5004-1に規定する鉄道車両用電気品に対する一般便用条件茂び一般規則に加えて，鉄道車両の電力回路，補助回路，制御回路，表示回路などに使われる電気機器に関する一般的な規則について規定する。すなわち，この規格の目的は，鉄道車両のすべての電気機器に対してJIS E 5004-1に規定する一般規則を適合させたうえで，その対応する電気機器の範囲に対する要求及び試験の統一を図るものである。ここでいう電気機器とは，制御と無関係な，主として開閉機器及び制御機器であるが，リレー，制御弁，抵抗器，ヒューズなども含む。

Electric equipment for rolling stock -- Part 2: Electrotechnical components -- General rules

DIN VDE 0119-207-2:2006 铁路车辆状况.控制和测量仪表技术.第207-2部分:列车的遥控

State of the railway vehicles - Control and instrumentation technology - Part 207-2: Telecontrol of trains

DIN 26584-0002:2006 铁路车辆部件用术语.发动机和传动装置用支架.第2部分:传动装置用轴承

Terminology for railway vehicle components. Brackets for engines and transmissions. Part 2: Bearings for transmissions.

NF F01-363:2005 轨道交通.铁路车辆运行特性的验收试验.运行性能试验和稳定性试验

Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests.

TB/T 3118-2005 铁道车辆用合成闸片

Synthetic brake pads for railway vehicles

NF F01-520:2005 轨道交通.声学.测量轨道车辆产生的噪音

Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles.

NF F07-124-1/A2:2005 轨道交通.绝缘配合.第1部分:基本要求.所有电气和电子设备的间隙和蠕变距离

Railway applications - Insulation coordination - Part 1 : basic requirements - Clearances and creepage distances for all electrical and electronic equipment.